Rebuilding my Honda Prelude (H22A4) Part 2
Вставка
- Опубліковано 10 лис 2020
- Part 2 in rebuilding my engine. Hope you enjoy it be sure to leave a like and subscribe for more vids soon to come. In this video I replace all the old timing stuff with all new oem parts. From old to new. Got tons of more stuff for y’all if I could just get this video a
couple likes so I know I’m doing alright. Greatly appreciate it.
In this vid I’m covering:
#water #pump #balance #shafts #gaskets
#stripped #bolts #timing #tensioner #pulley #sensors #gears #belt #install #torque #spec
#honda
#hondaprelude #hondaprelude5thgen #bb6 #bballiance #bb6nation #preludenation #prelude #hondanation #h22 #H22A4
#engine #jdm #preludepower #ludes #5thgenprelude #bb6nation #hondalife
#stayluding #rebuild #project
I've been dreading the day that I'd have to rebuild my h22a4 but you made it look so easy. I'm shoot you a PM since I live in Vegas too.
Clean job 👍💪👏make me excited to start rebuild my engine on my 2001 sh22a I got the most of the parts from Japan 🇯🇵
Man... Wish I had this video to watch when I was doing my timing belt. Visualizing the balance shaft re-installation like this is excellent!
Thank you!
Great continent man! Very detailed and precise! 😁
Thank you friend!
@@lvigarage6108 yes sir! 😁
Nice one🔥
thanks for sharing
Absolutely excellent video man. Learn so much from you. Any chance of showing the timing belt tutorial in detail buddy? And does the balancing belt require timing in fitments?
this is great.
Nice build series, man! I've been considering rebuilding my h22a4 as well, however I have heard from local shops that the boring and honing of the frm lined sleeves tend to fail even when using the correct honing procedure and stone. I've been recommended to just sleeve the cylinders with cast iron liners instead of trying to go the overbore/hone route. Any thoughts? Did you do any cylinder work on this engine?
Hey man what was the tap and bolt size you did for the balance gear bolt that snapped mine snapped as well
im nervous but i have to do it
Did you use a rebuild manual?
Очень грамотно 😊
Looking for an engine for an 89 prelude project are you closer to the twin cities ,MN OR WESTERN NORTH DAKOTA. WOULD A NEWER CIVIC MOTOR WORK, OR IS THE interglacial the best
I’m searching everywhere and I can’t find out how to put the crank in time someone plz help
nice job , but u need to go manual tensioner the one you install always bleeds out
Oh yeah they suck but I did end up switching it out but once it was in the car
How’s the rebuild running bro???
Good video .. any diferences after the rebuild ? Mpg gas mileage .. vibrations better hp ??
200 Compression on all 4 cylinders. And no leaks can’t complain.
Hi my exhaust side cam cap(behind dizzy) has been sheared off(on the lug that holds the stud that the valve cover tightens too. Is it OK to use a cam cap from a different h22a or can the bit that's sheared be welded back onto my original? Thanks
It’s just a cap so I don’t see why not if it fits it fits lol
У вас есть инструкция по сборке h22a?
Все усилия?
Any idea what's torque spec for timing tensioner and all torque specs for that job ?
It’s all here in this video
where do you get all the stuff needed to rebuild? bolts gaskets etc?
eBay and local Honda
is safe to use honda bond on the threads of the bolts?
Depends on what bolts and it is safe if you torque them to spec. Anything more and you’re risking stripping them
Why you using honda bond instead a thread locker ?
Threadlocker was used where threadlocker was needed, Hondabond was used where Honda stated.
Balance shaft delete kit?
And an auto to manual timing belt tensioner would be nice.
8:35 why didnt you put the sleevе inside tensioners pulley? Is the engine ok? It will not work man...
Was there a belt install video
Camera died 🤦🏻♂️
what brand pistons and rods did you use?
Same rods, new oem pistons.
Nice Video where you get the music from?
Non copyright music I looked up.
@@lvigarage6108 can you please show me where to look please!!!???
Where is part 1 ?
Balance shafts are not needed. Free up about 5hp/3-4ftlbs and 1 or 2 mpg. Take your belt off.
Too much vibration without and prefer to keep things as oem as possible.
A harbor freight ratchet ewww🤮🤮🤮🤮🤮
It’s all I got man.. got her done tho 👍🏼
What's the link to that beeping torque wrench? Thanks!
Harbor freight lol used %20 off coupon too