Columbia Drywall Automatic Taper - How To
Вставка
- Опубліковано 6 гру 2017
- This video will teach you, in detail, how to operate an Automatic Taper for drywall and taping your flats, ceilings, and corners. Please see Time Stamps below to skip ahead to spots in the video that will be more relevant for you.
A huge thank you to Phil of @PRCTAPING for his help in our How To Series videos! / prctaping
You can find us on Facebook and Instagram: @columbiatools
As always, if you enjoy our videos, please subscribe to be notified when we upload!
Time Stamps:
00:15 - Prep
01:18 - Putting the tape roll on
02:28 - Filling the Taper with mud
03:32 - Taping flats
03:42 - Priming the Taper
05:19 & 07:02 - Troubleshooting dry spots
05:48 - Troubleshooting double cutting
09:04 - Taping ceilings
10:45 - How to use the Creaser Wheel
11:14 - Taping Corners
12:48 - Taping Closets
13:02 - How to remove the Taper Cap
Can u guys could make a video on the correct way to clean a bazooka? That would be awesome!!!
Awesome tutorial guys! I've heard mixed opinions on this product lately. But after watching this I'm confident I'll put this tool to good use!! Much appreciated
Great tutorial. I second the cleaning video!!
Coming from a 30 year old tapetech, this tool is a really nice upgrade. Cuts easily, rolls straight. Nifty paper keeper rod design. However, the aluminum is very thin and soft, bends easily. Don't drop this tool.
The best vidéo!!!thanks
l apreciate your teachings
l must go with your company
What do think guys, is this one the best taping bazooka on the market? Lots of different brands out there, prices all over the place.
Nice
If u guys could make a video on how to properly clean your taper that would be awesome!!! Thx
I just got mine today, and I'm trying to learn as much as I can before I run it
Nothing difficult 😁
keep cleaning until it’s clean lol 😂
As simple as that 🤣🤣🤣
My advance pin is cutting. My tape and not advancing well
what wipedown knife is he using at 11:10 is that a custom job?
👍👍👍
Tip #1 . . . Should really lightly "V" the butt joints with a sharp utility knife and prefill them with setting compound.
Tip#2 . . . When done taping for the day, empty bazooka of most of the mud by manually turning the clutch, which winds the cable into the internal barrel, and advances the plunger up into the tube until the tube is mostly empty. Run clean water through your pump until it is clean. Then pump clean water into the bazooka until it is full. With the bazooka oriented so that the base is touching the ground ( or parallel over a couple of buckets), and the head is over an empty bucket, once again advance the plunger by turning the clutch, until the tube is mostly empty of water. Do this a couple of times. Then shake the head of the tube back and forth in a water bucket, and it will be clean internally. Clean the outside with a soft brush. And the internals of the open tube with a bathroom brush. Spray with light oil, and it's good to go.
Columbia plz I hv quetion we can use fiberglass mesh instead paper tape.
not with premixed mud, you have to use quick set mud with mesh tape or it will crack
@@propaintdrywall7177 in other words you have to use a strong durabond..
Hey Phil what's that wipe down knife. Kris from Alaska
that's what i wanna know
I can almost guarantee it's a marshal town
you want to use any soft 6 inch knife...
its a nela 8 inch ...... come on guys ......lol
Is the best vidéo Who explain how to use the applicator bazooka. What pity amercan is to difficult for me to understand.
👍👍👍