How to Build an Unbreakable Cinewhoop - Foxeer Foxwhoop
Вставка
- Опубліковано 20 жов 2024
- Foxeer Foxwhoop BnF HDZero
www.getfpv.com...
Foxeer Foxwhoop 2.5 Frame
www.getfpv.com...
SpeedyBee 1404 Motor
www.getfpv.com...
JHEMCU GH405 AIO
usa.banggood.c...
Caddx Nebula Pro Vista
www.getfpv.com...
HappyModel ELRS EP2
www.getfpv.com...
RadioMaster TX16S Multi-Protocols
www.getfpv.com...
![☀ Попытался сломать - не получилось. Синевуп - ТАНК [Foxeer Foxwhoop 25]](http://i.ytimg.com/vi/SaI2cUCTZ10/mqdefault.jpg)
![☀ Попытался сломать - не получилось. Синевуп - ТАНК [Foxeer Foxwhoop 25]](/img/tr.png)
Nice video. Probably I will be building one too!
Nice video. I'm your 850 subscriber.
Very nice i run the 1200 mah speedy pizza batts in mine love my foxeer 25
Hi, Gboni, thanx for sharing your build this will give me more confidencebuilding mine,itll be my first,no camera yet or goggless still waitting to see what dji and walksnail are doing sofar dji are looking goodnnow there backwards compatible!.cheers from sth australia outback,God bless.
hate typing on the tv its long and hard and the control is stuffed , peace :)
awesome vid bro
can you mount stack FC+esc instead of all in one?
my friend speedybee 1404 4500kv engine I have the same engine as you. My flight time with 4s 650 mah tattu is 2 minutes what could be the problem
Hi. After how did you manage to reduce the vibration? mine also mounted with o3 made in tpu camera support, improved 50% but still vibrates and gives a jelly effect. how did you set the PID?
Sorry for the answer. I just saw your msg. I am not running a 03 on my foxwoop . Either way, running your esc at 48k usually helps with jello with the 03. These are my seput betaflight 4.3.2
Damping D gain 1.3
Tracking P&I 1
Stick response F 0.7
Dynamics damping 0
Drift wobble I gain 0.8
Pitch Damping Pitch roll D 0.75
Pitch Tracking roll P,I, F 0.8
Master M 1.05
Filter settings are default
This tune may seem a little aggressive, but that works for my setup. If you are using a different setup, then proceed with caution
@@GBoniFPV i Will test This setup. Thanks
@@GBoniFPV I used your configuration, it improved a little. I will keep. thank you very much
i built a foxwhoop with similar parts but i get a lot of vibrations did you have this issue?
Any other motors i can use for this frame (uk)
Any motors as long it has 9×9 mount
9x9 mounting and 3500kv above.
Hi Gboni, Thanks for the video.
Can you help with something? I want to connect tbs nano rx se (crossfire) and vista at the same time. but the fc diagram shows that both are connected from the same place. What wiring diagram would you suggest for crossfire and vista kit.
First, you need to make sure that your Sbus wire (from the Vista) and the nano rx are connected to different UART. For example, SBus is connected to UART 1, and the Nano rx is on UART 2. Second, you can only run one RX protocol at the time. Betaflight will not let you set up and run two different Rx protocols at the same time. Finally, in order to swat protocol, you will have to go into Betaflight and make the change by swapping to rx from UART 1 to UART 2 based on the protocol you want to use. So it can be a little annoying. I will advise you to choose one protocol and run with it. What TX are you using ?
@@GBoniFPV I haven't made the connections yet. First of all, I want to make sure I'm doing it right. My FC is foxeer reaper f745 aio v3. In the diagram, sbus is connected to rx1, tx2 is showing as vista and nano rx connection for rx2. this link to the same place confuses me. whereas idle has rx3 tx3, rx4 tx4, rx7 tx7. If I connect vista or nano rx to one of these, will I have any problems? maybe it's very simple but I don't want to go wrong, I've heard that these fc's are sensitive to soldering.
Hi I put the these parts in a grinderino Frame and what would be a good tune or preset in betaflight I'm using 1804 3100kv motors?
Iam using one of the 3inch preset from BTF. i have to admit it is not perfect but still good. I can exactly remember what preset i end up using.
@@GBoniFPV
Hi, what preset are you using?
Are you satisfied with the JHEMCU GH405 AIO
50/50. The one on my 3.5 cinewhoop when 🔥, but this one is holding very good. Maybe the 6S setup was too much fir it.
@@GBoniFPV I understand. What is your flight weight and flight duration?