Do it Nikki 👍💪🏻 Just be patient to Not cross thread when you turn the nuts. Do Not put Too much force on the wrench either, kinda turn by hand til snug then about a 1/2 to 3/4 turn more. (If it leaks you can always tighten it a bit more) Keep checking for leaks daily for a week, then once a week. *also periodically, cause sometimes the water company might accidentally bump the water pressure up & that might (might, rare) cause a leak. Good luck. You Can do it.
Thank you for this excellent tutorial. Unlike everyone else I needed to know how to UNinstall one of these things. From my experience I want to caution folks to make sure there are no slow leaks, your point about using the plumbers tape is good. My tenant vacated my rental house and left one of these bidet attachments , immediately I noticed that the toilet was not level. Looking closer I saw that water had been dripping and rotted the floor ! What a mess, and expense ! She was there for five years , unfortunately I don’t think she cleaned the bathroom very often so she probably didn’t notice. I would say, even after you have installed the bidet that it’s a good idea to check periodically for leaks.
Thanks for this! I'm a visual learner and have to see someone actually doing it. Pictures are ok but seeing it in action helps a lot. And that was funny when you turned it on 🤣 I figured that would happen!!
Great toot! ……The paper instructions weren’t terrible, but a quick vid to play as I installed was way faster. Super easy to install & the wrenches that came with didn’t even fit. Total process took 10min. This lil’ guide + $30 is quite honestly something everyone should invest in! Thanks for the accuracy & simplicity! Happy poopin’!!
Thanks for sharing. The Teflon tape is for metal to metal threads, also the metal and plastic three way fittings are for 2 different size provisions of your toilet.
4:27 LOL. That made this video. Was not expecting a fact-finding mission to turn into a ha-ha. Thank you! You should put this under comedy for that one! Made my day
I brought mine in 2020 and have yet to install it because of fear, however, you made it look so easy that I intend on installing mine tomorrow. Thank you.
I tried to install it and there’s a stuck screw and I cannot get it off. I was able to drain the tank, disconnect the water line, and removed one screw and now I’m stuck. I tried to use some tool my daughter let me borrow but it didn’t work. I put everything back together and gave up and now I have a loose toilet seat.😜
Thanks for the tutorial. Although I would suggest dealing with the pipes first before attaching the bidet to the toilet due to the space between the wall and the pipes. An issue I ran into was that my pipe was leaking even though it was closed all the way, and by the time I was able to attach all the pipes together the floor was nearly flooded.
Started my install trying be to confident with the direction and my water was leaking a bit, I believe it was due to water in my tank leftover (I emptied it as much as I could) but wasn't sure. Thank you for confirming this in the video! I now feel confident to finish the install!
I just want to see the way you’re doing your video is perfect. You cut to the Chase you should turn this into a full-time job doing videos the way you do you don’t beat around the bush. You get straight to the fact keep it up. You’re doing a great job.
thanks for the video. package came with two t adapters, one metal one plastic, instructions only mentioned metal one, didn't know which one to use so came to your video and found out i could use either one. thanks!
I have a Luxe bidet Neo 320, but I kept putting off installing it. I almost did it last Saturday, but I decided to wait until the maintenance guy was here so that if anything went wrong I could call him up. Unfortunately I would not be allowed to drill a hole to get to the warm water too, but it's nice to know that the cold water can still work and be tolerable.
Great video especially the test. What seat do you have. Mine doesn’t work because of the elevated rear and our seat isn’t level and flexes in the back. Thanks
Easy to install, ua-cam.com/users/postUgkxjA-hDN2m8_mi0Dg0JD8U6QiArozIAc4I and comfortable. No idea what other people were talking about when they said it was difficult to install or uncomfortable.
Bought a place to live and one of the bathrooms had a bidet. I tried it and I never went back. The amount of toilet paper you will never use again is insane.
Followed this process exactly. But my problem is our toilet seat is now lifted up and does not sit flush with the toilet. I can’t see where I could make any adjustments for this problem to prevent eventually cracking/breaking the toilet seat. Any help?
Short and sweet. Thanks! I also did the stupid thing and didn't turn it on slowly. Got myself wet lol. You'd think that after seeing you do it I'd keep this in mind. Nope lol. Thanks again!
Thank you for doing this! I was wondering about this product. The one I had before needed an outlet and in my development they don’t put them close to the toilet unfortunately
I don’t have this bidet per se but the attachments are all similar. I have the metal T adapter and now only getting water flowing to bidet and not the toilet. Any suggestions?
Toilet seat is now 1" in the air. And when one sits on it, toilet seat goes down and puts pressure on the cover and sprayer no longer works, doesn't extend. Did you have to add bumpers to this? And if yes, do bumpers stay put or fall off?
My toilet has a static pipe, not the flexible kind attached to your toilet. Should I just replace the existing pipe? Any reason for that type of plumbing being done on a toilet?
Hand this model and loved it. Lasted about 3 years then the handle on the unit started to leak. Just fyi. There are better models out there. Once you get one you wont want to use another toilet.
Install was easy but there’s a huge gap at the front of the toilet seat on mine. I’m confused because my toilet looks exactly like the toilet in the video. There’s a solid 2-2.5 inch gap at the front after install . How do I correct this?
Got it I’m but my toilet seat comes down to much when you sit down. And hits the top of the mechanism so effectively making it miss your target lol there’s about a inch gap now from Toilet seat to toilet of no ones on it. Did I do something wrong or is it my toilet seat design?
Been wanting to install but like most here we are scared of minor plumbing jobs... Not anymore...clean booty here i come 😅 (water attack at the end is priceless 😂)
The ending: "OH! Sh... Perfect." LOL Well, which is it? A surprised, "Oh shit!" or, "Perfect!" It sure looked like it was spraying off to the side rather than being centered. This is a very helpful vid. I'm just wondering if you needed to make any adjustments?
Thanks for the video and saving my sanity. I came here because I had a leak and only when watching your video did I see that the rubber washer you have in you T piece is missing from mine!
@WorldofTech I usually add a bleach tablet in my water tank. I was wondering does the water to clean you come from the tank or the pipe. If it comes from the tank than I won't be able to use the bleach tablets am I correct?
You might want to pin this comment: I’ve noticed after installing the bidet the tank continues to fill. This is because when we tighten the tee it moved the fill Value. To fix this slightly turn the full value until you here it stops! Your welcome:)
After I installed the toilet seat back over the bidet, the toilet seat wouldnt sit flush with the bottom of the seat. I did exactly what you did in installation .... 😔
Hey! I just found this video along with other videos I missed Didn’t receive it on my notification. This is an interesting review on this gadget for the toilet. So what’s your thought on it since you had it installed.
Thank you! It's been sitting here for weeks. Waiting for my husband to install it...... I'm going to do it myself now.
Do it Nikki 👍💪🏻
Just be patient to Not cross thread when you turn the nuts.
Do Not put Too much force on the wrench either, kinda turn by hand til snug then about a 1/2 to 3/4 turn more.
(If it leaks you can always tighten it a bit more)
Keep checking for leaks daily for a week, then once a week.
*also periodically, cause sometimes the water company might accidentally bump the water pressure up & that might (might, rare) cause a leak.
Good luck.
You Can do it.
Lol same I’m not waiting any longer
Same here 😂
Get his ass girl
hah, that's ridiculous. My partner and I have an agreement; she buys it, I build it. Within a day or two.
Why did I burst out laughing when that water bit you 😂😂 I died. Thanks for the tutorial
You got one for Christmas too?🤣
caught us off-guard i guess. i haven't laughed harder in a while
Just installed mine and the same sh$t happened to me..lol. Gotta watch out for the spray of water!! Thanks for the Tutorial.
Cause it was a genuine reaction 😂
That test spray was essential for me to know it works 😂
Thank you for this excellent tutorial. Unlike everyone else I needed to know how to UNinstall one of these things. From my experience I want to caution folks to make sure there are no slow leaks, your point about using the plumbers tape is good. My tenant vacated my rental house and left one of these bidet attachments , immediately I noticed that the toilet was not level. Looking closer I saw that water had been dripping and rotted the floor ! What a mess, and expense ! She was there for five years , unfortunately I don’t think she cleaned the bathroom very often so she probably didn’t notice. I would say, even after you have installed the bidet that it’s a good idea to check periodically for leaks.
my mans got attacked at the end!!! LOL
Thank you for this video. I am a 60+ woman and just installed the Neo 120 by myself in 15 minutes. Yay!
Haha good job!!
Helpful. Now water leaked on mine. I learned from your mistakes. Thanks for not editing. Your video is better than the tutorials on the Luxe website.
Thanks for this! I'm a visual learner and have to see someone actually doing it. Pictures are ok but seeing it in action helps a lot. And that was funny when you turned it on 🤣 I figured that would happen!!
It was funny at the end. I tested mine with the seat down but I had to wipe up water from the floor
Great toot!
……The paper instructions weren’t terrible, but a quick vid to play as I installed was way faster. Super easy to install & the wrenches that came with didn’t even fit. Total process took 10min. This lil’ guide + $30 is quite honestly something everyone should invest in!
Thanks for the accuracy & simplicity! Happy poopin’!!
Test run and it hits the spot… What we’re all looking for in a bidet tutorial.
Thanks for sharing. The Teflon tape is for metal to metal threads, also the metal and plastic three way fittings are for 2 different size provisions of your toilet.
4:27 LOL. That made this video. Was not expecting a fact-finding mission to turn into a ha-ha. Thank you! You should put this under comedy for that one! Made my day
Lol
I brought mine in 2020 and have yet to install it because of fear, however, you made it look so easy that I intend on installing mine tomorrow. Thank you.
well how is it? :)
Did you install ?
I tried to install it and there’s a stuck screw and I cannot get it off. I was able to drain the tank, disconnect the water line, and removed one screw and now I’m stuck. I tried to use some tool my daughter let me borrow but it didn’t work. I put everything back together and gave up and now I have a loose toilet seat.😜
The ending made my morning, thank you for the laugh hahaha
perfect tutorial! didn't even need the sound lol
great job filming this
Thank you!
LOL the ending, Thanks for the tutorial! I got a Bidetto bidet but install was pretty much the same
Thanks for the tutorial. Although I would suggest dealing with the pipes first before attaching the bidet to the toilet due to the space between the wall and the pipes. An issue I ran into was that my pipe was leaking even though it was closed all the way, and by the time I was able to attach all the pipes together the floor was nearly flooded.
I learned the hard way to install the pipes first but I got mine installed with no issues
Low setting seems strong. What's the high setting for? Enemas?
Lol
Lmaooo!!!!
To pop hemorrhoids 😆
Started my install trying be to confident with the direction and my water was leaking a bit, I believe it was due to water in my tank leftover (I emptied it as much as I could) but wasn't sure. Thank you for confirming this in the video! I now feel confident to finish the install!
Me too.
😊 2:33
I had to rewatch the end. Very funny. Thanks for the video. I think I'm going to get one.
You’re awesome
The water to the face was hilarious 😅
Thank you for this! Perfect tutorial. Straight to the point and clear.
I followed you step by step and even screamed when I turned on the water 😂 it was still unexpected
I just want to see the way you’re doing your video is perfect. You cut to the Chase you should turn this into a full-time job doing videos the way you do you don’t beat around the bush. You get straight to the fact keep it up. You’re doing a great job.
Such a well made to the point instructional video. Good job.
Thank you World of Tech - video still works in 2020! This little lady go the bidet installed in 30 minutes thanks to you!
thanks for the video. package came with two t adapters, one metal one plastic, instructions only mentioned metal one, didn't know which one to use so came to your video and found out i could use either one. thanks!
The ending was funny as hell 😂😂😂
Ha! Loved the happy ending. 😂
I have a Luxe bidet Neo 320, but I kept putting off installing it. I almost did it last Saturday, but I decided to wait until the maintenance guy was here so that if anything went wrong I could call him up. Unfortunately I would not be allowed to drill a hole to get to the warm water too, but it's nice to know that the cold water can still work and be tolerable.
Thanks for this tutorial. Super easy instructions.
Great video especially the test. What seat do you have. Mine doesn’t work because of the elevated rear and our seat isn’t level and flexes in the back. Thanks
Thank you for making this! It made my installation so easy.
Thanks for this video! I just finished installing my bidet with your help :D
Fantastic!
Thank you just installed my net 110 using your tutorial. P.S . That first squirt splashed me so bad 🤣
😂😂
Easy to install, ua-cam.com/users/postUgkxjA-hDN2m8_mi0Dg0JD8U6QiArozIAc4I and comfortable. No idea what other people were talking about when they said it was difficult to install or uncomfortable.
Thanks! You made installation much easier!
Is this a toilet accessory and how much is it?
Bought a place to live and one of the bathrooms had a bidet. I tried it and I never went back. The amount of toilet paper you will never use again is insane.
Hey man great video to the point no lag nothing that's the way videos should be done. And your voice sounds like a young Clint Eastwood. 👍🏻
Thank you! Got it installed in less than 15 minutes!😁
Followed this process exactly. But my problem is our toilet seat is now lifted up and does not sit flush with the toilet. I can’t see where I could make any adjustments for this problem to prevent eventually cracking/breaking the toilet seat. Any help?
Buy toliet bumpers.. they sell them on Amazon.
Put it on and the seat and top don’t lay flat on the porcelain bowl,the thickness of the cleaner makes it so it doesn’t lay flat any suggestions
Short and sweet. Thanks! I also did the stupid thing and didn't turn it on slowly. Got myself wet lol. You'd think that after seeing you do it I'd keep this in mind. Nope lol. Thanks again!
Lol
Thank you for doing this! I was wondering about this product. The one I had before needed an outlet and in my development they don’t put them close to the toilet unfortunately
Great tutorial! (I'm commenting to remind myself to watch this video later.)
Mine doesn't have water pressure like that at all. Also, the nozzle clean doesn't work. Any idea why?
I don’t have this bidet per se but the attachments are all similar. I have the metal T adapter and now only getting water flowing to bidet and not the toilet. Any suggestions?
Toilet seat is now 1" in the air. And when one sits on it, toilet seat goes down and puts pressure on the cover and sprayer no longer works, doesn't extend.
Did you have to add bumpers to this? And if yes, do bumpers stay put or fall off?
Ok, I'm going in! I can't wait.
Thanks for taking the time to help a brother out!👍
Best video love the end test there 😂
I have to get used to the cold water but it does an excellent job.
My toilet has a static pipe, not the flexible kind attached to your toilet. Should I just replace the existing pipe? Any reason for that type of plumbing being done on a toilet?
This was actually a very informative review. Nice explaining 💯
Thank you so much! This was just perfect for me; very easy to follow!
Thanks a lot. It really helped. I had to shut of the main because the tap wasn't shutting off. But I did. Yaay..
Got it all hooked up with no issues! Thanks so much for the video!
Hand this model and loved it. Lasted about 3 years then the handle on the unit started to leak. Just fyi. There are better models out there. Once you get one you wont want to use another toilet.
How long were the bolts for the seat? I couldn't get my toilet bolts to reach-- they were too short with the bidet thingy raising things up.
Install was easy but there’s a huge gap at the front of the toilet seat on mine. I’m confused because my toilet looks exactly like the toilet in the video. There’s a solid 2-2.5 inch gap at the front after install . How do I correct this?
Did your toilet sit close properly did you have to add bumpers to underneath of the toilet sit?
Got it I’m but my toilet seat comes down to much when you sit down. And hits the top of the mechanism so effectively making it miss your target lol there’s about a inch gap now from
Toilet seat to toilet of no ones on it. Did I do something wrong or is it my toilet seat design?
If u have a gap then just buy toilet bumpers.
@@WorldofTech yeah just ordered some from
Amazon. Great video, Thanks you!
That ending "O Shit" made me laugh too hard.
thank you 🙏 just installed mine
best investment ever
What kind of toilet is that on the video? Will it fit...glacier bay toilet
What about your toilet seat. Is it really high up off the toilet bowl?
The end of this video is so good lmao thank you for this “….anyway” lmao
Is it available in Luxembourg
Been wanting to install but like most here we are scared of minor plumbing jobs... Not anymore...clean booty here i come 😅 (water attack at the end is priceless 😂)
Great step by step process. I just wish the bottom lid closed evenly.
This video helped me out alot ihstalled mines without a problem,thank you
What brand toilet seat do you have with this bidet…
On the whole, this was helpful 🤪
Thanks! Just put mine on and you helped.
Dang, that last five seconds was hilarious! Nonetheless, I appreciate tutorial.
what did you do with the bolts that were attached to the screws. were those not needed anymore?
Perfect instructions, thanks!
3:40 did you turn off the valve after the water tank is filled?
Thanks for the video, everything else was very clear!
Did the t adapter ever leak? Is it still working properly?
Yes still perfect no leaks or anything
@@WorldofTech mine is leaking where it attaches to the bidet arm, it's as tight as it'll go and yes i used the threading tape
I bought 1 but mine came with a hot water hose and a cold 1 if i just plug the cold 1 on will it spill water through the non attached hose?
I can’t get to the water hose attached to the toilet. It’s way in the back. New toilet model. Can I attach the T to the main water line??
Awesome video. You made it look easy and do able . Thank you
The ending: "OH! Sh... Perfect." LOL Well, which is it? A surprised, "Oh shit!" or, "Perfect!" It sure looked like it was spraying off to the side rather than being centered. This is a very helpful vid. I'm just wondering if you needed to make any adjustments?
Thanks for the video and saving my sanity. I came here because I had a leak and only when watching your video did I see that the rubber washer you have in you T piece is missing from mine!
Um I started turning off the water to the tank and it started dripping is that normal?
Great Tutorial! Could not have done it without this video! Thanks a Million!
What toilet seat do you have? My toilet seat isn’t flat on the bowl
I too would like to know what toilet seat you have.
Thank you & you showed is in less than 5mins 🙌🏼🙌🏼
This video was very helpful! Thanks
This was amazing 👏🏾 you made this process easier, Thank you 😊 💓.
Just installed it. Got sprayed in the face like dum dum lol. Thank you
My 120 just came with only a metal tee -- no plastic. And only the metal adapter is listed in the manual, but no mention of a plastic one.
@WorldofTech I usually add a bleach tablet in my water tank. I was wondering does the water to clean you come from the tank or the pipe. If it comes from the tank than I won't be able to use the bleach tablets am I correct?
Thanks for the install video, going to install one in the apartment soon
You might want to pin this comment: I’ve noticed after installing the bidet the tank continues to fill. This is because when we tighten the tee it moved the fill Value. To fix this slightly turn the full value until you here it stops! Your welcome:)
Great! Thanks for the video
That looks like a lot of tension on the water supply line from the wall. Is that OK like that?
After I installed the toilet seat back over the bidet, the toilet seat wouldnt sit flush with the bottom of the seat. I did exactly what you did in installation .... 😔
Then u need toilet bumpers to make it even.
How do i raise the end of the seat so it doesn't bend.
If there is a gap then it’s best to buy toliet seat bumpers.
Hey! I just found this video along with other videos I missed Didn’t receive it on my notification. This is an interesting review on this gadget for the toilet. So what’s your thought on it since you had it installed.
Let’s put it this is way... I wish I had this years ago. U won’t understand until u actually have one.