How to Setup: Longer Ray5 10w Laser Engraver!

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 25

  • @mikecruzado5775
    @mikecruzado5775 11 місяців тому +3

    Thank you you made my decision easy
    I’m getting one
    Thx

  • @ritaguillote4754
    @ritaguillote4754 Місяць тому

    how do you center it?

  • @tonigushue7400
    @tonigushue7400 Рік тому

    I set the whole thing up while watching your video. This thing will not frame on the Y axis for me. It only burns in a straight line. Any idea what the issue is? Doesnt matter if I use lightburn or LaserGrbl.

  • @MrExpo1999
    @MrExpo1999 Рік тому

    What was the fill settings for that last engraving of your logo?

  • @davidmschneider7368
    @davidmschneider7368 Рік тому +2

    Nice unboxing and first burn. Mine is otw. Which license from Lightburn did you need? I see 4 options out there.

    • @TheToughGuysTV
      @TheToughGuysTV  Рік тому +2

      I’ve just been re-doing the free version I couldn’t tell you which exact version. I’m sure I’ll buy it at some point! Doing a new video soon with a couple of cool projects so stay tuned! 🤘🏻🤘🏻

    • @michaelwillson6847
      @michaelwillson6847 2 місяці тому

      ​@@TheToughGuysTVhow did you manage to keep getting the free software 🤔😲

    • @TheToughGuysTV
      @TheToughGuysTV  2 місяці тому

      Unfortunately no, I pay for Lightburn now but it’s not too bad

  • @Gordon-kc5do
    @Gordon-kc5do 6 місяців тому

    I have a question it is about the rotisserie that you get with your machine aren’t you set it up and you change the numbers in the program when you go back to using the laser for doing on wood do you have to go back and change those numbers or are they set in the machine and they automatically go back or do we have to go back and reset the numbers? I hope this makes sense.

    • @TheToughGuysTV
      @TheToughGuysTV  6 місяців тому

      I believe the software you use should help guide you with a rotary attachment, but I never used one with this laser so I don’t know for sure unfortunately

  • @DuaneGryder
    @DuaneGryder Рік тому +1

    I do not see a link for the cutting bed

    • @TheToughGuysTV
      @TheToughGuysTV  Рік тому

      Added that to description! Longer sells one as well but it’s normally out of stock, apologies for missing that. It’s a 400mm X 400mm size, there are TONS of options online available, any of them will likely work. The one I bought is linked in description now. 🤘🏻

  • @photography.by.James.Wood.Jr.
    @photography.by.James.Wood.Jr. 2 місяці тому

    For engraving... How thick of an object can be engraved on?

    • @TheToughGuysTV
      @TheToughGuysTV  2 місяці тому

      With a laser like this you can get creative with building a platform under it to raise the laser head. But def want it to be sturdy. Generically probably only an inch or two at most.

    • @michaelwillson6847
      @michaelwillson6847 2 місяці тому

      ​​@@TheToughGuysTVI believe Lego slots in underneath the feet and makes perfect height adjustable platform try it ps watching through video now will have questions shortly

  • @purplecookie687
    @purplecookie687 7 місяців тому +1

    Is the xTool S1 better or na?

    • @TheToughGuysTV
      @TheToughGuysTV  7 місяців тому +1

      I think the S1 is superior yes: Full enclosure, vented air assist, riser base available, auto depth sensing, pinpoint positioning (for custom shapes), larger work area, and xTool creative software is superior than Lightburn in my opinion, it’s just all around a better machine BUT it does cost more, and for good reason.

    • @purplecookie687
      @purplecookie687 7 місяців тому

      @@TheToughGuysTV just brought one haha very excited its my first one

  • @vvanmeer5677
    @vvanmeer5677 11 місяців тому

    is there just a basic setting when you get the laser ?

    • @TheToughGuysTV
      @TheToughGuysTV  11 місяців тому

      Any settings I’ve used are through the software LightBurn. It dictates speed and power as well as how many passes the laser needs to make to complete the cut or engraving. On the small SD card included are some resource packs as well as template files for you too (or should be if they included it for you)

  • @keavinclark4859
    @keavinclark4859 Місяць тому

    I can't get this thing connected to my phone or computer and as far as the SD card, I can't even add pictures that show up on it after I download it from my computer, soon as I put it in the engraver the picture will not show up

  • @ROHVIDEOS
    @ROHVIDEOS Рік тому

    I just notice the metal cube my longer 5 bringed is half your, cant see how to focus correctly without damaging the equipment

    • @TheToughGuysTV
      @TheToughGuysTV  Рік тому

      Did yours come with the spacer? For making sure the laser is spaced correctly over the workpiece?

  • @EveryDayGuyStuff
    @EveryDayGuyStuff 9 місяців тому +2

    I need a logo cut!

    • @TheToughGuysTV
      @TheToughGuysTV  9 місяців тому +1

      Hey!! Man as soon as I’m set up to do so, I’ll definitely with you, would be honored to make your shop sign! 🤙🏻