Bars&Tone, I went to buy it right when it came out, I could see it was going to need a lot of upgrades to drive like I do🤣 so I passed. But no disputing it’s a fun rc. GREAT JOB MY FRIEND!!!!!👍🏆🍻💯
Yeah that has been the only problem, it does need many upgrades every time I start trying to just rip it how I want to I have discovered a weak spot lol but it is a lot of fun
That is quite the tear-down and process jus to get the spools in eh?! -aha! I see you use the same ubiquitous ammo cans i use for EVERYTHING hahaha. They work great! Even for ammo lol!
Yeah it’s a bit of a pain in the ass to be honest with you to terret down, if the car wasn’t fun I would’ve gotten rid of it by now but it’s worth it. But yes the ammo cans are awesome I have plenty of them filled here in the house with other things! Lol
@@BarstoneRC Haha! Yea, i definitely hear ya on the 'difficult to work on' models. And you're right, they redeem themselves when it comes to 'fun & driveability!' And perhaps even moreso i hear ya on the other full ammo cans!!! Sounds like we have other relatable hobbies thus enjoyed haha!! THAT'S WHAT'S ⬆️💣💥👉💨😉😂😬
of all the damage I've done to my ryft, i still have the issue of stripping gears. even after trying a "crawler" motor i still rounded a bunch of new gears stuffed with 20 million weight (diff) fluid; so i just stayed with spools all around and will be returning to stock electronics i did lock all of my diffs' with the stock electronics, but that destroyed my beadlock! sooo now i want to find hex adapters and put LMT tires on it.....
Thanks, I hit them with the hose spray them down with purple power cleaner let them soak for about 10 minutes and then spray them off and then hit anything metal with WD-40 or some sort of oil.
If we lock the diffs, does it compromise/reduce the speed that you get w/out diffs been locked? Also, do we actually have to lock three diffs? i.e the front, the rear and the center? Is the center is required too? I thought only front and rear is required. Is it going to make any difference? Pls advise. Thanks.
I tried just the rear first was not happy with it I then locked the center and it was pretty good I decided to lock the front mainly because I wanted all four wheels turning at the same time it’s obviously not a speed car or meant to go fast so that’s why I wasn’t concerned if it even did cut down on that at all. But you could try just the center in the rear first and see how you like it
@@BarstoneRC Hello i buyed An Axial ryft second hands i want to make IT a crawler ,so i locked the front,center,Rear but what about the spur en pinion Gear do i have to chance IT ? If so wat spur en pinion nr and ofcourse An other motor en esc sorry for my english because i am dutch belgium greetings Christian
Ssd chromeolly don't think I spelt that right but I keep bending my axle shafts in my ar60 axles because I use them In alot of stuff in my unlocked custom monster truck on to homemade stuff similar to the ryft and more but get some of those ssd axles shafts and you will never bend another axles shaft!if I got it setup with speed or alot of power were need to be able to control not crawl it you want them u locked and the ar60s are basically the only axles that I know of that can be unlocked if anyone knows other unlockable axles please let me know!!!they also make a tube that slides over the axles shaft that will strengthen it!
To be honest, the traction in the way, this thing hooked up without them was garbage. I thought there was something wrong with mine and I went over everything tooth and nail.
@@BarstoneRC im also having one installed with 2speed converysion.. id love to get these as well. Btw did you run at high speeds after this upgrade? Is it hard to steer with the front locker at high speeds? If it is not..i want to order them..
Excellent. Perfect upgrade. Thanks for sharing.
I'm glad you enjoyed it!
Awesome ...! Can't wait to see how this works out . Gonna get those ordered for mine if it's better . Thanks for doing that . 🤟
I’ll update on the run video how it’s going
Very cool. Let's see it in action!
Bars&Tone, I went to buy it right when it came out, I could see it was going to need a lot of upgrades to drive like I do🤣 so I passed. But no disputing it’s a fun rc. GREAT JOB MY FRIEND!!!!!👍🏆🍻💯
Yeah that has been the only problem, it does need many upgrades every time I start trying to just rip it how I want to I have discovered a weak spot lol but it is a lot of fun
That is quite the tear-down and process jus to get the spools in eh?!
-aha! I see you use the same ubiquitous ammo cans i use for EVERYTHING hahaha. They work great! Even for ammo lol!
Yeah it’s a bit of a pain in the ass to be honest with you to terret down, if the car wasn’t fun I would’ve gotten rid of it by now but it’s worth it. But yes the ammo cans are awesome I have plenty of them filled here in the house with other things! Lol
@@BarstoneRC Haha! Yea, i definitely hear ya on the 'difficult to work on' models. And you're right, they redeem themselves when it comes to 'fun & driveability!' And perhaps even moreso i hear ya on the other full ammo cans!!! Sounds like we have other relatable hobbies thus enjoyed haha!! THAT'S WHAT'S ⬆️💣💥👉💨😉😂😬
of all the damage I've done to my ryft, i still have the issue of stripping gears.
even after trying a "crawler" motor i still rounded a bunch of new gears stuffed with 20 million weight (diff) fluid; so i just stayed with spools all around and will be returning to stock electronics
i did lock all of my diffs' with the stock electronics, but that destroyed my beadlock! sooo now i want to find hex adapters and put LMT tires on it.....
Yeah the lockers was the only way I kept it together for long.
every time your cars looks like new out of the box :) you clean them amazing...! :D
Thanks, I hit them with the hose spray them down with purple power cleaner let them soak for about 10 minutes and then spray them off and then hit anything metal with WD-40 or some sort of oil.
If we lock the diffs, does it compromise/reduce the speed that you get w/out diffs been locked? Also, do we actually have to lock three diffs? i.e the front, the rear and the center? Is the center is required too? I thought only front and rear is required. Is it going to make any difference? Pls advise. Thanks.
I tried just the rear first was not happy with it I then locked the center and it was pretty good I decided to lock the front mainly because I wanted all four wheels turning at the same time it’s obviously not a speed car or meant to go fast so that’s why I wasn’t concerned if it even did cut down on that at all. But you could try just the center in the rear first and see how you like it
Great video.awesome thing to know now if I ever decide to do that thank you.🦾🔥🤜
thx you but why you dont locked up on the back?
Everything is locked front back and center
Why are your front tires on backwards?
Didn’t notice and on a car like this it don’t matter lol
Do you mind giving me the link for the lockers I can’t find them anywhere.
Thanks
www.ebay.com/itm/294363573532?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=tSUG2y2mTn-&sssrc=2349624&ssuid=YD4BnIwZRGa&var=&widget_ver=artemis&media=COPY
Is just in the rear and the transmission?
I locked all 3 front, center and rear
@@BarstoneRC Hello i buyed An Axial ryft second hands i want to make IT a crawler ,so i locked the front,center,Rear but what about the spur en pinion Gear do i have to chance IT ? If so wat spur en pinion nr and ofcourse An other motor en esc sorry for my english because i am dutch belgium greetings Christian
I still have all stock electronics in gearing in mine
I do it same but now don’t run straight and always it’s flipped out
Ssd chromeolly don't think I spelt that right but I keep bending my axle shafts in my ar60 axles because I use them In alot of stuff in my unlocked custom monster truck on to homemade stuff similar to the ryft and more but get some of those ssd axles shafts and you will never bend another axles shaft!if I got it setup with speed or alot of power were need to be able to control not crawl it you want them u locked and the ar60s are basically the only axles that I know of that can be unlocked if anyone knows other unlockable axles please let me know!!!they also make a tube that slides over the axles shaft that will strengthen it!
Shes ready for a proper course now
This was very helpful indeed
I may be over worried, but that much power and wheel speed on those ar60 axles in locked form, may come back to haunt you.
Yeah it’s very possible I may have created a weak spot somewhere else but I’m going to give it a try! Lol
Another good video
Can I just do the front and rear and Skip the center
I would do the center the most. Then the rear.
Can't wait to see it rip now!
Tight!! :-)
It's cool ~~^^
After seeing that, now I really hate that rc.... lol.
Lol
Do you really think this is necessary? Except for the crawling they will reduce the Ryfts turning capabilities at high speeds...
To be honest, the traction in the way, this thing hooked up without them was garbage. I thought there was something wrong with mine and I went over everything tooth and nail.
@@BarstoneRC im also having one installed with 2speed converysion.. id love to get these as well. Btw did you run at high speeds after this upgrade? Is it hard to steer with the front locker at high speeds? If it is not..i want to order them..
@knightmpw these do not handle well at high speed at all. They roll easy
@@BarstoneRC any Idea of sharing some videos in YT?
@knightmpw I sold mine so I can’t make any more unfortunately
Why you locked it in the front? This is nonsense.
They slip entirely too much in the car pulls in one direction and I’ve never locked one up completely so it’s an experiment.
@@BarstoneRC how does it work? can you turn well? Thanks!!
It still turns great and gets great traction for the type of car it is it works great.
@@BarstoneRC thank!!