Get your weight hangers from shapeways if hp are sold out👍🤠👍my vdub dementor is running the original 3d printed 1.8 wheel barrels. Super light with low blows all round. 4ws a must. Loaded hangers. More weight below the axle than above. Lightest brushless motor available the nano beast. Total weight 235grams 👍🤠👍another cool vid Ken....I need my own channel😔
Seems like a good option. I Donno if 4ws is a MUST. The outer diameter of the tire is still the same. So it’s actually not like it’s affecting steering. But yah, 4ws is a help.
Having bought all 3 major brands of "outlaw" wheels (HP, Akers, Mofo) and designed my own, I can say that they're all worthwhile investments in the performance of a dedicated rig - but if you're not going to use them on a dedicated, all-out crazy kind of build, your money may be better spent elsewhere. It's a big investment for incremental improvements in overall performance, something that really is only noticeable when your rig is already well tuned and set up properly. If you just throw these on a stock (or mostly stock) rig, you're going to have a bad time!
They also seem pointless if you don’t plan on running something like the Low Blow knuckles, and weight hangers. I haven’t completely dived in because the whole setup is quite an investment. I did grab a set of HP barrels while they were in stock though.
Just seeing this now but awesome video! It’s funny how you say that the wheels line exactly with the lettering. That’s how I came up with the size 1.8 and know everyone else who makes these just straight up copied lol. So glad chad (hardpark) helped and made the barrels and then started selling them. Had no idea they would get this big
@TheShopMiniRC even the way you mounted the tire was awesome! Easier to put the screws first. I am always fighting with putting the scews in one at a time after I have the tire on. Great video!
I was on their website and was not sure what i should order to get a complete set. 🤔 I want them on the CR18P Evo pro. Any chance of you emailing me a list?
you simply need to choose a face design, then a set of barrels, a hub (choose how much offset you want) and then your hardware. It's pretty simple. each item comes with a set of 4.
Those things are off the hook sick however when I go to the Web site it says they sell all the parts separately now and it adds up to over like $100 for all that parts am I doing it wrong I think I'm adding too many parts but I do know the centers are 50 and the ring are like 18 the you need hub 10 that's close to 80 and it's 10 bucks every little part is + $10 but I mean they are sweet I guess I've already spent welll over a grand on my tiny monster so for something that looks this cool and has a purpose what am I complaining about. These are the coolest rims on the 1/24 scale I've seen! I'm just not sure if they fit my rock hopper buggy look so I'll have to put them on my jeep
Outlaw 1.8 Wheel Barrels $14.99 Single Face Wheel Hardware $4.99 Standard Hubs - Raw $9.99 Carbon Fiber Outlaw Wheel Faces and Rings - Star $34.99 Subtotal $64.96 USD
Hey man. If i left every time ive heard you say it id be busy moving constantly man. Relax......dont ruin life surviving all the time. None of us are going to change this situation. God is in control.
Thanks!
Thank you!!!
Get your weight hangers from shapeways if hp are sold out👍🤠👍my vdub dementor is running the original 3d printed 1.8 wheel barrels. Super light with low blows all round. 4ws a must. Loaded hangers. More weight below the axle than above. Lightest brushless motor available the nano beast. Total weight 235grams 👍🤠👍another cool vid Ken....I need my own channel😔
Seems like a good option. I Donno if 4ws is a MUST. The outer diameter of the tire is still the same. So it’s actually not like it’s affecting steering. But yah, 4ws is a help.
Off the hook i love em!🎉🎉
I luv the deluxe one your made looks like a mini motorcycle tire awesome 👌
Hahah yeah, it kinda does.
I think there absolutely stellar ❤❤
They are amazing.
I’ve had a V2 Dementor for a while, going to finally explore the outlaw wheels paired with the low blow knuckles and hangers.
Nice! you are gonna love it!
Having bought all 3 major brands of "outlaw" wheels (HP, Akers, Mofo) and designed my own, I can say that they're all worthwhile investments in the performance of a dedicated rig - but if you're not going to use them on a dedicated, all-out crazy kind of build, your money may be better spent elsewhere. It's a big investment for incremental improvements in overall performance, something that really is only noticeable when your rig is already well tuned and set up properly. If you just throw these on a stock (or mostly stock) rig, you're going to have a bad time!
Correct, they are that extra 5% when you are already at 95%
They also seem pointless if you don’t plan on running something like the Low Blow knuckles, and weight hangers. I haven’t completely dived in because the whole setup is quite an investment. I did grab a set of HP barrels while they were in stock though.
@@KBRC81 I do think there is still a performance gain from just the wheels alone, but yes, the outlaw hangers will definitely make it worth it.
Just seeing this now but awesome video! It’s funny how you say that the wheels line exactly with the lettering. That’s how I came up with the size 1.8 and know everyone else who makes these just straight up copied lol. So glad chad (hardpark) helped and made the barrels and then started selling them. Had no idea they would get this big
Awesome!!! Glad you made them. Many love the 1.8s
Thank you! Big help! The exact video I needed!
Thanks a ton for watching good sir!!!
Inside out!? Genius!
Hahha. Thanks!
@TheShopMiniRC even the way you mounted the tire was awesome! Easier to put the screws first. I am always fighting with putting the scews in one at a time after I have the tire on. Great video!
Awesome super helpful thanks
Glad it helped!! Thanks a ton for watching.
Ordered mine yesterday
Nice!!!!!!!!!!! You're gonna love em!
Put a 1.88 on front and back and put your Hub on the back usual little bit wider of a stance
Yep!
I am still hoping for a video of that rig - that looks all stock parts - but quite different - really curious what you did with that.
When I get caught up, I will try to go over it in an overview video.
Just ordered some 1.4 eBay you can get them up to 20 mm long
Nice!!
Just a heads up, the barrels do not come with hubs. Everything needs to be added separately
Correct.
💪💯
Facts.
Awesome video, if my tires are 19mm w injora should I cut its width?
I would see if they work first.
Where did you get the role cage on your build that you are showing off the wheels on?
It’s basically deadbolt parts I chopped up.
I was on their website and was not sure what i should order to get a complete set. 🤔 I want them on the CR18P Evo pro. Any chance of you emailing me a list?
you simply need to choose a face design, then a set of barrels, a hub (choose how much offset you want) and then your hardware. It's pretty simple. each item comes with a set of 4.
@TheShopMiniRC Thank you.
@TheShopMiniRC I got em and have em all together and installed! Check em out and thank you for this video. 🙏
The outlaw wheels stay sold out u gotta get em super fast or ther gone😢
True. A very desired product.
Those things are off the hook sick however when I go to the Web site it says they sell all the parts separately now and it adds up to over like $100 for all that parts am I doing it wrong I think I'm adding too many parts but I do know the centers are 50 and the ring are like 18 the you need hub 10 that's close to 80 and it's 10 bucks every little part is + $10 but I mean they are sweet I guess I've already spent welll over a grand on my tiny monster so for something that looks this cool and has a purpose what am I complaining about. These are the coolest rims on the 1/24 scale I've seen! I'm just not sure if they fit my rock hopper buggy look so I'll have to put them on my jeep
Outlaw 1.8 Wheel Barrels $14.99
Single Face Wheel Hardware $4.99
Standard Hubs - Raw $9.99
Carbon Fiber Outlaw Wheel Faces and Rings - Star $34.99
Subtotal $64.96 USD
Hey man. If i left every time ive heard you say it id be busy moving constantly man. Relax......dont ruin life surviving all the time. None of us are going to change this situation. God is in control.
I’m not really sure what you are referring to me saying?
@TheShopMiniRC Whoa man, thats weird! I left this comment on another channels video a few days ago. Friggin weird crap right there!!
@@ADHDNME777 odd. Maybe a misclick?
What's the tire Diameter?
I thought I mentioned it in the video. these are the ogrc pin comps. they are on amazon:amzn.to/483VxDt
They are 63 * 21mm
Flip the wheels out and make them deep dish
Considered it. Would give a ton of scrub radius though.
@@TheShopMiniRC true
Nope
Yup
Haha. Function over form. Lol