DTF Epson 7900 1st Prints
Вставка
- Опубліковано 27 лис 2024
- #stayhangry
#dtftransfers #howtoprintdtf #dtfprinter #epsonet8550 #epsonxp15000
All DTF Supplies:
Use Code: Hangry
For a discount.
DTF Ink (CMYKW): dtgpro.com/cic...
DTF Film A3+ (13x19): dtgpro.com/cic...
DTF Powder: dtgpro.com/cic...
Rip Software:
dtgpro.com/cic...
-------------------------------------------------------------------------- Website:
www.hangrymusc...
--------------------------------------------------------------------------
Follow me on Social Media:
/ hangrymuscle
instgram.com/A...
--------------------------------------------------------------------------
To donate:
CashApp $zachwill949
Venmo: HangryMuscle
Email: contact@hangrymuscle.com
FULL DISCLAIMER: I make a small commission on my affiliate links
bought me an Epson Pro 7900 but only have acrorip 10.5. will that work with it? if so how since i don't see that model in the printer list. I would really appreciate your help.
Love it...Tkank you very much 👌
From left to right, what is your ink order??
Sup Hangry! You’re at it again. Great Job! How is the 7900 compare to the 8550 in terms of usage ( like easier to use), ink clogged and cleaning? You should do a video 7900 vs 8550.
Can't wait to see more about this printer, have the same one at home. Have my printhead out soaking trying to clear blocked nozzles and also have a new damper assembly to install, hopefully have time this next week to put it back together. What did you flush the lines with? And where did you order it from? I would be interested in seeing your settings in acrorip and see what channels you have what ink in. Will it print faster if you use 4 channels for the white?
Thank you
Yes Ill have some videos up this week. I need to check my dampers. How many nozzles are blocked? My orange is blocked. I use Acrorip 10.5 and cmyk+ww channels. Yes it would print faster with more white channels.
So your using acrorip 10.5, wide or regular and under which printer model are you using to make the 7000 work with dtf
hola nesecito ayuda urgente n se que hacer
tengo un plotter epson 7900 y quiero usarlo para sublimacion el acro rip 10.5 me sirve por que e visto el las caracteristica que solo funcional hasta el epson 7890 espero tu pronta respuesta gracias
Hello! I have an Epson Stylus Pro 7900 and I would like to know which Rip I can use for DTF printing and how I can get it?
Are you still using this printer? I recently set up using your videos but acrorip 10.7
Hi, in your opinion it is possible to convert a WT7900 to DTF, with which RIP? thank you
hello you can tell what rip softare do you use? thanks.(because compatibilityfor acrorip is missing for epson 7900)
I use Acrorip 10.5
What program did you use to print on this Epson 7900?
hi
great job
please can you tell us how you arrange the inks
CMYOffKWwwww
@@HangryMuscle Can you please share the ink configuration setting in Acrorip? Thanks Bro.
Did you have to cover the vacuum holes?
I use 9900. Use s different icc profile and your black will be solid
Are you using AcroRip? I'm picking up a 9900 this evening, and I'm hoping I can use AcroRip 10.5.2. Are you using "7900" for it?
@@redgeminipa yes I can help you configure
I am nervous! I just bought tbe SC p7000 and haven't got it out of the box.. can it be converted?!
ua-cam.com/video/y_49xu3cuoc/v-deo.html
would this be good for making stickers? I found a machine for 250$ used but it hasnt been used for 3 years. The guy said heads need cleaning. Should I grab it as a starter printer?
Not sure, I'm not familiar with the sticker process. Why not its only 250
After watching your video, I just bought an epson stylus 7900, could you upload a video on how to convert to DTF. Thanks thanks. Thank you.
Hi, yes. Here it is. ua-cam.com/video/rPyFYKw7KQ8/v-deo.html
Bro is the 7900 and 7890 are interchangeable carts?
No the chips on the cartridge will be different.
Hey buddy, quick question.
I just converted mine and I have acrorip also. I get a print error saying that white is empty. Is there a step I’m missing? Thanks
ua-cam.com/video/12GEjBFdxaw/v-deo.html
I have a problem with my epson 7900 it sent a code 0002. Do you have the program reset for this model? Thanks, I continue with the conversion of my epson 7900 DTF
Cartridges
Hi Hangry I have an opportunity to get a Epson Stylus Pro 9900, for 500 do you recommend this machine to be converted for dtf
Sure, why not? Are you planning on selling transfers? I would recommend getting a oven and powder machine too, otherwise curring will be a bit laborious.
@@HangryMuscle ok thank you I wait to long and someone else scooped it up, but I ended up getting an epson r3000 do u have any experience with these? Thanks
Do you know if I can convert a epson 9900 into a DTF printer?
Yes you can
How do you print across the full width of the film
With the print settings
Hi, my last printer I converted to dtf, I had to purchase the chipless firmare, does this use chipless? or how does that work?
The chipless firmware is for cartridges, this printer doesn't use cartridges.
@@HangryMuscle oh that’s great to know! Thank you!
@@HangryMuscle and I take it this printer dosent need an exit tray like the rest of the dtf printers?
Hey Bro. Do you mine sharing your Acrorip Ink Configuration settings. Would really Appreciate it.
ua-cam.com/video/12GEjBFdxaw/v-deo.html
I have just bought a 7900 to convert after watching your videos. Can you please clarify if you had to take any further steps to get this to work ( I am hearing I need to turn off the suction).
Also if you are still using the 7900 how has it been?
Thanks.
@hangrymuscle,it is possible with a epson stylus pro 7700 printer?
Not sure, look for a rip program that supports it.
@@HangryMuscle , Thanks a lot for Your help,Bro. I'll trying to do it .
How is the whie ink not running down??????
The correct settings and setup was used
@@HangryMuscle would you mind sharing those please? I plan on buying one but worried about that part
You have to show me how you convert that
I'll be uploading the conversion video, I have no idea, but so far its been an easy process,
@@HangryMuscle please upload full video in detail 🙏
As soon as possible.
Thanks in advance ☺️
Buen video saludos.
Gracias amigo, hola desde california
Hi
what acrorip are you using? I see the colors a little off, or is it because of the shot of your camera?... the ink does not run down, since I see that the film goes directly to the floor.
activate the subtitles, hehehe, I will thank you very much. my language is spanish :(
Acrorip 10.5. The colors might be off because of clogged nozzles or I need to use a different ICC profile.
No it doesn't
Possibly in the future, I'm still learning how to use youtube.