Fourth Gen Toyota 4Runner Rear Hatch Light Installation
Вставка
- Опубліковано 30 січ 2025
- I apologize for the length of this video. Unfortunately, when Toyota designed the 4th gen 4Runner they did away with the convenient bladed electrical terminals that came on the third generation 4Runner's dome lamps. So without a more detailed instructional I was worried some of you would get lost if I just left it at "plug into the dome lamp circuit."
Depending on the strength of the adhesive that comes with the LEDs you select, the clear plastic clamps may not be needed.
The hole for the switch is easy to cut, I covered the top of my rear plastic cover with a piece of blue painters tape, placed my switch on it's side and marked the length of the switch with a pen, then marked the width. I drilled out the corners of the hole with a 1/16th bit and then cut the sides with a dremel. Removing any excess material with a razor blade style skill knife and side cutters. Alternatively you can install your lights and see if they come on when you open your vehicle, which is why I installed the switch (every time I unlocked and opened my 4Runner they would come on), if they don't and they only come on when you need them then don't install the switch.
This is a handy little mod and easy to install. I hope you enjoy it and find is as useful as I have.
Parts List:
Alpena Aqualitz MultiGloz (new and updated without the remote and with a different control interface, unfortunately)
www.walmart.co...
Clear LED clamps:
100Pcs Silver LED Strip Light Clips Light Fixture Mounting Bracket Clips One Side LED, Outside Rope Light Hangers for 10 mm Wide Non Waterproof LED Strip Lights,Wall Lights,Lighting Ceiling Fans a.co/d/fNU29oR
Mini Electrical switch:
QTEATAK 5Pcs On/Off Boat Rocker Switch 5Pcs 2 Pin 2 Position Snap 12V 110V 250V a.co/d/fIWCiIl - Розваги