Це відео не доступне.
Перепрошуємо.
Best Snow foam lance for your Karcher K2, K4, & K7
Вставка
- Опубліковано 14 сер 2024
- Want to know how to wash a car properly with a pressure washer, how to get great snow foam, if the MJJC pro snow canon is any good, and how will it work with my pressure washer, then this is the video for you.
I will show you the difference in snow foam between a karcher k2, a karcher K4, and a Karcher K7 pressure washers, all washing a car with Autoglym Pola collection, thats Autoglym pola blast, Autoglym Pola wash, and autoglym pola seal, using my favourite snow canon the MJJC foam canon pro
Links to products mentioned
Mjjc foam canon direct bit.ly/3fZ1t80
Mjjc foam canon Amazon amzn.to/3wdWeXX
Mjjc foam cannon USA Link amzn.to/3DqHQyg
Karcher K7 Full control amzn.to/2Si5FGL
Karcher K7 compact amzn.to/34WV47a
Karcher K4 Power control amzn.to/3ipBGHy
Karcher K4 compact amzn.to/2T4Y2Uf
Karcher K2 Power control amzn.to/2S7Mj7r
Karcher K2 compact amzn.to/3psMOoR
Straight through hose connector amzn.to/3v59xbr
Autoglym Polar Blast (snow foam) amzn.to/3wdKHaI
Autoglym Polar Wash (wash) amzn.to/35ap8fH
Autogym Polar Seal (protector) amzn.to/2TDnDnt
Autoglym Polar Kit (all 3) amzn.to/3fZ4sgI
Car wash mits amzn.to/2RwuTRz
Microfibre dry towels amzn.to/3fWkUyi
Meguiar's Bucket amzn.to/34XQg1i
Chapters
------------------------------------------------
00:00 set-up
02:12 Step 1 Polar Blast
04:41 Karcher K2 Snow Foam
05:52 Karcher K4 Snow Foam
06:46 Karcher K7 Snow Foam
08:25 Step 2 Polar Wash
11:03 Step 3 Polar Seal
13:01 Finish & close up
------------------------------------------------
=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
If i have helped you and you would like to buy me a beer
paypal.me/Rich...
=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
Awesome if you could show support to my Chanel by watching and SUBSCRIBING to my channel if you haven't already done so.
Monetizing my videos allows me to invest in equipment make more videos
Many thanks for your support, regard Rich Man
Above links affiliate links
#mjjcfoamlance, #foamcannon, #carcleaning, #cardetaling, #autoglym, #snowfoam, #polarwash, #polarblast, #karcher,
Holy smoked, that gun is a marvelous tool! seeing it works so flawless on that simpel K2 model. very impressive!
I was surprised as well, you expect better snow foam on more powerful pressure washers, but the smaller nozzle for lower power machine made the k2 perform like a more powerful machine
Somebody get this guy some more subscribers. Really great video just subscribed. I need to clean my van I think you might have just given me then motivation to do that. My new k5 just arrived today, just need all the other bits haha
Thank you for your comment, every subscriber dose help, thank you
Lovely job and great video again. Is there anything more satisfying than watching a car being cleaned properly? PS. Love the car too, gorgeous.
thank you for the comment, it is surprisingly how quick and easy it is to clean with this 3 step method, and the wash mit's compared to the old days with a bucket and sponge and waxing with a paste wax
After adding the wax sealer you then rub with a towel. On the instructions it says to hose off first then dry . Why?
Also you say leave the snow foam on for 3 minutes yet Autoglem Reccomended leaving it for 10 mins. Otherwise I like the video and look forward to seeing more. I like the foam cannon and will be buying one I have 2 , both under £20 and they are rubbish . One leaked after 6 months the other is new and won’t foam up properly so is going back cheers
You are correct with the instructions which is always best to follow
but Before I read the instructions I saw someone saying wipe off and save time and water, as water will just be repelled, so that’s how I started using the product myself and used on countless cars
also not everyone will be using microfibre towels
I’ve tried both ways with little to no difference I think the recommendation is so that the sealer dose not dry in globs and washing off first would stop that, again with the snow foam I personally find it’s more to stop drying on the car, if it’s hot then wash off sooner before it dries if it’s colder and in shade or under cover then it can be left longer.
Would have been interested in seeing this using the Autoglym foam cannon.
Autoglym foam cannon is good, but having both the Autoglym and mjjc cannons, I just prefer the mjjc foam cannons, the Autoglym is my next favourite so far
Very nice video! Man that big versions looks so great! TO bad it costs so much here. I just bought a K2 Compact + Car kit and it was already almost double vs other countries. Plus i need to either get 220v at home or buy a big transformer/step up to big max watt
I would be happy washing a car with the k2 and the mjjc pro canon, just having the others spoils me
How come you didn't diluted the detergent in foam cannon with water?
It looked to be only 25% filled with detergent? ?
Thank you for your comment, I mentioned in the video at 2:13 about dilution of the product, as for the canon only being 25% filled, it depends on the car you are washing, I had enough product in to wash that Volvo v90 which is a large car, a smaller car you would use even less, a van maybe more, With the Mjjc canon having a weighted suction tube it can suck products right from the bottom of the cannon, no point in wasting product, also with correct dilution and using the correct amount, the autoglym products do go along way
@@RichManPoorTech 👍
Hello, thank you for guiding me about this Kanon foam. Does this Kanon foam work well with these two nozzles, 1.1 and 1.25, with any 180 bar pressure device, and there is no problem, or do we have to buy the 1.35 nozzle separately?
the 2 x nozzles come with the canon, smaller helps with lower pressure machines larger works fine with the k5-k7, you can always lower the pressure of the machine, as its not necessary for full pressure to was the car. but i use it at full pressure, just clean out the gun when finnished
Thanks for the vdo as been watching all these pro detailers do it and good to see an amateur having a go for a chg.
Have a K2 Karcher with the Karcher FJ nozzle but looks as tho those Canon MJJC pro seems to be the best!!
Liked n subbed!!
Thanks for the comment, the autoglym and Mjjc pro canons ate a massive step up from Karchers own cannon, I keep meaning to show a comparison but keep washing ng my car with Mjjc as I prefer it, not even sure where I have put my Karcher one
Can you comment or describe how you clean up the drive afterwards? Some reviews suggest that the snow foam can stick around for days... I heard that fabric softener helps dissolve it? (I would probably only use the first stage for interim washes, my wife has more faith in the car valets at the local supermarket for a proper cleaning, sigh...)
I ask because I don't have a drive and would be doing this on the road/pavement outside my house. As I'm near a school I don't want to create a skid patch/injury lawyer paradise!!
If you use a thiner foam, changing gun flow, (as shown with the K4 on the side) this helps it disappear quicker, also if you jet wash over the foam the added water will also help it disappear
@@RichManPoorTech Thanks, new gun arrives this week so I'll soon find out!
Great vid and lovely car!
Thank you for your comment
I have the k2 and the mjjc Canon and the snow foam I get is like shaving foam it’s incredible it’s 100 times better than the Kercher Snow foam lance
i was blown away by the thickness on the k2 with the MJJC i expected it more with the K7, it still surprises me how people don't do a contact wash then blame the pressure washer
@@RichManPoorTech agreed just spraying on pre-wash then shampoo and expecting it to work perfectly, crazy
Nice video and delivery. I think a true comparison of the 3 karcher units would to re-formulate the snow foam mix to have a fixed PIR, using the same concentration across the 3 machines with increasing levels of water flow (litres/min) will pull more mix for the snow canon and use more product and hence thicker foam? Interesting to see all the same as I have a 15 year old Karcher and looking to upgrade. Which unit is ‘adequate’ for the job?
Hi mix was the same for all 3 keeping that variable the same, with more flow you can move quicker, especially when rinsing without the Lance, but with a low, mid, or higher end domestic washer, the quick wash and protect end result is the same
Enjoyed that! That's a very good finish for a relatively quick job. I can see the car is quite new but has it been machine polished? The gloss is great!
Thank you for the comment, It was the 1st time i had washed the Volvo, it had done 1500 miles from new, The astra you can see in the back ground has done over 170,000 miles, that was bought for my motors channel, that had been washed the week before, but i had Machine polished the astra earlier this year
@@RichManPoorTech While I am not yet using a foam cannon, I do use a 180mph blower to pull the water off so having to dry very little. The less contact, the better. I just use a regular garden variety blower without the long nozzle. Works very well. Thanks for the video, I will order one today. Probably the middle one
@@aragureghian724 thanks for the comment, those wash mits work wonders as well with the contact wash,
I’m having a new product sent out to me that isn’t available yet, I am waiting for the launch so keep watching for that video
Great video, but seems difficult to avoid the front windscreen with that finisher.
I’ve gave up trying, doesn’t seam to matter much
Is the Karcher K2.360 compatible with the Autoglym and MJJC foam lance? There are so many different Karcher models with different connectors! 😕
Hi. I just changed K2 for K4 and bought exactly same foam gun. Did you ever tried differences from the bucket? I haven’t choice and using bucket water. K2 was better when I keep water source higher, over the floor but still needed building pressure. Hopefully k4 will be better. Tom
I haven’t use my k series with a bucket, but I used my hd series with a water container, the higher you can have the water feed the better
Hi, assume you’re using the highest pressure for the foam applications.. but what pressure do you use to rinse the car? I have a K5 but don’t want to risk damage to my paintwork.
Personally as i use to use pressure washers that were a pain to change the pressure as they didn't have adjustable lances like this, I still use full pressure but i stand with enough space from tip of the nozzle to the car, this gives a wide fan, which speeds up cleaning, but also dissipates the pressure of the spray compared to being close up, the further away you are the less pressure is applied to what you are cleaning,
Makes sense, many thanks 👍
nice video just the info I wanted but you need to seriously reduce the fan width because you on the MJJC because you are wasting A LOT of product.
thanks for the comment
I would be grateful if anyone could help me with this matter
Love to see the micro marring and swirls after no snow foam in the world will remove all
Dirt so you have Basically just gone round and created a detailers nightmare nice job 👍
Thank you for your comment
Excellent video sir - very informative and useful as I am unhappy with the stock Karcher snow lance
I love using the mjjc snow foam gun, I’m testing a new snow foam from mjjc and will be posting it soon
Can you tell me, on K7 what setting did you use. Cant get tick foam and its using solution pretty fast. On 1 I got best result but still not tick. One thing I figured out, when using without gun, it goes to foam mode and it starts pulling air trough shampoo inlet on pressure washer so I also tried tapping nozzle so it doesn't take air trough it as it is taking it trough snow lance.
On all the pressure washers I am using full power pressure model mode, not detergent mode, the suction you feel on the tube in detergent mode is supposed to be there to suck detergent in if your not using a foam cannon, I don’t recommend that as it takes ages to get clean water for rinsing again,
I don’t know if your using a mjjc foam cannon but make sure that there is no soap blockage from previous uses and not being cleaned through, try adjusting flow on the cannon and nozzle width to see if that helps check that any air inlet to the cannon bottle isn’t blocked, check that the foam is diluted to correct ratio as well
@Rich Man Poor Tech mjjc, it switches after few seconds to normal mode (preasure, not mix for soap) but if I go on full power, the flow is to strong it simply rinses everything of car, on 1 is max. I used koch chemie GSF and did like 60ml to 1l. They say 20 to 1l but that is to little. I watched so many wideos of mjjc and GSF, foam was like shaving cream, cant get anything like that and If I put more detergent, that doesn't make sense.
Great video! The only thing I’d probably do instead is when finishing each panel with the contact wash, I’d probably rinse off the mitt to make sure I’m not trailing dirt around. Also, would you recommend using the polar seal if I have a ceramic coating or would that be defeating the purpose or a ceramic coating
As I’ve not used a ceramic coating myself I don’t have the experience to give you a definitive answer, the polar seal is a good sealer protector but my understanding of a ceramic coating is that it’s a hard smooth shell that stops dirt from adhering to,
I would imagine that the polar seal would just wash off but I’m sure that a channel like forensic detailing may be able to help you further sorry wish I could help you more
@@RichManPoorTech don’t worry thank you for your reply! Just my car is going in to be professionally detailed, fully machine polished, wet sanded etc… in what essentially will make it look brand new and be as close to perfect as possible. Also getting a ceramic coating so may be worth asking the guys doing it when I drop it in. Cheers!
I've been using the karcher snowfoam gun for a while and I'm a bit disappointed with it , especially after seeing your results. Time for a swap
My recommendation is to go for either the Mjjc that I used or the autoglym, both are good but in my opinion the Mjjc just pips top spot
Did you rinse off the polar seal
Interesting video, thanks. You mention that the MJJC foam nozzle is better than the Karcher, do you have a video for the Karcher or a comparison?
i don't have a video on the karcher nozze yet, but i do own a Karcher FJC connect nozzle, i can do one in a bit but it is not as good as the MJJC Pro. the Autoglym snow cannon is is the middle more towards the MJJC
Thanks for the comparison
Your welcome
Nice video! But please always start from top to bottom when you rinse haha
thanks for the tip, but i was once told by a porsche vallet to rinse bottom up don't know why
It is best to start from the bottom cause it’s the dirtiest part of the car and the snow foam on top can actually still drip down and continue to break down the dirt and grime from the bottom, also you can see much better where you’ve cleaned and not cleaned. So yeah always go from the bottom up.
@@lebossjohn7775 oh ok never thought about that! Learn something new everyday 😅
What size orifice did you have inside the MJJC for the K2??
the smallest of the 2 that came with the gun
Hi, did you use the 1.1 orifice with all the power washers or just with the k2? Thanks.
I used the the smaller with K2 and then switched to the larger for the K4 and K7
@@RichManPoorTech thanks.
What’s the setting on the K7?
Do all the K series share connectivity? Got an ancient (but effective) K2.38 and this looks like just the ticket if it's compatible.
Not sure if very old have, but if it’s got 2 tabs and you push the Lance in and twist then they are the same
@@RichManPoorTech I'll take it apart tomorrow, thanks for taking the time to reply :)
@@RichManPoorTech they are not the same as the older K series has a longer fitting, you need to shave down some of the plastic on the side of the fitting on the newer K series attachments to get them to fit.
@@LarkspeedNL that is great to know thanks for sharing your comment
If I already have a Karcher K7. Do I need to buy the Universal Connector you've linked above, or will I just need to buy one of the lancers you've mentioned and just connect it directly into the K7? :)
Just been using mine today, You order the Lance with the connection included eg for Karcher or Bosh or kranzel etc my links should be straight to one with a karcher k series connection but please check that you have the correct connection before ordering
Just to confirm K7 is a k series connection so that is k2 all the way up to k7
Hi mate. Nice video. Will the MJJC foam cannon work with Karcher K2 Follow Me model?
The Mjjc foam canon has worked with all my Karcher domestic pressure washers from k2 to k7, with manual fixed pressure guns, to variable control guns to the Bluetooth controlled guns, so I wouldn’t see why not on yours
Top job
what settings are you using with the K7? I was getting very watery foam. I have the Autoglym foam bottle gun.
Full power on each machine, on the k7 if you have the Bluetooth Lance like I was using, make sure you have the Lance on power setting not detergent and then swap to the snow Lance and it should stay at the same settings,
The autoglym snow canon/Lance is a good unit, and should give similar results to the Mjjc, especially on the k7, nice and thick so you can write your name in it, although the Mjjc just tops it with spray angle adjustment and the waited suction hose that let’s you get the last drop of cleaning fluid
I take it that your using autoglym pola blast or other snow foam product, not just car washing soap?
@@RichManPoorTech yeah, polar blast. When you say full power is that no.3 or boost?
@@RichManPoorTech I also use the K7 with the Bluetooth lance. The foam gun I use has a 1.1MM orifice. But I have a problem, if I use the K7 on power mode 2 and above it stutters (build pressure and drops it, builds pressure and drops again. It won't stop doing that.) Do you have any idea what the problem could be? What power mode did you use?
@@anthonyniessing7737 are you using water stop connectors if so swap for straight through connectors both at the tap and machine, ( and any in between) and purge air out through the machine before turning it on, hop this helps
Hi mate I have a better power washer than the karcher k2 but for my power washer you need a certain type of snow foam lance and it is really bad so the snow foam is really watery. Do you think it’s worth buying the k2 and getting a good lance?
If you have a better washer than the k2 you could get the mjjc pro with the adapter to suite your washer instead of the Karcher k series washer, that would be my choice
@@RichManPoorTech where can I buy the adapter?
@@RichManPoorTech what do you mean adapter
Can we use karcher 6/15
you can but you want the connector for that, the one i was using is for a k series, follow my link to mjjc direct and you can select whichever connector that goes with your pressure washer
far better.........Autoglym Polar Blaster Snow Foam Lance, Car Wash Foam Gun For Pressure Washer Application
I have one of those as well
Whilst this is cool and i do own k2 which i hardly used and now has stopped working (tried trapped air fix) but i can't justify paying this much for another washer when i could just pay £5 3 to 4 times a year for a car wash. Yes i don't wash my car every few weeks or month because i'm lazy :P
i don't wash my care every week like some do, but i will never take it to a automated car wash, i took my bmw coupe to one, and the wheel brush left swirl marks all along the side of my car, it took me weeks polishing it out, those hand washes are ok if you have a good one
Who clear car the sun day there all car is hot
Sun doesn’t hit my car in the morning as the car is in the shade from the house, but yes clean the car out of sun
I kinda find their soaps very overpriced products
You don’t need to use much so it lasts along time, worth it for the speed
This was comical. Completely uncontrolled and rushed application, pointing the gun all over the place almost like you were in a sword fight! Also why an earth did you have it set to the widest fan setting? - Gives you the worst coverage.
thank you for your comment, that gives me a idea for a video, i have multiple pressure washers and snow foam lances, Snow wars anyone
To much chat for me got bored .
Snow foam the house too you need to adjust it as it’s going everywhere including the house
Really poor video