When this video came out Alynn was 11... And now she is 17 and she is awesome. Good job on raising an amazing daughter. - Sincerely, Alynn's moderator.
Thank you so much for this video - all the others out there as you said did not show how to get this particular drawer front off and although our beko fridge is newer the technique starting at the bottom helped us to replace our drawer front as it had been broken.
I don't usually comment on UA-cam but your video was such a big help for me and others im sure. I had no idea how an earth one was meant to take off these dirt traps on the draws but your video was so informative that I had them all off within minutes and no breakages. Thank you so so much.
Thanks for encouraging me to deal with this, and particularly to be patient. The critical stage was to unclip the circular 'lugs' on the sides of the drawers. Your video concentrated on the base whereas the sides were more difficult. I used a mixture of a blunt dinner knife and small screw driver. Some rather dramatic snapping sounds in between but four beautifully clean drawer fronts and no broken bits. I am sure doing it in room temperature as opposed to straight from the cold freezer helps. . Thank you.
Taking the front off to clean inside would NEVER be on the radar in this household. However, I only broke the old one in 3 places trying get it off (because I broke it a few months ago). So I don't recommend taking it o0ff to clean but thanks for your video Tracey it really helped I had absolutely no idea how to get it off.
Just tried this with a drawer I was about to throw out due to mold, worked a treat. Used two small screwdrivers and went slowly before I knew it door was off and cleaned and put back into use looking like new, brilliant!
Thank you! I spent a while trying and failing to replace a broken door (the new one i bought from beko had no instruction with it), and also a not useful official tutorial showing the wrong type of door.your video was something and i then managed it in seconds! Thanks for taking the time to make this
I was surprised you went from the bottom. When I've been looking at the one I was trying to take apart a few minutes ago I thought for sure the bits sticking out on each side would prevent it popping off. I'll give it another go now I see how easily it comes off!
Brilliant. One of these came with our caravan. Knew there had to be a way of taking the front off to clean but would never have got there without breaking something without this.
Thank you so much for this!!!!!! I brought a second hand freezer and it was immaculate apart from those little food remains in the crevices! Because of your video I was able to fully clean and take apart the drawer! Very informative😜😄
Many thanks for this, I was baffled. Doing this I found that sometimes the bottom (in life the top) of the lid would snap out. Gently pushing in the side of the drawer would release the lid completely.
Thank you so much for recording this! We had such a struggle working it out and you’ve helped us massively! :D We now have a shining clean freezer again!
Worked for me, no damage - thank you! I would add one thing I've seen elsewhere though: let the whole drawer warm up before getting to work on it. The plastic should be less brittle when it's reached room temp.
I never normally never leave comments but oh my god this video was a life saver!!!! Thank you thank you thank you thank you thank you!!! you're the best Tracey!
Hi Tracey I know this is an old video, I would like to say thank you and add that on replacement I shaved the side one way clips down with a scalpal so they work both ways after you release the bottom clips. I must learn how to make videos and upload them to UA-cam
Thank You David, I have intended to do more videos but never got around to it! Amazed at the response to this one 😊 Glad you got it sorted and did a better job of the removal 👍
Hi Tracey, great video. Really useful. However, I found that the sides would still not pop off. When I looked on the inside, there are four tabs that hold the sides in place. Each one had a thin piece and a thicker one holding it in place. I found that if you carefully cut the thin piece then the tab hinges, allowing you to apply pressure carefully on the outside which lets the side pop out. You have to be VERY careful, both with the cutting and with the subsequent 'popping'. I also found that the tabs sometimes stuck to the sides and required a gentle push to release them. Hope this helps.
Exactly Steve, if I could upload photos I would. Cut the short piece of plastic on each of the crescent shapes and the lugs then bend inwards easily :)
Drawer front pin of the freezer bit at the top got broken so needed to swap with the identical drawer front (which doesn't need the hinge pin). Ideal for getting the drawer front off in one piece so I could then swap it with the broken bit.
Sorry, but: I couldn't remove the bezel like you showed The bezel is now broken - but I wanted to change it anyway. But I still just want to clean the other aperture.
When this video came out Alynn was 11... And now she is 17 and she is awesome. Good job on raising an amazing daughter.
- Sincerely, Alynn's moderator.
@Vniulus Its in the Genes. Amazing Mothers create amazing children
@@Mumdoesstuff and she's humble too
This video changed my life, I love it so much. Great work MumDoesStuff
@@uno_revers lol I might use that name
@@Mumdoesstuffyou're the best fr
Thank you so much for this video - all the others out there as you said did not show how to get this particular drawer front off and although our beko fridge is newer the technique starting at the bottom helped us to replace our drawer front as it had been broken.
Thanks for taking the time to do this. Typical crap company when they don't even include this sort of info in the manual! :-)
I don't usually comment on UA-cam but your video was such a big help for me and others im sure. I had no idea how an earth one was meant to take off these dirt traps on the draws but your video was so informative that I had them all off within minutes and no breakages. Thank you so so much.
5yrs later, you’re a diamond and thank you so much. It was absolutely doing my head in. They should have quick release clips
ua-cam.com/video/vUcICY20z34/v-deo.html
Thank you. Slow and steady and off the fronts all popped. Could not have done it without your instructions 👍👏❤️
Thanks for encouraging me to deal with this, and particularly to be patient. The critical stage was to unclip the circular 'lugs' on the sides of the drawers. Your video concentrated on the base whereas the sides were more difficult. I used a mixture of a blunt dinner knife and small screw driver. Some rather dramatic snapping sounds in between but four beautifully clean drawer fronts and no broken bits. I am sure doing it in room temperature as opposed to straight from the cold freezer helps. . Thank you.
Thank you for both the removal and replacement videos. Worked a treat, and made a huge difference.
God bless you 🙂... I was getting so annoyed of not finding a way to do it...and no info in their website or anywhere!!.. THANKS A LOT 👍
Taking the front off to clean inside would NEVER be on the radar in this household. However, I only broke the old one in 3 places trying get it off (because I broke it a few months ago). So I don't recommend taking it o0ff to clean but thanks for your video Tracey it really helped I had absolutely no idea how to get it off.
Well done Tracy!
Just tried this with a drawer I was about to throw out due to mold, worked a treat. Used two small screwdrivers and went slowly before I knew it door was off and cleaned and put back into use looking like new, brilliant!
Brilliant, Glad it worked for you x
Thanks, worked a treat. Now lets watch the video to get it back on
Thanks .. you sorted out the problem to remove the front over ..I spent 10 minutes puzzling over that...it popped!
Excellent, 10 times more informative than the big companies.
Thank you! I spent a while trying and failing to replace a broken door (the new one i bought from beko had no instruction with it), and also a not useful official tutorial showing the wrong type of door.your video was something and i then managed it in seconds! Thanks for taking the time to make this
Genuis ! My drawers were slightly different but came off fairly easily with your technique…….and clipped back on even easier.
Great stuff ! Companies should give this info as standard. Well done you
I was surprised you went from the bottom. When I've been looking at the one I was trying to take apart a few minutes ago I thought for sure the bits sticking out on each side would prevent it popping off. I'll give it another go now I see how easily it comes off!
Thanks, you stopped us from smashing the draws to bits.
Brilliant. One of these came with our caravan. Knew there had to be a way of taking the front off to clean but would never have got there without breaking something without this.
Thank you so much for this!!!!!! I brought a second hand freezer and it was immaculate apart from those little food remains in the crevices! Because of your video I was able to fully clean and take apart the drawer! Very informative😜😄
Brilliant! Gotta love the Internet! Along with Chagfordrob (my Aga servicing hero!)... you make life better 👍Thanks Tracey
Still proving very helpful. Thanks Tracey.
Many thanks for this, I was baffled.
Doing this I found that sometimes the bottom (in life the top) of the lid would snap out. Gently pushing in the side of the drawer would release the lid completely.
Thank you so much for recording this! We had such a struggle working it out and you’ve helped us massively! :D We now have a shining clean freezer again!
Superb...massive help changing my broken Beko freezer front! Great sense of humour too! ❤
Thank you, MumDoesStuff
Worked for me, no damage - thank you! I would add one thing I've seen elsewhere though: let the whole drawer warm up before getting to work on it. The plastic should be less brittle when it's reached room temp.
Great advice, Thank You
Thank you, this really helped. I have taken my drawers apart, cleaned and put back together without breaking!
I never normally never leave comments but oh my god this video was a life saver!!!! Thank you thank you thank you thank you thank you!!! you're the best Tracey!
Thank you Tracey! I could give you a hug now!❤
Thank you so much this was so helpful! I just broke one of mine😅but luckily I came across your video🙏🏻
Hi Tracey I know this is an old video, I would like to say thank you and add that on replacement I shaved the side one way clips down with a scalpal so they work both ways after you release the bottom clips.
I must learn how to make videos and upload them to UA-cam
Thank You David, I have intended to do more videos but never got around to it! Amazed at the response to this one 😊 Glad you got it sorted and did a better job of the removal 👍
Hi Tracey, great video. Really useful. However, I found that the sides would still not pop off. When I looked on the inside, there are four tabs that hold the sides in place. Each one had a thin piece and a thicker one holding it in place. I found that if you carefully cut the thin piece then the tab hinges, allowing you to apply pressure carefully on the outside which lets the side pop out. You have to be VERY careful, both with the cutting and with the subsequent 'popping'. I also found that the tabs sometimes stuck to the sides and required a gentle push to release them. Hope this helps.
Exactly Steve, if I could upload photos I would. Cut the short piece of plastic on each of the crescent shapes and the lugs then bend inwards easily :)
Thanks so much for this video! Total life saver!
You saved me from the mould in the fridge, thank you 💜
Wonderful. Now, can you show me how to get the fast freeze drawer back in without breaking off the nibs? ;)
ALYNN DOES RAIDING
Thank you ☼
Legend! Didn’t even break mine 😉
I found by using 2 flat screw drivers worked better for me on some Turkish brand called Lamona, but draws very similar to Beko ones you did video of.
Thank You hopefully your advice will help others who are stuck x
Thanks Tracey it's a great help
Wow, this was so useful! I also broke a small piece off before resorting to Google and here is the guidance I needed!
Brilliant, did the job a treat
Thank you are a life saver
Worked a treat. Thanks very much 👍👍
Thanks this was so helpful
Thank you :)
Great clear vid and really helpful Thanks
Thank you 😊 you're a star 😊
Thank you👍👍
Push sides first my love and then use even a flat peg. Takes 15 seconds. Thanks for video
Thanks a lot.
Thank you!
Thanks - worked a treat
Thanks, helped me out !
AlynnsMomRemovesABekoFreezerDrawFront
Drawer front pin of the freezer bit at the top got broken so needed to swap with the identical drawer front (which doesn't need the hinge pin). Ideal for getting the drawer front off in one piece so I could then swap it with the broken bit.
Excellent
you. are. a. star.
Thank u sooooo much
Aylnn does raiding
Thanks. Sorted.
MarrIsLate
ThisIsSadge
Sorry, but:
I couldn't remove the bezel like you showed
The bezel is now broken - but I wanted to change it anyway. But I still just want to clean the other aperture.
Never mind K ask L 😂
WHO is L??? @@DnaResults-bv7ou