BMW 530i (E60) REAR BRAKES REPLACEMENT, SERVICE LIGHT RESET - DIY
Вставка
- Опубліковано 4 жов 2024
- As always, just a short DIY tutorial on how to change rear brake discs and pads on your BMW. This took about an hour per side, not a hard job to do in your drive way.
You will need:
discs and pads
new wear sensor
preferably new bolts, springs
copper grease, silicon grease
wire brush
brake cleaner spray
17mm socket for the lug bolts - 120 Nm torque
Hex 6mm for the set screw (dics to hub) - 16 Nm torque
Hex 7mm for the slide pins - 30 Nm torque
18mm socket for the carrier bolts - 67 Nm torque
torque wrench, normal wrench
bungee cord to hang the calipper
super solid floor jack - preferably jack stands
Careful: after replacing your brakes, you need to allow some time for everything to settle. It takes 100-200 km of light braking. Try to avoid hard braking.
Be careful when lifting the car up and working underneath it. It can kill you if you mess it up. I am NOT a professional, so do this at your own risk.
Take care and let me know if you have any questions.
Thank you!
Sure thing.
Simple thanks
Thank you.