Thanks. I swapped the console, but now I can't get my remote start to work and I plugged in the original responder that was under the jump seat. Any clues to help ?
@@djrekklessdmv8757I just bought a Autel scan tool and was able to program new remote was very easy once scan tool was set up with my vehicle vin info, for what the dealer charges u can buy tool and now you got something to always use. Hope this helps.
Would you know if this is doable the other way around? To remove my console on a 2016 Yukon and add a bench seat instead ? Since the radio and all is there 🥴
Is the arm rest part the same size on both? I have an Escalade center console and was wondering if I could take the top off and use it on a jump seat to match my interior better.
Do you have link or info on where to get the wireless charging harness? What about the ports inside the console ? Mine don’t work as well as wireless charging. Rears work but that’s all
I as well had service remote start but it went away shortly not sure about the check engine light I’m guessing you didn’t disconnect the negative from the battery ?
@@1800A I figured it out! I had to REMOVE THE TRANSMITTER FROM UNDER THE ORIGINAL JUMPSEAT. and plug it back into the truck. That's all you gotta do. Everything works perfectly now.
The harness that’s built into the console works the rear usb ports but the wireless charging harness is not included and has to be installed for workers charging to work
I’d suggest get the part# which is on the video and go to your local Chevy or gmc dealership to get it usually they have it or takes about 1 day to deliver.
NICE, i would also like to do this in the future.
Can you give me the part number of this center console?
You're better off buying it whole on fb marketplace or wrecking yard. Gm sells it by parts, not assembled.
Would this work on a 2022
Did you gain seat space? I feel like my bench seat pushes me over a bit when the seat back is down
do you happen to know if it works the other way? I want to remove my console and get a seat as we are six but not sure if it works
Yes it works
Nice job. Question. Did you have to do anything extra to get the Heating and A/C vents to work in the rear ?
Nope, it sits right on top of the vent where the bench seat sat and it works just as it should.
Thanks. I swapped the console, but now I can't get my remote start to work and I plugged in the original responder that was under the jump seat. Any clues to help ?
Your welcome. Did you disconnect the battery before installing ? that’s what I did and had no issues afterwards
No I didn't. I'll try that when I get home.
THANKS !
@@djrekklessdmv8757I just bought a Autel scan tool and was able to program new remote was very easy once scan tool was set up with my vehicle vin info, for what the dealer charges u can buy tool and now you got something to always use. Hope this helps.
Did you have to use any screws or just clipped everywhere perfectly?
Bolts that hold it down same bolts as the bench seat
What does a used console sell for?
$1400
How much for bench seat?
Did you order everything from GM with part # ? Or did u buy it second hand ?
Yes, I went to my local Gmc dealer
Would you know if this is doable the other way around? To remove my console on a 2016 Yukon and add a bench seat instead ? Since the radio and all is there 🥴
The Yukon has a different size center console compared to the sierras and it wound be doable
Is the arm rest part the same size on both? I have an Escalade center console and was wondering if I could take the top off and use it on a jump seat to match my interior better.
Bro did not show how to remove and install 💀
Because it’s common sense
Did the wireless charging and ports work ? Plug and play ?
Just the ports wireless charging needs an additional harness
Do you have link or info on where to get the wireless charging harness? What about the ports inside the console ? Mine don’t work as well as wireless charging. Rears work but that’s all
What’s the part number ?
I swapped mine out as well and now I have a check engine light and "service remote start" message. Can anyone help me out?
I as well had service remote start but it went away shortly not sure about the check engine light I’m guessing you didn’t disconnect the negative from the battery ?
@@1800A I figured it out!
I had to REMOVE THE TRANSMITTER FROM UNDER THE ORIGINAL JUMPSEAT. and plug it back into the truck. That's all you gotta do. Everything works perfectly now.
How did the wiring work to get the back usb c and wireless charging to work? Thanks
The harness that’s built into the console works the rear usb ports but the wireless charging harness is not included and has to be installed for workers charging to work
@@1800Adid you get the wireless charging harness?
@Alex-oy6wb no I haven’t yet but I plan to !
@@1800A can you make a video when you do?
Do you have a link for that trim part that goes on your dash?
I’d suggest get the part# which is on the video and go to your local Chevy or gmc dealership to get it usually they have it or takes about 1 day to deliver.
Where can i get it and how much is it and it will be fit to sieera 2500 hd 2020 ?!
I got it off Facebook marketplace
How much do u pay for console?
where did you source the console from?
I actually found it on FB Market
Are you selling the bench seat I’ll buy it
Did the phone charger work.?
You’ll need a certain harness for it to work
@@1800Adid you get the harness so it works?
How much you pay for it?
I got it off Facebook marketplace for $480