I really like how you went back over your work at the end and pointed out spots that weren't properly blended, that's dope and displays great craftsmanship...
great job!!! keep up the hard work ... big up's from Rochester New York... thanks for your time and videos...their a great inspiration and has helped me tremendously...
I set my lines with the old school double magnet gaurds and touch up with the new magnet gaurds because you really hear it cutttin with the new gaurds more then the old
I got my masters adjusted so nice I broke the back two peices so it closes past the first notch. and opens past the last notch. so im getting around a 0000 closed and about 1A open I get more out of my master exp when doin touch up work
this is a nice taper, but you should use this video but add comentary and let the audience know what your doing, as well as put the clipper comb sizes you use and how many notches from closed possition... just a sugestion...
How do I know what to do right behind the ear? Looks as if it wasn't touched one bit only the back and the side burn area....but not that little spot behind the ear whats the method?
need more help with open and closing lever , you just showed size of gaurds , so its no gaurd lever closed for first guide line , then lever open for 2nd guideline, then its 1/8?then 1/16 ? then 1/4? please respond , please & thank you.
will perez:mejor seria que fueras mostrando o diciendo el peine que estas usando ,para mejor comprencion de los que quieren aprender de tu oficio.gracias.
This is not a teaching video, it's just showing off their cut. Go figure out yourself by searching similar video on you tube. If he wanted to help he would already explain how and what to use the clipper and guards.
I really like how you went back over your work at the end and pointed out spots that weren't properly blended, that's dope and displays great craftsmanship...
This is one of the cleanest, crispiest, mastery of tapering I have seen. Attention to detail, no lines...100!
great job!!! keep up the hard work ... big up's from Rochester New York... thanks for your time and videos...their a great inspiration and has helped me tremendously...
thanks for the videos! always a pleasure watching them!
fresh and clean as usual bruh. another great cut. stay blessed
Waiting for my clippers to come in, this video helped a lot! Great blending
Nice, clean, awesome !
Janet Jade Nicole were can I get a haircut from u sweetheart.
hey will nice fades man you a pro for this barber life you have.
Best Taper Tutorial I ever seen
Greatest barber of all time
Dope im looking on becoming a Barberand thats exacly how ima cut props
I don't see no flaws! 👏💯
So crispy ! I appreciate your good work. It's very motivational. #Salute
SO CLEAN !!!
I set my lines with the old school double magnet gaurds and touch up with the new magnet gaurds because you really hear it cutttin with the new gaurds more then the old
Good job my boss may almighty god bless your hand work forever
the dude in the background 😂😂😂 8:26
HAHAHAHAHAHAHHAHAHA
with your help I will learn how to do this at home for my husband..
real smooth!
I have been watching a lot of barbers bro . top five dead or alive.. this is a blend
nice taper bro. learned allot.
Check out my taper tutorial . More good content !
That's dope bro!
I got my masters adjusted so nice I broke the back two peices so it closes past the first notch. and opens past the last notch. so im getting around a 0000 closed and about 1A open I get more out of my master exp when doin touch up work
Do you know if there is a vid showing this process
+Stickywolf18 yes it's called zero gap
clean asf
this is a nice taper, but you should use this video but add comentary and let the audience know what your doing, as well as put the clipper comb sizes you use and how many notches from closed possition... just a sugestion...
Buen dia hermano me podrias indicar el nombre de la primera maquina de afeitar que utilizaste ?
How do I know what to do right behind the ear? Looks as if it wasn't touched one bit only the back and the side burn area....but not that little spot behind the ear whats the method?
Middle Name it's the style cut a taper which is only lower back of head neck area and sides below temple
Man, you do it well, it's you, as we say here in venezuela..anthony venezuelan barber
bright light in the room always matters to do a great haircut huh? @Will.
hi will, show man ! perfect!
You should consider re-edit this video with the number guards that you use
Great work... will be better for me if you can describe what you're doing I'm a student.
Muito bom, experiência e técnica apuradas, parabéns!
need more help with open and closing lever , you just showed size of gaurds ,
so its no gaurd lever closed for first guide line , then lever open for 2nd guideline, then its 1/8?then 1/16 ? then 1/4? please respond , please & thank you.
Leon Morales
so your going from short to long, close, halfway, then fully opened on each guard
this video was helpful 🔥
What type of guards are you using for the andis of you don't mind telling me
mr perez....i just need a advice ....which product you recommend to grow the beard....i am a beardless....please help me....thank you
Genetics
is a name of a product?
+Luis Garcia Yes it is the name. You can find genetics in shop named evolution.....
Minoxidil, from kirkland is fine!!! I got mine in three months fuck genetics
LOL nice one
Blended
Cual es el peine 1/16 y 1/8 donde los consigo??
flame bro!
Clean tape. Dude in the back looks all tweaky with that scratcher lol
I hope that guy in the back shares his winnings in them scratch offs!lmao
How long does it take to do a taper cut
como se llama el nombre de la canción que se escucha en el video..
whats the name of the barber shop and where are you located?
He somewhere down south in Florida
What brand of clipmer do you used?
i want this cut to try out something new, what do i tell my barber to make him give me this exact one he has in the vid
what blade is it on the andis ? fade masters or original
Anybody know what guards he is using ? I have tried looking them up but I can't find them
Ivan Mendez im guessing he just opens and closes the lever a bit while doing it I'm not sure?
Will Perez explica como mover la macina o que usas
what guards are you using
ready!!!
y como hizo los taper de los lados q numeros de peinetas son de abajo hacia arriba porfavor alguien ... gracias
los números de peinetas Ban apareciendo cada vez que la cambia yo lo note asta la segunda vez que lo bi pero si pone atención ahy salen
what guard are those
BEAUTIFUL
What's the difference between a bald taper and a skin taper?
S. Garcia nothing, both the same
Gostaria de ver os pentes q vc usou...
nice job
will perez:mejor seria que fueras mostrando o diciendo el peine que estas usando ,para mejor comprencion de los que quieren aprender de tu oficio.gracias.
Se respondeu 👏👏
me gusto ese trabajo
yo I desperately need a cut. are u still in Homestead fl? what shop. hook me up. keep up the good work. God bless
where u guys located
Cómo se llama la canción??
Sick
What s name the music
TOP TOP LIKE !!!!
parabens!!!
can you at least explain when the guard is open or closed
👍👍
please explain the guard you're using...
he is you don't see the white numbers that's showing up on the screen them numbers represent the guard
Hola deberías de hacer videos comentados.
good
k buen fade
What song title 0:15
Naic
Good job but so late just for neck more than 7 minutes in UK great job and quickly job is important.
Falto explicar de los lados
top
Asi me corto el pelo yo solo pro no me queda igual alguien que me diga paso x paso x favor
Esta bien
This is not a teaching video, it's just showing off their cut. Go figure out yourself by searching similar video on you tube. If he wanted to help he would already explain how and what to use the clipper and guards.
süper
Cleen
amosay
FRE$H
Horrible tutorial complicates for people trying to learn
Cual es el peine 1/16 y 1/8 donde los consigo??
me gusto ese trabajo
Sick