@@cody.onewheel Only so many hours in the day Cody! Here is a review from a customer. If you don't like the lift we will always refund you 100% of your money. "The #ignitelift exceeds my hopes! They transform the Onewheel capabilities on rough trails, steep carves and uphill obstacles. Went way more technical today than I would ever try with the stock balanced height. The uphill trail riding experience enables the nose to clear so many more rocks, roots or just steepness. The tail also has more clearance for rough downhills too. The Lift Kit raises, thus extends the moment arm my toes and heels can apply relative to the corner of the tire in a carve. Longer moment arm allows more torque to lean the board over farther. It also raises the weight of the deck which increases the angular momentum during a deep carve. This creates a stabilizing effect that surprisingly and comfortably countered the inherent increase of instability resulting from having the board center of gravity higher than the wheel’s axis of rotation. It felt both more nimbly in initiating carved and more stable in holding them. I was worried about twisting my ankles easier when the #onewheel rolls onto its side out from under you when you hit off camber obstacles (sharp rock on outer third), traction under the tire is too low (wet grass) or sand slides out. Yet with the #ignitelaunchpads EVA pad with epoxy paint sealed over perfectly spaced 24 grit and the treaded tire (30A) at about 15 psi I could recover most of the rollouts with ankle control"
Is it possible for you guys to make spacers for the rail guards? I bought a kit but if I cut my rail guards to fit your kit and I don't like it or want to rotate it or take it off, my rail kits got a big section cut out. Seems like a glaring oversight. Just hoping I like it enouph I don't care.
have you tried it without cutting the side rail guard? i get why the buttom rail guard piece would need to be cut so bolts line up but jacked out shouldn't be a problem unless the bolts are so exact in length that it won't work with the bolts they send. if so, couldn't you just go to the hardware store and get longer bolts? when i saw them suggest cutting the side guards i didn't understand why that's the case.
I would be curious to see this set up with WTF rails from Floatlife.. Love the idea of the scooped angle of the footpads with WTFs but it sounds like you lose clearance as a result. Not sure if using both things together would cancel out a bunch of benefits from each.. hmm.
FM does not release those specs. We recommend to tighten until SNUG then torx it another 1/8th turn. Before you remove you stock bolts get a feel for how tight FM tightened them for reference.
can you do another video with some ride footage and an explanation of why use it/ what it does for you?
Coming soon 😎
@@1wheelparts920 could you get a local rider who isnt as skilled to collab in the video and give their opinions?
@@1wheelparts920 *taps foot impatiently*
@@cody.onewheel Only so many hours in the day Cody! Here is a review from a customer. If you don't like the lift we will always refund you 100% of your money. "The #ignitelift exceeds my hopes! They transform the Onewheel capabilities on rough trails, steep carves and uphill obstacles. Went way more technical today than I would ever try with the stock balanced height. The uphill trail riding experience enables the nose to clear so many more rocks, roots or just steepness. The tail also has more clearance for rough downhills too. The Lift Kit raises, thus extends the moment arm my toes and heels can apply relative to the corner of the tire in a carve. Longer moment arm allows more torque to lean the board over farther. It also raises the weight of the deck which increases the angular momentum during a deep carve. This creates a stabilizing effect that surprisingly and comfortably countered the inherent increase of instability resulting from having the board center of gravity higher than the wheel’s axis of rotation.
It felt both more nimbly in initiating carved and more stable in holding them. I was worried about twisting my ankles easier when the #onewheel rolls onto its side out from under you when you hit off camber obstacles (sharp rock on outer third), traction under the tire is too low (wet grass) or sand slides out. Yet with the #ignitelaunchpads EVA pad with epoxy paint sealed over perfectly spaced 24 grit and the treaded tire (30A) at about 15 psi I could recover most of the rollouts with ankle control"
Can we see a video of a lowered wheel? Also will a bigger tire fit both lifted and lowered since it is away from the center?
I've been looking at this thing for a while, i was wondering if i put it on my growler can i fit a 5.5 tire on it with the lift kit?
Is it possible for you guys to make spacers for the rail guards? I bought a kit but if I cut my rail guards to fit your kit and I don't like it or want to rotate it or take it off, my rail kits got a big section cut out. Seems like a glaring oversight. Just hoping I like it enouph I don't care.
have you tried it without cutting the side rail guard? i get why the buttom rail guard piece would need to be cut so bolts line up but jacked out shouldn't be a problem unless the bolts are so exact in length that it won't work with the bolts they send. if so, couldn't you just go to the hardware store and get longer bolts? when i saw them suggest cutting the side guards i didn't understand why that's the case.
Oh! These look awesome! I wonder how these chance the ride experience! _m/
So how would you uninstall them?
I would be curious to see this set up with WTF rails from Floatlife.. Love the idea of the scooped angle of the footpads with WTFs but it sounds like you lose clearance as a result. Not sure if using both things together would cancel out a bunch of benefits from each.. hmm.
Wtf rails are made to lower center of gravity, if you oift it up I'm guessing it makes them rather useless
what is the correct tor spec so i can tighten it back to the correct amount ?
FM does not release those specs. We recommend to tighten until SNUG then torx it another 1/8th turn. Before you remove you stock bolts get a feel for how tight FM tightened them for reference.
🔥🔥🔥
Hi there, I like the design but I don’t want the lift nor the low rider, can you install it as is? No lifting and no lowering it! Thank you
Yes you can
@@1wheelparts920 how do you do it?