I had this idea for a vertical antenna taking a 10 foot piece of 2 inch pvc tubing and putting in 6 gauge solid copper wire measure 18 feet coil to half its length put inside of pvc tubing caps on both ends one has a n connector for coax the other has a nut for a 102 inch whip to screw into, would make a 3/4ths wave antenna and work great if you get your swrs low
I have heard that some tried to build a full wave of 36' but I've yet to hear anyone who had much or any success trying it. The 102" stainless steel Whip is actually too short it should be closer to 108" or 9' which is an actual 1/4 wave.
Wow you only have a 20 ft tower, ( 2 ) 10 ft section, I put up 10 sections of tower all by myself, it took me about 2 weeks every 3rd section I guyed it off, the top guy wires ,i put insulators in 2 ft intervals for 20 ft out from the top set of guy wires,, to break up the ground plane effect,, it's a great directional beam..
Wast of time and money with ancient gamma feed wrong spacing Yagi design . This could be a great 10-meter monobander with 2 to 3 more dbd gain and would be so broad banded you could still use it on the chicken band🤣🤣
@@James_Bowie I hear you James, but now they shorten the element length by a third and replace it with loading coils on the ends. Miniature beams with the urban look for us city dwellers 😊
Like a flashback to the heyday of CB in the 1970s. Love it.
I have a 106 maximum maco, on a 100 ft tower and it's a very good setup, just like yours is going to be, so good luck with your hobby.
Is it Rohn 25g?
The way to do it! Love it!, How is the Antenna Beam holding now 6 years later?
Get yourself a tilt over tower it saves all the bother with cherry pickers .easy.good video m8.nice antenna.
Wow that is a huge antenna for sure. Good one.
Would be nice to see another video with this beam in action.
I had this idea for a vertical antenna taking a 10 foot piece of 2 inch pvc tubing and putting in 6 gauge solid copper wire measure 18 feet coil to half its length put inside of pvc tubing caps on both ends one has a n connector for coax the other has a nut for a 102 inch whip to screw into, would make a 3/4ths wave antenna and work great if you get your swrs low
I have heard that some tried to build a full wave of 36' but I've yet to hear anyone who had much or any success trying it. The 102" stainless steel Whip is actually too short it should be closer to 108" or 9' which is an actual 1/4 wave.
Great video, what is the boom length on the big yagi.
Nice antenna.
Wow you only have a 20 ft tower, ( 2 ) 10 ft section, I put up 10 sections of tower all by myself, it took me about 2 weeks every 3rd section I guyed it off, the top guy wires ,i put insulators in 2 ft intervals for 20 ft out from the top set of guy wires,, to break up the ground plane effect,, it's a great directional beam..
Makes me want to put up a long boom yagi
What happened?
WTG MACO MADE IN THE USA!👍
Why is everybody putting them horizontal
Less noise, and alot do this for skip
Cuz thats talks skip best HELLO
# s 2 u
138
Nor Cal
PLEASE USE ZOOM NEXT TIME
Over installation equipment
Wast of time and money with ancient gamma feed wrong spacing Yagi design . This could be a great 10-meter monobander with 2 to 3 more dbd gain and would be so broad banded you could still use it on the chicken band🤣🤣
This is ridiculous. Ancient antenna technology, big bulky and unsightly, in the neighborhood.
In the 'burbs for sure, but out there I don't think his neighbors would care at all.
@@James_Bowie I hear you James, but now they shorten the element length by a third and replace it with loading coils on the ends. Miniature beams with the urban look for us city dwellers 😊
Pussy!
I think its beautiful
Should be bigger