#22 motorized meat grinder - part 1
Вставка
- Опубліковано 7 вер 2024
- This is the initial test run of the unfinished Meat Grinder with only motor and grinder, no safety equpment yet. Please see the additional videos here:
Part 2 - video safety guard and switch- • #22 motorized meat gri...
Part 3 - finished project and grinding meat for the first time - • #22 homemade motorized... .
Below are the links to materials I used so you can construct your own. Hardware (nuts and bolts) are not listed as they can vary and be purchased locally. The pulley guard is a homemade item from scrap parts and is not listed either. Base is also scrap lumber 2"x12" base and 4" x 6" grinder base also from scrap lumber.
- #22 meat grinder - amzn.to/3afaPHV
- Foot pedal on/off switch - amzn.to/2FRHMfD
- 1/2 hp farm duty motor used -amzn.to/2QYvbO1
- Heavy Duty Safety Shut off Toggle Switch - amzn.to/2RlJBH0
- 1 1/2" pulley wheel for motor - amzn.to/2u0HqAx
- Heavy Duty power cord 110v 3 prong - amzn.to/35ZnefI
- Power cord strain relief (adell clamp) - amzn.to/36ZPO1T
- Motor retention Spring - amzn.to/2FSIf0Y
Safety equipment
- Meat Grinder Feed Safety Cover - www.alliedkenc...
- 12" Meat tamper - amzn.to/3710SMf
FREE
Amazon Kindle Unlimited Free Trial - www.amazon.com....
Amazon Prime Free Trial - www.amazon.com/...
I did the same to my dad's manual grinder. It's probably 45 years old. Work great! Thanks for sharing.
That infernal machine you made is so good it breaks all your fingers! No protection no security! You wouldn't pass art!
Would love to rig up something like that with a stationary steam engine. I can see an off grid situation where one could use the wood or coal cook stove to fire a boiler and have various PTO operated gizmos like the grinder, mixer, etc.
i love the foot pedal idea, thanks for sharing.👍
Waw... Inspiration for me... Verry ekonomis.... Tks Mr.. 🙏
Remote-controlled meat grinder, that's cool.
Very good
Very very beautiful
For better performance consider adding couple of pillow bearings otherwise the bush gonna wear-off quickly
Thanks Bobby
Nice! I have an old style grinder like that, I may have to try and convert it other. I really like the foot switch, Great idea!
Antlerbob here is the finished version with accessories, first grind. m.ua-cam.com/video/cqNuRm4y4sc/v-deo.html
I Honor you for your idea, I have been looking forward to buy an industrial one,but this can work for me at less cost
احسنت الصنع انك عبقري👍👍👍👍👍👍👍
Молодец все рассказал за минуту без изливаний души.лайк.
The rpm’s on that auger are high. Was there a calculation done to determine rpm speed? I’d like to see what it actually does once you start dropping meat in it.
Super video
verry nice i like meat grinder
Polea = Protection
Wonder how an electric window unit would work?Run on 12 volt that way."prepper thoughts".
Here is my version of a #22 Porkert, made in Czechoslovakia. Running 150 RPM. This method is easier on the bearings and safer without a large pulley. ua-cam.com/video/asCPLzvwK4Y/v-deo.html Next video I will mount this and add a feed tray and guards.
Nice.I am from Bangladesh needs this.machine
Думаю и себе такую сделать . Взять большой шкив от стиралки , и мотор от неё же ...
Good
Its an excellent job lacking safety measures, it must be with a safeguard to cover the two pulleys to avoid accidents.
What could go wrong with a meat grinder with no guards?
Semoga sehat selalu amin
mincer details about the machine and its cost, along with with transport our place
Este projeto não funciona logo logo começa a a correia "patinar" ou "travar"
Good creatif
What is the size of the fanbelt sir?
good
Ovo je super
most motors, 1/4, 1/3, 1/2 hp they all turn at 1725 rpm !! its a standard speed! that motor isn't cheap either, when its new! Grainger's has a full line. the motor I will bet costs more than the grinder!! and a tray on the grinder would nice, and stomper too!! a guard would wonderful, u don't want to grind up ur hand in it !!
Joe, thanks for the good info. Yes the motor is really expensive but found it on Craigslist for $75. The finished product has a nice guard too so I can keep my digits (and my arm)
Here is the video of the finished grinder Joe. It has a belt guard, Meat tray and stomper, and the foot control. It grinds meat very well. Thanks for your comments! ua-cam.com/video/cqNuRm4y4sc/v-deo.html Victor
Don't buy that junk you can get a Tasen Commerical grinder ,1/2 hp for around $275 USD can grind 400 lbs per hour and that is the small one, it is a good heavy grinder about 100 lbs made in Tiwan the grinder he has is $18 usd
you can also repurpose a motor from an old washer or dryer
Joe, I think you need to add some more exclamation marks! Something is missing in your message, and I think I know what it is!
It turns too fast, the meat will heat up and I think it turns upside down, in principle you have to turn the crank clockwise and when you look at the die (or grid) the knife turns clockwise counterclockwise.
As far as I know, all choppers run like this.
Otherwise good electromechanical assembly.
ต่อตรงแบบนี้ แรงดึงสายพานรั้ง แกนบด จะกินกระบอก สึกง่ายไม่ทน เท่าใส่โครงแท่น ที่เพลา วางลูกปืน UCP
We built not just like that about 9 or 10 years ago. Got red of it due to the fact that it ate a peace of my finger off. It was very dangerous so I let someone else hold it.
Ouch! I am sorry to hear that. This was just the initial run before I put the safety equipment on it. The link to the finished version and grinding meat is in the video description.
@@vicdeldiyprojectsandadvent6123 naw it's alright that was around 9 years ago when we built that thing just don't have 2 many cold beers running that thing.
Why dont you do like my grandparents did? Jack up the rear end of a Model A Ford and run the meat grinder off of the rear wheel.... The could turn a whole cow into hamburger in about 3 hours doing it that way.
لايث
were did you get the big pully
We can grain the tea live in
Vixe ...muita rotação, tem que por redução..
Dimana belinya pak
Is there a model # on the motor. And we're can I find a pulley
Con ese motor hasta se puede moler el animal completo 😁😁😁
hy I like this what is the price this I leve in pakistan
Fantastik
Giá bán bao nhiêu một máy vậy bạn
Hi,,,
Can you i k ow how much motor RPM?
How much diameter of the pully, bid and small one.
Thanks
Buen día cuanto bale
Shouldn’t the grinder be turning clockwise ? .. at first I wasn’t sure other videos showed there’s turning clockwise !
Hello I would like to ask you is this machine suitable for producing rabbit feed?
Dimana bisa pesan mesin nya
What is size pulley???
Just what I need for the stiffs that don't pay back their debts ! Hand in first !
It will gladly take it too! ;)
Diameter pully?
You may need to reduce the speed its a little too fast....
most definitely! It should be operating at about 80 rpm but is operating currently at more like 300-400 minimum. This machine is going to bog down or at the very least squeal like crazy when putting any real meat in there. 400lbs per hour....HAHAHA...no way! Add some gear reduction pulleys and you may be able to get above 5lbs per minute or so I'm guessing.
Nope worked great
That grinder is spinning too fast. You need to slow it down.
Dinamo,s number??
What RPM is the motor and what size is the pulley on the motor? I'd like to do the same set up with one that i just ordered.
1725 rpm 1.5" pulley
Go to Blocklayer.com and you can pull up a pulley calculator. I too am running a 1725 RPM 1/4HP and I had a 1.5 on the pulley maybe going to a 4.5 pulley on the grinder and it was giving me about 500 rpm per calculation. Way too fast!!!! It was making it rain ground beef!!!! I'm able to look at some pulleys now and key in the diameter and known values for a new RPM. I'd like to get it down to 100 or 150 rpm. The machine is going to out run the person and you don't want someone moving fast around these and make a mistake. Have some fingers in you're ground beef.
Cara mesen y gmna
I want this machine
PLEASE , .WHAT SIZE OF MEAT GRINDER YOU ARE USING?...
#22 is the size I had and used. There is also a #32 meat grinder you can use which is larger.
Ama bu çok tehllikeli topu ağza yakın korumalık yok
where did you get the foot switch? thx
You can purchase at harbor freight, northern tool or amazon
Berapa harga mesin pelet?
berapa hatganya
i just used my kitchen aid mixer food grinder attachment, with an after market blade and plate, used some food spray on the meat, it ate it right up!! 12 # was history in a few minutes!
it works like a charm!!! but don't use the kitchen aid knife , its worthless!!
Bjr d'en.moi tiliphoun😊
We're can I get that motor at and what size is it ?
William, Thank you for watching the video. This motor is a 1/2 hp farm duty motor. I purchased it used from Craigslist cheap, but they sell on Grainger for about $150. I would recommend using any used 1/2 hp or up motor you can locate. I have even seen old washing machine motors used.
Que perigo de um possível acidente acho que seria mais barato comprar uma máquina de moer profissional
ua-cam.com/video/cqNuRm4y4sc/v-deo.html no hay peligro.
Have you sone pic you can send me og how This item is made
Обороты уж очень большие.
You have putting gearbox for better machine
very dangerous, be careful.
Isso é um perigo para criança se machucar e vai quebrar direto. Vai se machucar aí em
What would it cost to build ? Or would you sell this one
Uapik mens pirak reganek sue
❤🎉😂🎉❤
pengen bikin tapi ga ngerti bahasa nya
المثرامة تفتر بالعكس
👍🇩🇿
مگه میخوای سنگ چرخ کنی.
There is no emergency shutdown button
There is an emergency cutoff switch directly on motor on finished version. This is the first run.
Also has a foot pedal. These things will take off fingers. I made one last weekend with a #32.
@@nbreeze5339 you are right! There is a lot of grinding power there. In addition to the foot pedal, the finished version has an emergency cutoff switch directly on the motor, as well as a funnel extension and meat tray to help keep the fingers out of there.
@@vicdeldiyprojectsandadvent6123 And its nice. Don't get me wrong. Not criticizing. I made one recently and did not have a large pulley. I found a website called bricklayer. It had a calculator to determine RPM with the pulleys diameter and motor RPM. I was just under 700!!! Talk about taking you'r fingers off. It also gets bogged and clogged at those speeds because of more speed vs torque. I ordered a nice deadman style foot pedal for less then $20. No wiring needed. Its a simple 110 plug. I want it to stop as soon as I step away. I could not live with my self if a kid or Mr.Snuggle's the dog put his snout in it while it was running and I stepped away. I also hear that keeping the meat nearly frozen helps from making meat paste. I made some pork paste at 695 RPM's!!!
Easy to loose all fingers
Trust me you can i built one like it. Now someone else has it for just that reason. I was lucky and only got the tip of my finger but the auger ripped the tip off. That shit hurt unlike anything iv ever had.
@@greenboyatgafarms2250 I'm a chef bro I seen so many people people loosing finger that's need some protect fence on top
@@mustafaalkan3455 I'm a farmer and mechanic by trade so iv seen my fair share also but ripping a finger tip off ant like cutting it off it took me about a year to completely heal up. And yes it needs a cage built to go around it. We use a regular electric grinder now day processing are deer hogs cows etc.
Brapa haraganya
Одно из самых опасных самодельных устоойств по т/б на ютубе.
This was only the first test. Here is the finished version. ua-cam.com/video/cqNuRm4y4sc/v-deo.html.
gk pake gear bok
bos berapa harga ya...
Berapa harga nx
ora didol
Fiyatınıöğrenmekistiyorum
👌👌👌👍👍⚘⚘⚘🌷🌷🌷
400 pounds an hour come on now ???
PUT A COWLING OVER THAT WHEEL!!! YOU ARE ASKING FOR A TERRIBLE ACCIDENT. VERY DANGEROUS.
muy rápido no sirve.
Roberto, Gracias por ver el video. La velocidad esta bien. Aqui esta el video con la maquina terminada con equipo de seguridad y moliendo carne. ua-cam.com/video/cqNuRm4y4sc/v-deo.html Victor
Jajaaja idont think is industrial... No bearings...
JaajaaJa...yes, it has bearings. :)
A piece of junk paint and shavings in your meat buy a Tasen Commerical grinder 1/2 hp $200
Junk Don't waist your money, buy a Tasen 1/2 hp commerical grinder $200 can grind 400 lbs per hour
Price this
Total price will vary for each person, If you have a motor and the meat grinder already, that is the majority of the expense. If you are a good bargain shopper it may be worth building. It is a very powerful grinder, and I built it because the grinder has sentimental value to me. The grinder sells for about $65, the 3/4 hp farm duty motor costs about $200, but I found used for $75. Nuts, bolts, hardware, belt, foot control about $90. The wood and and protective belt cover was material I already had. I also spent an additional 75 to $100 on additional Accessories, funnel and meat pan, stomper pans etc. It is probably cheaper or at least same price to buy a home quality grinder, but if you take pride in building quality things yourself, it is a great project that will last for many years of fun and satisfaction.
Vic Del will you sale that my friend please let me no
Українська
You paid more for the motor than you could have bought a real Electric Grinder. Plus, must be a bitch to clean. Good Ideals that cost too much and really aren't that good aren't really Good Ideals
This d’engrais
Looks unsafe
Un protected moving part!
Please watch part 2 & part 3 that is suggested at the end of the video and linked in the description. Thank you for your interest and your comment. :)
too fast and too dangerous
34n
This is unsave font use at home.p
ua-cam.com/video/cqNuRm4y4sc/v-deo.html It is safe.
No safety
Evergreen, Thank you for the comment. This is the first video of the meat grinder, still under construction. Here is the link to the completed Meat grinder with safety equipment. Belt guard, foot control and Funnel and meat tray. ua-cam.com/video/cqNuRm4y4sc/v-deo.html Victor