yeah they need to do more old and new cars that people can relate too... and also it would be a great idea if they could help people who have stranded projects to finish them and then surprise them with a rebuilded project this way they get the views and their channel will grow... even with their home rebuild stuff maybe they can help people out with their houses? it would be great
Man that’s one beautiful truck. Secondly I’m happy pops is always working equally or even harder than the boys. Once he retired from truck driving he knew in his heart he wanted to be part of the Goonzquad and we’re all lucky to see him happy working alongside his boyz.
One thing you should do is do a video where you go over every build you have done, what has been your favorites and least favorites, most difficult and easiest etc. I think it would be an amazing video and a video that brings out a lot of memories for many of us
A sealer coat works wonders for paint color uniformity. Looks like the OEM paint is darker on the rear bumper and tailgate @21:54 is where you really see it stick out. Great job guys, great looking truck stock, absolutely love the color.
So glad you guys have got to where you can just have Pops around the shop helping out. Pops is allways busy and he's allways great to see and hear in the videos. So great to see success shared with him! 👍😁
You really need to be using sealer (DTM) on the new parts and the areas that have bare metal showing before spraying the base coat. You’ll find the colors will match better and take less coats as well. I know it’s typical used car lot work and a way to save a few bucks but in the long run the cost of the sealer will be worth it. If your set against sealer, at least spray rattle can primer(DTM preferred) over the bare spots. Base coat (solvent or water) is not a direct to metal product. Check your product technical data sheets for proper application instructions. You may never see it but whomever ends up with the vehicle will end up with paint flaking off and corrosion problems.
Paint deffo won’t flake off and it’s not essential to use a sealer yeah it’s worth it in the long run and I mean Lonnnng run but this truck will see the road probably once a month
@@jeremy_bragg The brands of paint I’ve used and use all recommend a specific shade of sealer for a reason. I’ve noticed it when doing spray outs. The differences between sealed and not sealed can be pretty different. Different shades of sealer can make a difference as well over the same color of base coat. I know these guys don’t get into doing spray outs and tinting colors. They should try it out. They’d have knew the color on the G wagon was off a few shades from the OEM color if they had done a spray out.
Yeah, it annoys me a lot when they don't use a sealer before spraying the base coat, they used to do it before but they just don't care anymore for some reason.
Taking a freshly painted truck to a car wash, to have dirt filled fabric dragged across it, just to get the reaction of said car wash's workers, sounds like an awesome idea! Big brain stuff right there!
Finally.. you guys have done right by a lifted truck. Now, that Tremor won't look like a Mall crawler. Smaller wheels and big tires are the way to go.! They look right.
Really respect the effort, the long hours, you guys put into these cars, and we don't even see all the behind the scenes stuff, the planning, the chasing potential new builds, chasing parts, editing, etc. As you were painting, I was thinking the quality of the paint jobs seems to have greatly improved in recent builds since you moved into your own booth (absolutely no personal expertise in this area), and then you said the same at 4:02 into the video! Really enjoy your content. Thank you.
Every factory color has a recommended VS (Value Shade) of sealer to use for best color match. Ranging all the way from white, grays & black. Not only will it give you protection against bare metal spots but will help in the amount of coats of paint it takes to cover and your color matching issues as well. Wherever you're getting your paint from should have a color deck of variants for the paint as well to help you narrow down the correct color depending on which manufacturing plant it was built at. Just a few words of advice if you care to fix the paint issues yall are having.
They are not tradesman and actually have no idea how to blend, you dont throw paint over the whole bonnet and say it’s blended, I’m a painter by trade and unfortunately they don’t know how to do it, look they do good, but they always have the same issue when painting, if they want there cars the same colour, they best just paint the whole car, it took me 4 years of training to learn my trade.
Unless I missed something, they went over bare metal in spots and just went straight to color over the e-coat and put no sealer down whatsoever. This truck will be the next giveaway truck, I bet
Out of all the gifts you'll tried to give me I'll take that truck in it's place,nice build ,I'm not mad .who gets this truck is going to have a nice ride. Alright pop's always wishing you and Momma the best.May God Bless each and every 1of you's Family's. AMEN
Get an clothing iron and use the steam to get the wrinkles out of the leather, that’s how they do it on the assembly line, just don’t leave it in one spot to long or you’ll burn/ discolor it
@@gvn-xk6eq the heat from the iron help smooth it out keep it from wrinkling again, unlike a steamer which isn’t going to do anything without heat the underside if the material
if they leave it parked outside as long as the windows aren't ceramic tinted the leather will flatten out over the course of a few weeks from the sun exposure.
@@nickb.249 agreed but not everyone wants to wait that long, like myself just a quick 10 mins process to do, but also if it stays cloudy then that’s longer you have to wait too
@@raynicklaus5720 mate I use to work in Nissan assembling the seats we used hog rings to put the material on and a steamer to get the creases out the company was called Lear Corporation if you’d like to check it out
When i worked for Jaguar Landrover show cars we had to do sprayout cards for every job. Nice library of colours 😂 a bit of WOW lads then colour. Buying in matched paint rarely works. Blend blend blend. Nice job on the rivets.
Yes V notch is required for proper glass setting . They really don’t know what they are doing and don’t seem to learn from others trying to educate them. They also typically choose products solely on price and try to cheap out on everything except for looks
I love it, now thats a sick daily... good taste so far. extra gas tank and locking bed tool crib drawers with extra leaf reinforcements so it doesnt sag in the rear. maybe a generator and air compressor bolted on. And some nice mounted kc lights and you have the perfect tow, work, play, rescue truck.... you guys needed a truck like this... you guys made some nice mall crawlers. But i like this truck. it's what a working man can buy. Thank you it reminds me of what i always wanted growing up. Thats fun for me to watch 😊
As others have said....in order to get better color matches, you need to up your primer/sealer game. You are putting a hard to cover red metallic over black parts, dark grey parts, light grey primered parts and everything else. Take the time to prime/seal...its not that much after all the work you did...
It depends on the lighting, the old paint looked darker in some scenes too, it was the same with the last build. They have their own paint booth, so they don't have an excuse not to take that little extra time by either matching the original paint or spraying the whole car for that premium finish.
Something I was thinking would be cool, I know you have looked for land, but what would you think of finding an old dealership building, with its service garage on it, and going in to that with VTuned. Then you can have a showroom for your cars, areas to work, and then VTuned would have a bigger and nicer area to work, and you all could help each other at times and be closer. I think that would make for some interesting videos, if you can work together that much. Plus, then you can have your merchandise there, and even though probably do a majority of the builds at you current location, you could maybe find time for meet and greets and then have someone able to go thru and start your cars every day. Plus, if you can find one that had a parts dept, who doesnt, it would give you and VTuned room to put spare parts, or if you part out a salvage car.
Hi guys, I know I havnt commented in a MINUTE!!!! I've been dealing with a few issues that has taken alot longer than planned. Being a veteran in the British army of 14yrs, I've been suffering bad from PTSD. So I decided to binge rematch alot of your builds. This truck is great but if I may.... Ur dad's truck is by far my favourite build. Hope every1 has a class day. Respect and Honour 🙏
I've never really liked Fords but the F250 have always been a favorite for trucks. They look so mean and badass. I hope this becomes a giveaway build. It would look great in my driveway 😂
Crazy!! but we expect nothing less from you guys 😉 So your basicly gonna need a double side step bar to be able to get in after the liftkit, think about it... 👍
I've never in my life seen someone screw a truck up like they can well Simeon anyway all this crap is his idea but I figured it would be huge wheels with rubber band tires!!
Sorry for driving by a few times Monday and honking I feel bad that I honked while yall was filming! It was awesome to drive by and see the shop in real life its way better in person!
You guys are always raising the bar on your builds ! Its no surprise that you opted to raise the roof on this build ! Awesome job guys now you need a ladder to enter the truck lol ! Pops what ya thinking the boys are doing ? Just a few years ago it was how low can you go now its how high ! Guys add the gear to it to haul two dirt bikes and accessorize the poop out of it ! Add some big off road fog lamps or lights Hellas or summits to her turn it into a Baja racer ! Now that would be cool or at least a facsimile of one .Thumbs-up guys you rock
He won't be able to drive it after they get done putting that unless lift kit on it, wait till they try too stop it with those stock Breaks, that's what I like about V-Tuned his Mods are never over the top, everything is done tastefully.
Uh.. What? Normally the builds are 27 episodes and they take months to finish. The Porsche and the Urus took forever. I'm still not sure the Porsche is even finished yet.
Great spec to start with! Power stroke and Tremor. Don’t remove those steps. Non slip, protects rockers, and stick out enough to not get door dings. If you do engine? CCV delete and CP4 disaster kit.
@goonzquad you guys should take a break from the rebuild videos..do some cross Country driving with the cars..etc..take pops mom..take the Urus ,SV, AMG WAGON ..bi daily uploads during the trip
Turning out amazing, great job guys. One thing you definitely need to invest in, a paint can pour spout! Paint isn’t cheap and as much as you spill you need a pour spout.
That is one sexy truck. You guy's did a fantastic job restoring the truck. Seeing what is in store for it next is going to be an epic transformation. Thanks for all the great video's and content.
At the price of paint these days, I was full cringe watching you spill all that paint lol. Maybe I am just a old cheap penny pincher. My 80yo father is so bad he will resharpen utility knife blades. i bought him a 1000 pack and HE STILL DOES IT. But we have been dirt poor in our lives at one point or another. People like us do tend to be tighter and careful about waste.
How to ruin your interior with cheap leather.... It is not original spec as you mentioned 15 times, color is not matching at all, but your car your rush to finish
What a shiny candy apple beauty beast! I hear if you take off the passenger footwell outer side wall panel and you look behind it, there will be a sticker with a number on it. That number is the key code to the truck's door, for if you should ever lose it.
see mine anytime you like only way you can see a good paint job is if you are next to it so come see my jobs anytime you like if you are a painter you must be as bad as that guy no techneak what so ever dont even no how to blend so when you learn something come back and educate me @@jerrywilcox9890
This is a truly magnificient truck! Beautifull inside out! I love the black accents and the tail and headlights and the black windows! And the color. Wow! 😍 Absolute beauty! I would leave it stock height myself but im sure lifted and on 40's will look great as well. Thank you for going with small wheel big tires. Winning combo! ❤❤❤
That truck looks fantastic. I would not chnage a thing! Leave it stock dont raise it that high it will look wierd.You guys killed this project outstanding!
Dude I admire y’all so much, I just found out that I’m having my first child. I’ve rebuilt two wrecks so far nothing major. I do construction at the moment but I’ve always wanted to rebuild wrecks as a side gig. I can’t wait till I get to have my child out there building away with me. Peace! ✌🏼
Hi Mark congratulations on your news and I hope that you get the chance to run your own business at some point in the future. In the meantime good health and happiness for you and your family is everything.
I am extremely impressed at how far your painting skills have come. They have gone from average/diyer (aka, me) to legitimately professional paint jobs. You can see the quality even through the camera. Well done guys!
Cool dudes the paint booth is brilliant 😎 i remember you spent a lot of time away and took longer to finish of the cars the colour is sick dudes can't wait to see those new shocks put on amazing 👍😎😎❤
You guys are awesome. I would like to see some more custom paint though. Invite some custom painters to your channel. Let them show you how to do ghost flames and stuff...more two tone jobs. Maybe I'm old school but I'm tired of vehicles being painted a solid color
I'm enjoying this F-250 build more than the Urus. What a cool truck.
👍
yeah they need to do more old and new cars that people can relate too... and also it would be a great idea if they could help people who have stranded projects to finish them and then surprise them with a rebuilded project this way they get the views and their channel will grow... even with their home rebuild stuff maybe they can help people out with their houses? it would be great
Urus is a gangsta youtuber car, sounds good but is just an Audi. I'd prefer an 70s or 80s truck rebuild above another lambo or McLaren build 🥱😴
0:21
Man that’s one beautiful truck. Secondly I’m happy pops is always working equally or even harder than the boys. Once he retired from truck driving he knew in his heart he wanted to be part of the Goonzquad and we’re all lucky to see him happy working alongside his boyz.
What does a dog have in his mouth at the time 24 or something minutes of the video
Them punks don’t do crao
Cos old man has still some juice, work next few years ❤
why does every ass kisser have to come on here and make comments like this lmao
Absolutely!!! He is a beautiful person
One thing you should do is do a video where you go over every build you have done, what has been your favorites and least favorites, most difficult and easiest etc. I think it would be an amazing video and a video that brings out a lot of memories for many of us
One video wont be enough. a Three part maybe.
I agree 💯💨 that way,they can also have the time to tell us what they’ve done with the R8 build too.
I would suggest a "year in review" every December right before January 1st!
adam lz just did his in 1 video and hes got more cars@@willemp6432
@@willdogsdroid I was thinking that too, but that could be something for the Unleashed Channel.
You guys are on fire with this rebuild. I can’t wait to see the lift kit assembly. That part will be interesting.
Paint booth is the greatest addition ever!!!
They need a paint tester
You mean a something like a thickness gauge?
@@Bob-o-h4k
A sealer coat works wonders for paint color uniformity. Looks like the OEM paint is darker on the rear bumper and tailgate @21:54 is where you really see it stick out. Great job guys, great looking truck stock, absolutely love the color.
Gonna say the same most reds use a lighter gray
I work for FORD. The factory is too busy striking to paint or even build cars properly.
Never really been a fan of Ford, but man, what a beautiful truck. You guys did a great job once again.
😂
And now they will ruin it! 🤣🤣
@@joealex65you think they’ll ruin it their doing what they like. They don’t give a fuck what you think
You never had good taste and like buying pos
@@G3tSpiffy Huge stupid ass wheels and lift kit is stupid as hell
So glad you guys have got to where you can just have Pops around the shop helping out. Pops is allways busy and he's allways great to see and hear in the videos. So great to see success shared with him! 👍😁
It might help to do a test paint on a 6" square before proceeding to the entire parts.
don't let logic get in their way...
And maybe throw some primer on those bare metal spots and remove the parts labels off the bedside before paint looks like they just painted over them.
The color of Primer/Sealer can affect the shade of the base color as well. Even more reason to do test panels
You really need to be using sealer (DTM) on the new parts and the areas that have bare metal showing before spraying the base coat. You’ll find the colors will match better and take less coats as well. I know it’s typical used car lot work and a way to save a few bucks but in the long run the cost of the sealer will be worth it. If your set against sealer, at least spray rattle can primer(DTM preferred) over the bare spots. Base coat (solvent or water) is not a direct to metal product. Check your product technical data sheets for proper application instructions.
You may never see it but whomever ends up with the vehicle will end up with paint flaking off and corrosion problems.
They don't care they are hacks
Sealer is not going to make the color match any better. They dont do spray outs or tinting. They seem to be clueless on variants
Paint deffo won’t flake off and it’s not essential to use a sealer yeah it’s worth it in the long run and I mean Lonnnng run but this truck will see the road probably once a month
@@jeremy_bragg The brands of paint I’ve used and use all recommend a specific shade of sealer for a reason. I’ve noticed it when doing spray outs. The differences between sealed and not sealed can be pretty different. Different shades of sealer can make a difference as well over the same color of base coat.
I know these guys don’t get into doing spray outs and tinting colors. They should try it out. They’d have knew the color on the G wagon was off a few shades from the OEM color if they had done a spray out.
Yeah, it annoys me a lot when they don't use a sealer before spraying the base coat, they used to do it before but they just don't care anymore for some reason.
You guys have to go back to that car wash when it’s done and show em what you turned er into!
I was thinking the same thing. This is a great idea. They did that with the Ford Bronco when it was done, if I remember correctly.
Taking a freshly painted truck to a car wash, to have dirt filled fabric dragged across it, just to get the reaction of said car wash's workers, sounds like an awesome idea! Big brain stuff right there!
@@thesinwagin It will probably be too tall to even enter
Curleysound didn't say anything about washing it there. You jumped to a flawed conclusion.@@thesinwagin
@@thesinwagin I think the idea here was to bring the truck by for the workers to see. Not to drive the truck through the car wash,.
Amazing how much work and accomplished stuff did you guys shrinking into one episode! WWD!
This style of video is amazing I love seeing the big chunks all at once. Even if we gotta wait a little longer it’s well worth it!
I love popes he reminds me of my dad when I started my wrecking yard he was all ways there to help me say hello to pops
I really like the trucks better stock. Love the F-450 because it's so stock. But it does look good.
You guys are amazing I own a wrecking yard in California but every time I follow you guy’s I get amazed by your hard work and clean job
What a great job of that truck you guys have done , the paint job is really nice and the upgraded lights are fantastic, super job guys.👍👍.
I love this build, not a super exotic vehicle, not overly expensive, parts are easier to get, and a down to earth rebuild. Keep up the good work!
Can't wait for the next video you guys are brilliant keep up the good work love from Ireland 🇮🇪.
Finally.. you guys have done right by a lifted truck. Now, that Tremor won't look like a Mall crawler. Smaller wheels and big tires are the way to go.! They look right.
Can’t wait to see the results when you’re finished! Excellent job boys
love seeing pops around the videos! what better to do when you retire than spend more time enjoying life with your kids.
The stock height is beautiful. I’d maybe put on a leveling kit but probs not lift it into the sky
I agree. They'll ruin the driveability and make it a death trap on the road Lol.
Im a big Ford guy and to see this truck get worked on is just amazing!!! ill pray to get one some day!!! Great content.. keep it up!!!
You fellas need to pull those steps and do AMP steps with that big lift. It’ll look cleaner and be more effective.
Nice Truck! Nice Job! The 61 year old me likes the way the truck is now. The 20 year old me would like the lift kit.
Man, I really like your work, every time I watch your videos I learn something, keep working on it and you will always have my support ❤❤👌👌
Really respect the effort, the long hours, you guys put into these cars, and we don't even see all the behind the scenes stuff, the planning, the chasing potential new builds, chasing parts, editing, etc. As you were painting, I was thinking the quality of the paint jobs seems to have greatly improved in recent builds since you moved into your own booth (absolutely no personal expertise in this area), and then you said the same at 4:02 into the video! Really enjoy your content. Thank you.
Y'all are the rebuild MASTERS! Thank you for the great content! Love the truck rebuilds! Keep em coming!
I first found the boys on the f-450. This video had that nostalgic feel. Really enjoyed this one.
Every factory color has a recommended VS (Value Shade) of sealer to use for best color match. Ranging all the way from white, grays & black. Not only will it give you protection against bare metal spots but will help in the amount of coats of paint it takes to cover and your color matching issues as well. Wherever you're getting your paint from should have a color deck of variants for the paint as well to help you narrow down the correct color depending on which manufacturing plant it was built at. Just a few words of advice if you care to fix the paint issues yall are having.
They are not tradesman and actually have no idea how to blend, you dont throw paint over the whole bonnet and say it’s blended, I’m a painter by trade and unfortunately they don’t know how to do it, look they do good, but they always have the same issue when painting, if they want there cars the same colour, they best just paint the whole car, it took me 4 years of training to learn my trade.
Unless I missed something, they went over bare metal in spots and just went straight to color over the e-coat and put no sealer down whatsoever. This truck will be the next giveaway truck, I bet
@@aus-rider put your work on youtube and show us how it's done.
@@leroyraatz5650 So defensive, don't get your panties in a bunch man 🤣🤣
You guys are on fire with this rebuild!!!
ever hear of a funnel or the attachment that goes on a paint can so you dont waste half your product?
They didn't lose half the paint who cares you didn't buy it.
Just a piece of painters tape is all you need
@@1996FordBronco he does it every time. drives me nuts
They don't care they are just wasteful people
No never hear of a funnel can you explain can you explain how I’m supposed to hear a funnel?
Out of all the gifts you'll tried to give me I'll take that truck in it's place,nice build ,I'm not mad .who gets this truck is going to have a nice ride. Alright pop's always wishing you and Momma the best.May God Bless each and every 1of you's Family's. AMEN
Personality I would not lift it or put big tires. I think it looks good how it is
For a short build, you guys knocked it out of the park!!!! God bless
Get an clothing iron and use the steam to get the wrinkles out of the leather, that’s how they do it on the assembly line, just don’t leave it in one spot to long or you’ll burn/ discolor it
Or just get a steamer 🤦🏻♂️
@@gvn-xk6eq the heat from the iron help smooth it out keep it from wrinkling again, unlike a steamer which isn’t going to do anything without heat the underside if the material
if they leave it parked outside as long as the windows aren't ceramic tinted the leather will flatten out over the course of a few weeks from the sun exposure.
@@nickb.249 agreed but not everyone wants to wait that long, like myself just a quick 10 mins process to do, but also if it stays cloudy then that’s longer you have to wait too
@@raynicklaus5720 mate I use to work in Nissan assembling the seats we used hog rings to put the material on and a steamer to get the creases out the company was called Lear Corporation if you’d like to check it out
Thumbnail: Did we ruin it?
Emphatically YES!
I like the longer videos with more progress shown at one time. Great job guys!
I would leave it with the original suspension. All these inventions only end up destroying the vehicle prematurely. And that is an excellent truck.
When i worked for Jaguar Landrover show cars we had to do sprayout cards for every job. Nice library of colours 😂 a bit of WOW lads then colour. Buying in matched paint rarely works. Blend blend blend. Nice job on the rivets.
Why don't you do the v notch for the window mastic like the windshield repair companies do? There has to be a reason for it.
I'm a windshield installer and I keep mentioning this , they also never prep or primer any surfaces before bonding 🤷
Yes V notch is required for proper glass setting . They really don’t know what they are doing and don’t seem to learn from others trying to educate them. They also typically choose products solely on price and try to cheap out on everything except for looks
I love it, now thats a sick daily... good taste so far. extra gas tank and locking bed tool crib drawers with extra leaf reinforcements so it doesnt sag in the rear. maybe a generator and air compressor bolted on. And some nice mounted kc lights and you have the perfect tow, work, play, rescue truck.... you guys needed a truck like this... you guys made some nice mall crawlers. But i like this truck. it's what a working man can buy. Thank you it reminds me of what i always wanted growing up. Thats fun for me to watch 😊
As others have said....in order to get better color matches, you need to up your primer/sealer game. You are putting a hard to cover red metallic over black parts, dark grey parts, light grey primered parts and everything else. Take the time to prime/seal...its not that much after all the work you did...
Enjoying this build...Love this truck.No joke your painting skills are next level.
I think the new paints 0.0001% darker u can't even tell
It depends on the lighting, the old paint looked darker in some scenes too, it was the same with the last build. They have their own paint booth, so they don't have an excuse not to take that little extra time by either matching the original paint or spraying the whole car for that premium finish.
These videos are always epic! I'm not even a Ford guy and I'd rock that f250 any day! Great work guys!!
Awsome video guys,me and my cat love ur content 🎉🐈🐾
Man that paint booth was so worth it. Glad your getting such little to no paint imperfections
Something I was thinking would be cool, I know you have looked for land, but what would you think of finding an old dealership building, with its service garage on it, and going in to that with VTuned. Then you can have a showroom for your cars, areas to work, and then VTuned would have a bigger and nicer area to work, and you all could help each other at times and be closer. I think that would make for some interesting videos, if you can work together that much. Plus, then you can have your merchandise there, and even though probably do a majority of the builds at you current location, you could maybe find time for meet and greets and then have someone able to go thru and start your cars every day. Plus, if you can find one that had a parts dept, who doesnt, it would give you and VTuned room to put spare parts, or if you part out a salvage car.
This is definitely a comment that would come from an idiot. 🤡
Hi guys, I know I havnt commented in a MINUTE!!!! I've been dealing with a few issues that has taken alot longer than planned.
Being a veteran in the British army of 14yrs, I've been suffering bad from PTSD. So I decided to binge rematch alot of your builds. This truck is great but if I may.... Ur dad's truck is by far my favourite build. Hope every1 has a class day. Respect and Honour 🙏
looks good just stock dont mess it up dudes
They don't ever leave them stock
Those 40 inch tires are going to stick out way past the fenders !!
I've never really liked Fords but the F250 have always been a favorite for trucks. They look so mean and badass. I hope this becomes a giveaway build. It would look great in my driveway 😂
Leave it stock or put decent wheel and tire package that can fit under truck stock so you can actually use the truck.
Never happen
Love the tip to vibrate the floor when vacuuming the rug. Going to try that for my seats to. 👍🏻
The tremor gonna be turn into a beast looking truck when it's finish just so wild 🔥🔥🔥
Send love from Indonesian 🇲🇨
#savepalestine #freepalestine
It wild to see all the cars you have… I remember back to the Viper build in your old garage… The Squad has built an empire! Well done 👍
Crazy!! but we expect nothing less from you guys 😉 So your basicly gonna need a double side step bar to be able to get in after the liftkit, think about it... 👍
I've never in my life seen someone screw a truck up like they can well Simeon anyway all this crap is his idea but I figured it would be huge wheels with rubber band tires!!
Sorry for driving by a few times Monday and honking I feel bad that I honked while yall was filming! It was awesome to drive by and see the shop in real life its way better in person!
Leave it stock it looks good the way it is and you guys need to bring back pop's truck with a manual.
You guys are always raising the bar on your builds ! Its no surprise that you opted to raise the roof on this build ! Awesome job guys now you need a ladder to enter the truck lol ! Pops what ya thinking the boys are doing ? Just a few years ago it was how low can you go now its how high ! Guys add the gear to it to haul two dirt bikes and accessorize the poop out of it ! Add some big off road fog lamps or lights Hellas or summits to her turn it into a Baja racer ! Now that would be cool or at least a facsimile of one .Thumbs-up guys you rock
I hope you guys hand these keys to your pops. He deserves it
He won't be able to drive it after they get done putting that unless lift kit on it, wait till they try too stop it with those stock Breaks, that's what I like about V-Tuned his Mods are never over the top, everything is done tastefully.
But the lift will be to much for the father. Maybe.
I was going to say the same thing
@@michaelwynne4346got same size tires on my 2500hd with stock brakes and never had an issue in 10 years even pulling a trailer .
I remember the inflatable paint booth you guys tried several years ago…amazing how much you’ve accomplished!
I would have instantly entered if this truck was a giveaway. But with the lift and tiers I would rather not even have it.
Me either after they screw it up with the lift there ain't no going back!!
Y'all are on crack
Better than oem, best way to put it from the start of your channel, keep up the good work, love this
I think you all should paint the grille to match the body!
You guys are killing it. That was a lot of work in a short time. You just keep amazing us.👍🏼
I love this content tons more than super car stuff. But it’s all good to watch!
These boys almost fully rebuilt this truck in 2 episodes! Tavarish would of done 27 videos about it and not even finish it 😂
Uh.. What? Normally the builds are 27 episodes and they take months to finish. The Porsche and the Urus took forever. I'm still not sure the Porsche is even finished yet.
Great spec to start with! Power stroke and Tremor. Don’t remove those steps. Non slip, protects rockers, and stick out enough to not get door dings. If you do engine? CCV delete and CP4 disaster kit.
@goonzquad you guys should take a break from the rebuild videos..do some cross Country driving with the cars..etc..take pops mom..take the Urus ,SV, AMG WAGON ..bi daily uploads during the trip
Turning out amazing, great job guys. One thing you definitely need to invest in, a paint can pour spout! Paint isn’t cheap and as much as you spill you need a pour spout.
That bigger wide tires will make your truck look stupid and stupid like Whistle Diesel , plus the black out tail light is unsafe
Like most of their wheel and tire choices they pick.....or their sponsors pick for them.
@@stevesnvegas9040 🤢🤢🤢🤮
That is one sexy truck. You guy's did a fantastic job restoring the truck. Seeing what is in store for it next is going to be an epic transformation. Thanks for all the great video's and content.
At the price of paint these days, I was full cringe watching you spill all that paint lol. Maybe I am just a old cheap penny pincher. My 80yo father is so bad he will resharpen utility knife blades. i bought him a 1000 pack and HE STILL DOES IT. But we have been dirt poor in our lives at one point or another. People like us do tend to be tighter and careful about waste.
I freshen up my utility knife blade a few times, your Daddy ain’t mean, he’s smart.
DUDE. THATS SICK DUDE. ALMOST FINISHES DUDE.
How to ruin your interior with cheap leather.... It is not original spec as you mentioned 15 times, color is not matching at all, but your car your rush to finish
What a shiny candy apple beauty beast!
I hear if you take off the passenger footwell outer side wall panel and you look behind it, there will be a sticker with a number on it. That number is the key code to the truck's door, for if you should ever lose it.
It’s 2023… and we still have the CRAPPIEST paint can design… like surely there’s something better out there. 🤣
really the worst painter i have seen it hurts to watch and kidding on it looks good
@@ernieboyle3577better then you.
Who cares let's see yours.
@ernieboyle3577 Dang, I went to your channel hoping to find videos of you showing us how to paint the right way. Unfortunately you had zero.....🫢
see mine anytime you like only way you can see a good paint job is if you are next to it so come see my jobs anytime you like if you are a painter you must be as bad as that guy no techneak what so ever dont even no how to blend so when you learn something come back and educate me @@jerrywilcox9890
This is turning out to be a gorgeous truck.. nothing beats the Color and cab/ bed combination….
The people that say “dOnT LiFt iT, iTS a WoRk TrUCk” probably don’t use their trucks to work anyway so why keep a truck stock that’s no fun😂😂
Exactly dude. Maybe it's cuz 1/2 the people who lift F250's have horrible taste 😂
Toyota Land Cruiser is the work ute🚗🚐🚛🚜
This is a truly magnificient truck!
Beautifull inside out!
I love the black accents and the tail and headlights and the black windows!
And the color.
Wow! 😍
Absolute beauty!
I would leave it stock height myself but im sure lifted and on 40's will look great as well.
Thank you for going with small wheel big tires. Winning combo! ❤❤❤
Elizars painting skills are amazing after years of practice!!!! Nice to have a climate controlled spray booth
I can't wait to see it lifted. Pops Ram 3500 needs some love, too
what a tuck and those lights so cool as cant wait for the next shock wheels keep it up boys your dad must be so proud off you both
Nitos are the best …! 40” …!!!? Massive…! Great work guys
All the way from Philippines, love your works guys ever since.
That truck looks fantastic. I would not chnage a thing! Leave it stock dont raise it that high it will look wierd.You guys killed this project outstanding!
The paint booth makes it so much easier!
Dude I admire y’all so much, I just found out that I’m having my first child. I’ve rebuilt two wrecks so far nothing major. I do construction at the moment but I’ve always wanted to rebuild wrecks as a side gig. I can’t wait till I get to have my child out there building away with me. Peace! ✌🏼
Hi Mark congratulations on your news and I hope that you get the chance to run your own business at some point in the future. In the meantime good health and happiness for you and your family is everything.
Give this truck to pops. He is always working equally hard as You guys :)
I wouldn’t bother with more painting it looks great and it’s salvage title so doesn’t matter
Looks absolutely amazing what a nice red 👍👍🇦🇺
I am extremely impressed at how far your painting skills have come. They have gone from average/diyer (aka, me) to legitimately professional paint jobs. You can see the quality even through the camera. Well done guys!
Grapps are the BEST. can’t beat the sound
Watched the rebuild,and this back to back.Awesome work guys ,it looks Great!
Cool dudes the paint booth is brilliant 😎 i remember you spent a lot of time away and took longer to finish of the cars the colour is sick dudes can't wait to see those new shocks put on amazing 👍😎😎❤
You guys are smart too don't get me wrong you and your dad but elazar he is just all around can do anything all of you guys are smart
Best purchase you guys made, mud grapps are my favorite tires hands down!! Also hope yall like loud tires😅
You guys are awesome. I would like to see some more custom paint though. Invite some custom painters to your channel. Let them show you how to do ghost flames and stuff...more two tone jobs. Maybe I'm old school but I'm tired of vehicles being painted a solid color
Looks awesome, I'm glad to see your dad there every step of the way to keep you boy's straight.
This truck better be going to pops! He would look spectacular in it!