How I Control my Pedals and Amp (Using the Boss ES-5, Midi and the 4 Cable Method)
Вставка
- Опубліковано 1 лип 2024
- Follow me on Instagram @wrashchild
Listen to music on Spotify and Apple Music.
spoti.fi/3Ilqkyw
apple.co/3s1SIyM
Time stamps
0:00 Intro
4:15 What is a Loop Switcher?
6:21 What is Midi?
7:38 My Pedalboard
10:27 Pedals In Loops
10:57 4 Cable Method
12:44 Signal Chain on the ES-5
16:02 Rockboard Mod 2
17:14 Midi Box
18:49 Demonstration
22:12 Amp Channel
22:51 Wrap Up
ES-8/ ES-5 Facebook Group
groups/bosse...
Featured Pedalboards
Jason Snowball
As Yan
Rob Reid
Thiago Amorim
AJ Dunning
I think you've made the best guide about switching/looping/midi stering. Well done !
This was really helpful. Thank you!
Thanks for the video - super helpful.
Thanks mate! Needed this rundown.
For amp with different channels a very nice addition to es-5 is a voodoo lab control switcher, that can transform any amp and add midi control rather via a custom made cable (midi DIN5 to Marshall DIN 6, to Mesa DIN7) or via four 1/4 standard mono jack outputs. Very nice unit check it out ;)
totally agree with this. I have a 3ch JSx and the voodoo control switcher simplifies things for sure.
You just answered all the questions i was about to ask. This is bloody brilliant
it's really informative! Thanks a lot.
Thank you man for this fantastic, complex explanation 💥💯💫. It's a great video. Many greetings from Bavaria,Germany
Glad to help! I recommend the Facebook group if you have any other questions. ES-5/8.
Thx great vid!
Great Video.... good tips. thanks for share!
Hopefully helpful to some.
Ashley !!!! Jon here ! Great Video !! Love it !! Well Done !!!!!!
Thanks Jon! Especially to you and Eggy in the ES Facebook group.
@@wrashchild ❤
this is awesome - it looks like you have cables running in and out of the fx loop of the empress buffer. where does that fit into your chain?
Hi Mike. Hopefully it some help to you.
The buffer is for input and output. So in my setup, the output is technically the Effects loop return of the amp. So the output buffer goes there. And the input is right at the start.
You have the best video on the es5 4 cable method . I have a eventide h9 that will always stay in the loop so you your saying if I use the 4 cable method I can just run it into the output of the es5 so I don’t have to waste a loop on the es5 ?
Yes Daniel! Remember that the point of the loops is so that you can turn on multiple pedals at once without having to tap dance.
So if you have a pedal, such as the H9 that can be controlled by midi, that also is always in the front of the amp, or the effects loop, you don’t need to use a loop. Just keep it there and turn it on and off through midi. It just depends on if you ever need it to be before or after something.
That sounds great! And all in mono?
Yes! All mono.
Great video! Question about using the Kenton with all the midi pedals. Do you have the Kenton on your board or is it off the board? Just to confirm, you can add any of the midi effects running through the Kenton into a patch? Is it the same process for setting up a patch with just one midi pedal? Can you run stereo using the ES-5? I am running into to amp modeler pedals (e.g. iridium) since the sound engineer doesn't want amps on stage. I haven't purchased a switcher yet. Still doing research.
Hi! The Kenton is attached underneath the board. Yes. ES-5 Midi Out goes to the Kenton. Then I attached all the midi pedals to that. Some are daisy chained. It doesn’t matter as long as each midi pedal has its one channel it’s fine.
As for Iridium. I don’t have experience with it so I can’t confidently answer. Stereo is possible with it but it’s a bit of a headache. For more info I recommend the Facebook group for ES-8/5
Very detailed video, thank you! But what if i use an amp head from the 90's with no midi and just the traditional jack for the footswitch?
It depends. I’ve seen some maps work fine using the control in. What amp do you have?
@@wrashchild I have a marshall valvestate 8100, it works sometimes even with other footswitches (now i'm usinge one from koch) so maybe...
Not sure if you're still around but your boss es5 vids are fantastic. I'm a little confused on the Empress buffer cabling. Once you connect GTR to GTR in, which output on the buffer connects to the ES5 input? Similarly, which is used for buffering the output from the ES5?
So on the Buffer + the Guitar In and Amp out are connected but they’re both in the right side. I can see why it’s confusing. Guitar > buffer guitar in > amp out
Then use the loop input/output from the ES-5 output.
Thanks for the reply. I think what also makes it confusing is I use the 4CM so the Vol Send goes to my amp input and the es8 (in my case) goes to the fx loop return. So for me, if I'm looking to replace the es8 input and output buffers, the send on the empress would go to es8 input, the return on the empress would be the output of the es8, then amp out goes to fx return. Otherwise I'd need to put the output buffer on the send vol which goes to the regular amp input. I guess it could be a matter of experimenting to see what sounds best.
I have a free the tone to . So when doing the 4 cable method like you the output of the boss goes into the input or output of the free the tone ?
Yes Daniel! So from the Ed-5 Output, into the Future Factory, and then into the Return of your amp.
Hi! I have noises (POP) when I change patches.Could it be an external buffer?Any suggestions? Thanks
Hey! Actually I’d go to the Facebook group for Boss ES-8/5 and ask there. I’ve never had experience with that but I’m positive someone can help there.
So is this unit capable of taking my old school effects pedals that don't have midi and allow to use them in the FX loop but also bring in midi sounds from my computer such as Eventide plug in and hear not only the guitar and the pedals but also hear the eventide plug in from my DAW all in my amp? Or would I need some other sort of interface to get all of those pedals and the eventide plug in to go into my amp to play live?
I’ve never experimented with plugins and pedals together. I recommend joining the ES-8 Facebook group and asking there. 100% sure someone could help you.
I finally got mine working I’m using the 3rd loop for my amps fx loop like yours but when I engage loop 4 I get volume loss then if I engage loop 5 I get even more volume loss but I don’t get it on the first 2 loops that are before the the fx loop any suggestions ?
Hi mate. So firstly I would double check a cable. That’s usually the culprit. Also, are you using an external buffer?
Sometimes that has been know to cause issues.
Hi, i got the 100w versión of the 5150 and i dont have midi, can you recommend some amp midi controllers ? Because there is not much information out there and there is not much videos en YT talking about it 😢
Hey! I’m not actually sure but there is a company that make special cables. BTPA.com. You can email them and they will help you out.
Hi, I noticed you also use a ISP decimator II G string, can I use 4 cable method noise gate with this switcher 4 Cable method ? Thanks
Yes. I’m using the 4 cable method here.
Is it possible to use a loop switcher with only modulation pedals through the effects loop and not connect any of the front end pedals?
Yes. I’m basically doing that in this video. Just save one loop to act as the FX loop and put the modulation pedals behind that.
what effects are active at 22:42? synth flange reverb?
That is the Boss SY-200, Mobius Auto Swell and Reverb.
What cables are you using to connect to the back of the es5?
EBS flat patch cables
@@wrashchildthank you
You must’ve spent about 700 quid on cables alone 🤣
I would have but luckily learned to make my own. Plus a few EBS flat patches 😂
The Quad Cortex, Kempers , etc... don't sound as good as a real amp.
I agree, I am huge fan of "real" amps would always pick them over DSP but I love my Kemper it has helped everytime can't imagine my live show without it, don't know what would be handed over to me by tech vendor, it's my saviour
Sorry but that background audiobed is disgraceful.
Yeah it is a bit loud. Live and learn.
@@wrashchild ;)
Great video man! I want to do the same setup, but is it possible to put the OD in front of the Noise gate (4CM)? I'm going to buy the ES-5 this Thursday so I hope you can help me. Thanks!
Do you want the OD to be in a loop? Because if not you can just place it before the input of the ES-5 and it will be 100% before it .
@@wrashchild I just want the od in front of the noise gate while my noise gate is in 4cm. GTR > OD > Noise Gate 4CM.
@@wrashchild if I put it before the input of the ES-5, is there a way I can turn it on and off using the switcher? I'm really sorry this is my first time so, things are new.