How to Replace Windshield Washer Nozzle 2004-2015 Nissan Titan

Buy Now!
New Windshield Washer Nozzle from 1AAuto.com www.1aauto.com/*/i/NSWWX00004...
This video shows you how to install a windshield washer nozzle on your 2004-2015 Nissan Titan. Windshield washer nozzles may become clogged, or damaged, over time. If yours aren’t spraying the way they used to, they can be replaced.
This process should be similar on the following vehicles:
2004 Nissan Titan
2005 Nissan Titan
2006 Nissan Titan
2007 Nissan Titan
2008 Nissan Titan
2009 Nissan Titan
2010 Nissan Titan
2011 Nissan Titan
2012 Nissan Titan
2013 Nissan Titan
2014 Nissan Titan
2015 Nissan Titan
Tools you will need:
• Pocket Screwdriver
• 14mm Socket www.1aauto.com/*/i/1AXAA00015...
• Trim Tool Set www.1aauto.com/*/i/1AXXX00006...
• Needle nose pliers www.1aauto.com/*/i/1AXAA00051...
• Needle nose pliers www.1aauto.com/*/i/1AXAA00052...
• Drill
• Gloves www.1aauto.com/*/i/1AXSS00048...
• Safety Glasses www.1aauto.com/*/i/1AXAA00343...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@jontygers1]

Thanks! Nissan wanted $480 to replace just one.

[@bertchiu9265]

Thanks … I’m sure this is gonna apply to my 2005 Nissan Quest as well … probably saved me a couple hundred bucks at the dealer 😱

[@lordneeko]

Just followed this to the letter to replace mine in my 2014. Thanks!

[@robertmendoza7538]

Worked great thanks. If your clips are worn or broken you may be able to just pull through the top of the hood without any of these steps (very rare though). Only issue I had was my replacement nozzles I ordered online didn't fit as snug (a quick pull from top of hood they would disengage). I solved that problem with some plumbers tape around the squeeze pins/hook on the nozzle and its holding snug.

[@mknss9186]

nice job

[@Nobody-ql2mx]

Could sand and repaint the arm while you have it off.

[@johnnycanread9978]

Wow, you completely whiffed on how not being able get the cowling vertical, makes it next to impossible to access the nozzle retainer clips, to squeeze and remove it. Your video shows you have it detatched. I'm sure the manufacturers service department mechanics have a special tool or they charge more labor to completely remove the cowling in order to replace the nozzles. One could use large cutters since you're replacing the nozzles anyways. Thanks for the video though.