This video was very helpful. I installed the centramatics pretty easily but have a real difficulty putting back my hub caps on. What a pain. I did not want to use too much force and jam it in but dont want to leave it without the hubcap either. Any idea how i can get the hubcaps back on the rear wheels ? Removing was a pain too but putting it back i am still struggling with it. I did but some silicone spray to see if that will make it easier to put the hub cap back on but not sure if spraying that on the hub cap or the wheel lug nuts is safe and will help put this back ? Any ideas or suggestions welcome please.
Awesome video! This helped me in my question about the ability to mount the wheels with the valve stems 180 degrees apart and if that could be done. I plan on adding aftermarket TPMS with stem mounted sensors so having them at 180 degrees would be better. Do you have any air chuck clearance problems with the Centrmatics after they were installed? Also I noticed that you did not remove the existing wheel weights from the inside dually. I thought this was recommended prior to installing balancing rings? I certainly want to get rid of the ugly exposed weights on the aluminum wheels.
I removed the factory extension caps and put on regular caps to make it a little easier. I called Centramatics before installing and she reccommended me keeping the weights on but you could try and take them off and see what happened.
2 LB Slide Hammer From Harbor Freight Check Out This New Video I Uploaded Demonstrating It. ua-cam.com/video/icYSinjb-YQ/v-deo.html And be sure to subscribe to keep up to date with all our new videos.
Much appreciated!
This video was very helpful. I installed the centramatics pretty easily but have a real difficulty putting back my hub caps on. What a pain. I did not want to use too much force and jam it in but dont want to leave it without the hubcap either. Any idea how i can get the hubcaps back on the rear wheels ? Removing was a pain too but putting it back i am still struggling with it.
I did but some silicone spray to see if that will make it easier to put the hub cap back on but not sure if spraying that on the hub cap or the wheel lug nuts is safe and will help put this back ? Any ideas or suggestions welcome please.
My 20 platinum 350 srw xhas that same problem.
Awesome video! This helped me in my question about the ability to mount the wheels with the valve stems 180 degrees apart and if that could be done. I plan on adding aftermarket TPMS with stem mounted sensors so having them at 180 degrees would be better. Do you have any air chuck clearance problems with the Centrmatics after they were installed? Also I noticed that you did not remove the existing wheel weights from the inside dually. I thought this was recommended prior to installing balancing rings? I certainly want to get rid of the ugly exposed weights on the aluminum wheels.
I removed the factory extension caps and put on regular caps to make it a little easier. I called Centramatics before installing and she reccommended me keeping the weights on but you could try and take them off and see what happened.
How are thy doing I wanna put some on my truck I’m having problems keeping them balance
I have had them on for about 4,000 miles and they are still doing great, even in winter.
Hi you posted the video earlier
Hi Maddison
Do you have to remove the weights on the wheels?
No. I called centramatics and they reccomend keeping them on
What tool did you use to remove the center cap?
2 LB Slide Hammer From Harbor Freight Check Out This New Video I Uploaded Demonstrating It. ua-cam.com/video/icYSinjb-YQ/v-deo.html And be sure to subscribe to keep up to date with all our new videos.
Centramatic suck