DON'T REPLACE IT: HOW TO BYPASS LG WASHING MACHINE DOOR SWITCH STEP BY STEP.
Вставка
- Опубліковано 26 сер 2024
- In this video you will see how to test/to adjust/to bypass LG washing machine door switch, you will not replace it again after watching this video
Repair is done just by shorting pin no 3 to pin no 2, watch a video, subscribe , like, and share @felixtechnoaid2044 .
![Anular-Puentear blocapuertas lavadora. [Cancel-bypass door lock of Washing machines]](http://i.ytimg.com/vi/kfFr6RLqbEw/mqdefault.jpg)
Thank you! I removed the lock part and shorted it out while I wait for the new part to arrive we can still use the washer. Works great!
Hello sir,
It was very helpful, I tried it and it works perfectly. I bypassed the door lock directly.
Thank you very much.
yes it is working, If it has helped you out make sure you have yet subscribed to my channel
Like and share
Very usefull video thanks sir
Subscribe to my channel for more helpful videos like this, Like and share
Thank you❤️❤️
you can bypass it instead of buying a new one ( replacement), watch the video and see how you can do it❤️
Clear as mud
yeah👍
Subscribe, like and share
Adjusting the screw can cause the lock not to unlock. You then have to remove the top of the machine and remove the switch from the body. I just removed the red latch protuding from the switch with a grinder so it no long latches.
Okay
Excellent !
thank you, Subscribe, share and like this video
Hello how to repair, door lock switch has beem bybpassed but do not go spin dry only wash clothes amd rinse
Could you just put a diode on pin 3 then connect it to pin 2 on the harness end , the tape it or use a magnet to keep it out of the way?
what is the purpose of diode here? I don't undestand
@@felixtechnoaid2044 , I was just thinking you could use a diode and then put a resistor to simulate the lock exactly, you just need to know how much resistance the thermal material produces cold vs hot. But if a direct connection works, then 👍
@@BobHenderson-dr2wy I don't have much information on that, I shall do research see if it can work
Hello, I need your help. I bypassed the switch just by adding some thick tape inside the internal part of switch to remain pressed and make contact all the time. I did not remove the thermal sensor nor the spring mechanism. Now the door is permanently locked and unable to open😅. Even when i try mechanical force bypass by pressing the lock with haxo blade it doesnt work. Please guide to solve this thanks
Cut or remove plastic hook attached to the thermostat.
Haha 😂😂😂😂
@@jullx2 why are you laughing
looks like you forgot to remove the lock part. Felix didn't show this step in the video. He only said to do it. I'm glad I watch it a few times to make sure.
What is that yellow and black machine called you are using and the brand pretty please. I need to buy this today. Somebody.😅😅😅😅😅
it is called multimeter, you can buy Fluke it is a good brand.
it s called digital multimeter, you can buy Fluke, fluke is a good brand.
Will it spin dry?
Yes
Don't bypass switch is ok neutral supply fail it's pcb fault not switch bypass it's not proper solution door is open working process it's not solution
most of the cases they fail, you just bypass it it works fine, but not safe
@@felixtechnoaid2044you are wrong. Mickey mouse are for cheap people.
@BJcanal270 you made me laugh 😃, I visited your youtube channel, and now I came to understand why you say cheap people.
This solution is for chaep a.... People...
No problem, the important thing is that it sort out the issue, and cheap people are everywhere all over the world.
the solution is for people who need to do washing now. My wife couldn't wait for the part to arrive while the washing is piling up. As long as you don't have children this solution works well for grown ups.