Great guide, I've already done this with a Tushy before but it's always good to have a refresher and get those best practices (I switched to try the 185 after my recent move) 👏
Do I have to remove the entire bidet to replace the cover that protects the water nozzle? Mine broke and I was sent a replacement part and it doesn't want to go on.
I followed your video and have had a persistent leak coming from the finger tightening lug that connects the hose to the t-joint. I’ve called Luxe with no help. They sent me a new t-joint and it has the same issues. I’ve wrapped and re-wrapped the bottom threading of the joint, making sure to wrap clockwise. Still leaking. Help?
Some tips. Don't put too much Teflon tape on the fittings and look at some videos on how to properly use. Don't go crazy on the tightening as you can tear-up the washer, on the smaller fittings you probably shouldn't be using a pipe wrench unless you can't get a good hand-tight on them. Check your seals well and check later when things are dry to be sure there isn't any slow leaks. One thing I wish is that the "water on" knob had a little more granularity to it. It goes from zero to spray across the room in a very little turn. Would be nice to be able to ease the spray a bit.
You disconnect the hoses where it's leaking. Dry off the connectors, wrap that white tape around the male end of the connector a few times, then reconnect the ends. The white tape acts as a seal when twisting on the connections.
Check your washers. You an easily overtighten, as well as undertighten. Going crazy with a pipe wrench can crumple the washer and push it into the pipe...yes, I know this from experience.
I currently have the Luxe 180 and am upgrading to the 180 plus. Do I need to replace all the hosing, or can I simply undo the nozzle connected directly to the 180 and then directly tighten from that hose to the new 180 plus?
Solid video, I plan on buying one after seeing how simple the install is.
Glad i saw your video, i definitely want the newer model for the easy install.
Thank u so much for this simple tutorial
Glad it was helpful!
Great guide, I've already done this with a Tushy before but it's always good to have a refresher and get those best practices (I switched to try the 185 after my recent move) 👏
Do I have to remove the entire bidet to replace the cover that protects the water nozzle? Mine broke and I was sent a replacement part and it doesn't want to go on.
I followed your video and have had a persistent leak coming from the finger tightening lug that connects the hose to the t-joint. I’ve called Luxe with no help. They sent me a new t-joint and it has the same issues. I’ve wrapped and re-wrapped the bottom threading of the joint, making sure to wrap clockwise. Still leaking. Help?
you forgot to say to flush the toilet to empty the tank before taking off the hose, for stupid people like me lol.
lol that probably wasn't a fun surprise
Ur not stupid, he should’ve mentioned it
Can you use the old t adapter from the previous model?
Some tips. Don't put too much Teflon tape on the fittings and look at some videos on how to properly use. Don't go crazy on the tightening as you can tear-up the washer, on the smaller fittings you probably shouldn't be using a pipe wrench unless you can't get a good hand-tight on them. Check your seals well and check later when things are dry to be sure there isn't any slow leaks.
One thing I wish is that the "water on" knob had a little more granularity to it. It goes from zero to spray across the room in a very little turn. Would be nice to be able to ease the spray a bit.
Thank you
Thoe video didnt say whoch end of the included wire goes tovthe toilet, and which end to the bidet attachment.
...also the end screen video ad thumbnails completely cover what you're pressing
What do I do if it’s leaking
You disconnect the hoses where it's leaking. Dry off the connectors, wrap that white tape around the male end of the connector a few times, then reconnect the ends. The white tape acts as a seal when twisting on the connections.
Check your washers. You an easily overtighten, as well as undertighten. Going crazy with a pipe wrench can crumple the washer and push it into the pipe...yes, I know this from experience.
Helped me do 2 installs!
I can't get my toilet seat to sit flush with this at all. Not sure what to do.
I currently have the Luxe 180 and am upgrading to the 180 plus. Do I need to replace all the hosing, or can I simply undo the nozzle connected directly to the 180 and then directly tighten from that hose to the new 180 plus?
Does the feminine wash really work when squirting from the back (rather than from the front)? Any downsides?
Notice how one end of the tubing has a filter and the other doesnt. Should say which end goes where
These are the best. My family can't live without them.
Great video.
Installed 3 of these and all were a pain the the ash.
Gdje kupiti
How much is that?
What I don't get, if this is replacing an older model you just need to add the feed hose to the new bidet
Took about ten minutes. I had to take the toilet seat off.
Ts never takes 10 mins