Uniforest Winch Set Up and mounting to a PTO on a Tractor - Hud-Son Forest Equipment BEST WINCH!

Поділитися
Вставка
  • Опубліковано 10 січ 2025

КОМЕНТАРІ • 76

  • @curtterrano3360
    @curtterrano3360 2 місяці тому +1

    Great job on showing me how to set up PTO in person.
    I'll have many yrs of pulling logs thanks for taking the time to go over my M35.
    Curt

  • @bernhard5741
    @bernhard5741 Рік тому +5

    Just picked up a 45 M winch after researching all the different makes and models. Since there are no dealers in my area within reasonable driving distance, this video was the deciding factor to get the Hudson/Uniforest winch. This video was very well presented and provided an excellent, detailed overview of the setup and operation. The build quality and fit and finish are very good. Also, the winch turned out to be heavier and stouter than appears in the video.

    • @DanHudon
      @DanHudon  Рік тому

      Thank you very much for the wonderful review!!! Very happy to hear you are pleased with your Hud-Son Forest Equipment Uniforest skidding winch. We truly appreciate your business!

  • @TKCL
    @TKCL Рік тому +1

    Great looking equipment! Hurricane Idalia has put so many trees down here in Florida I'm considering one of these to help get trees out of the woods.

    • @DanHudon
      @DanHudon  Рік тому

      Sorry to hear about the damage from the storm. Hopefully just down tree and no damage to your structure. Yes, these Hud-Son Forest Equipment Uniforest winches/grapples are very handy for storm recovery. If you have any questions, please give us a call at 800-765-7297. We will be praying for all of you in Florida effected by these powerful storms.

    • @TKCL
      @TKCL Рік тому

      @@DanHudon thank you, a lot of people lost a lot. We are blessed with our health and our home still standing.

  • @carlosjoelgarcia3200
    @carlosjoelgarcia3200 2 роки тому +5

    Heck of a Lesson. Thank you for this video. Covered lots of basic safety rules, well explained and great for beginners like myself. Really appreciate your content.

    • @DanHudon
      @DanHudon  Рік тому +1

      Thank you for taking the time to post. Really enjoyed reading your comment!

  • @brookslindamood8837
    @brookslindamood8837 3 роки тому +3

    Great job! Anyone that owns one of these winches should, must watch this video. It will save the quessing and very possible save your winch.

    • @DanHudon
      @DanHudon  Рік тому

      We agree it is a must watch!! Thank you for watching and commenting on the video!!

  • @treetopflyersofva2
    @treetopflyersofva2 3 роки тому +2

    Bought a 45H from Hudson several years ago and I love it. It’s an awesome piece of logging equipment. The remote makes it easier to use when away from the tractor.

    • @DanHudon
      @DanHudon  Рік тому

      The remote is very handy and well liked by our customers! Thank you for your business and it is great to hear that you love your Hud-Son Forest Equipment Uniforest 45H skidding forestry winch!

  • @rogeririck8455
    @rogeririck8455 10 місяців тому +1

    After using a great deal the winch is still working fine, pulling logs, tree felling, move buildings, a great piece of equipment for a small operation.

    • @DanHudon
      @DanHudon  8 місяців тому

      Awesome to hear! Thank you for your business. We really appreciate it!

  • @jburch1544
    @jburch1544 2 роки тому +1

    Good video, this guy actually has used this equipment and understands it.

    • @DanHudon
      @DanHudon  Рік тому

      John sure does!! Thank you for your post!

  • @dougdinsmore9751
    @dougdinsmore9751 3 роки тому +1

    Thank you John for taking the time to put this video together. The owner's manual leaves a lot to be desired. When it becomes necessary I will now know how to adjust the clutch without trying to decipher the manual. I took the PTO cone and plate off in order to reach the drive chain away from the clutch, and lightly oiled it with Lucas non-sling chain lube. The winch is working fine, hope I don't start having problems with slippage.

    • @DanHudon
      @DanHudon  Рік тому

      Will share this message with John! Appreciate your post! Which winch do you have?

    • @dougdinsmore9751
      @dougdinsmore9751 Рік тому +1

      @@DanHudon I purchased the 35M.

    • @DanHudon
      @DanHudon  Рік тому

      @@dougdinsmore9751 Great choice!!! Hope you are enjoying it!

  • @pineridgefarm
    @pineridgefarm 2 роки тому +1

    Great video, especially the PTO shaft modification portion. Have a 35M for about 2 years now. Love it. Thanks again

    • @DanHudon
      @DanHudon  Рік тому

      Thank you! Glad to hear you love your 35M. Great little winch you got there!

  • @pohbor5788
    @pohbor5788 3 роки тому +1

    Thanks for the video!!!! Have had one for about 2 years now and love it. Hard to imagine not having it to be honest. Good to see that I was using it right, as the instructions sent with it aren't much.

    • @DanHudon
      @DanHudon  Рік тому

      Great to hear that you like this video!!! Thank you for taking the time to comment!

  • @ericford6539
    @ericford6539 3 роки тому +1

    Thank you for the much needed video. The manual is lacking at best. Great product!

    • @DanHudon
      @DanHudon  Рік тому

      Thank you for the kind comment. Glad that you enjoyed watching it. We appreciate your business!

  • @rogeririck8455
    @rogeririck8455 2 роки тому +1

    Good information, as I have the 55m and it is a great piece of equipment. I would recommend it to anyone who works by themselves.

    • @DanHudon
      @DanHudon  Рік тому

      Glad to hear that you like your Hud-Son Forest Equipment Uniforest 55M forestry logging winch. Would love to see pics or a video of you working in the woods with it if you ever get time. We appreciate your business!

  • @jrsgrounded
    @jrsgrounded 2 роки тому +1

    I purchased a 45M two years ago from my Hudson dealer in Pell City, Alabama. Its been a real workhorse and I enjoy using it. Thank you for making this much needed video as I too found the manual rather lacking. It states the chain tension should be adjusted if needed after the first 10 hours of operation but is not clear on the procedure. It would really be great if you could make another demonstrating how to check and adjust it. Thanks for your help.

    • @DanHudon
      @DanHudon  Рік тому

      We agree that it is a great little work horse! Thank you for your business and post on this video!

  • @teosinghsyiem9426
    @teosinghsyiem9426 Рік тому

    thank you Sir. its a very detailed explanation -essential for beginners or professionals.

  • @digger413
    @digger413 2 місяці тому

    Very informative video thank you

  • @southernadirondackoutdoors
    @southernadirondackoutdoors 2 роки тому +1

    Great Video, wish it was out when I got the 35M, would have saved me from having to replace (actually you guys replaced it) the cable! You are 100% correct about the manual...Uniforest should use this video instead of the manual!

    • @DanHudon
      @DanHudon  Рік тому

      Thank you for your comment. We are constantly listening to our equipment owners on what kind of videos they would like to see. This was made from requests from our customers. We appreciate your business of the Hud-Son Forest Equipment Uniforest 35M logging forestry winch!

  • @andrewslagle1974
    @andrewslagle1974 3 роки тому +1

    Great video ,well done. I learned a few things thank you!

    • @DanHudon
      @DanHudon  Рік тому

      We are always learning here too!! Thank you for posting on this video!

  • @marvinbeiler4566
    @marvinbeiler4566 2 роки тому +1

    Great video. I spoke with you at Booneville last month. May be reaching out to you soon

    • @DanHudon
      @DanHudon  Рік тому

      Look forward to hearing from you or seeing you up in Boonville again this year! Woodmen's is right around the corner!

  • @redfieldal22
    @redfieldal22 Рік тому

    Excellent video very detailed- thank you

  • @ToniLeupold-GelebtesHandwerk
    @ToniLeupold-GelebtesHandwerk Місяць тому

    amazing Video !

  • @shadecustomsawing
    @shadecustomsawing Рік тому +1

    Do you have any tips or videos of maintenance if the brake does not release when the clutch rope is pulled?

    • @JohnMcNerney
      @JohnMcNerney 7 місяців тому

      Would love to see info on that as well. My winch is an older model 35E (predecessor to the 35M) the brake linkage is a bit different. Would love to see some guidance on adjusting and maintaining it.

  • @garny3766
    @garny3766 2 роки тому +3

    Few things…
    1) when reassembling the driveshaft make sure yokes are phased correctly. Some shafts only go together one way some do not.
    2) lift winch up and down slowly while observing telescoping of pto shaft. Some tractor 3 point geometry shortens shaft while lifting or swinging sideways.
    3) hitch is dumb in my opinion. Why not make it a 2” receiver. Not everyone is pulling a pintle hitch log trailer. I made a 2” adapter to use 2” receiver hitches
    4) if you have the wireless remote make sure electrical connection is made for US tractor electrical trailer connect.

    • @JohnMcNerney
      @JohnMcNerney 7 місяців тому

      The supplied hitch did not work for me at all. I fabricated a receiver hitch to mount in the same spot on my winch. It works well.

  • @dorianmarban3752
    @dorianmarban3752 2 роки тому +1

    Great video!

  • @wayneweis653
    @wayneweis653 10 місяців тому +1

    Excellent presentation.

    • @DanHudon
      @DanHudon  8 місяців тому

      Thank you! I will pass this along to John who made the video. Appreciate your feedback!

  • @Twindadx2_
    @Twindadx2_ 2 роки тому +1

    Very informative video! Been skidding for a few years with mine and it makes quite the difference in a small scale operation. In the video, you were describing the device at the end of the cable (Wedge lock cable holder). Do you have any more information on it or where it can be purchased? I frayed the end of my cable and eventually broke it as we have a ton of rock on our property. Would be great to have as a backup. I am in Ontario Canada.

    • @DanHudon
      @DanHudon  Рік тому +1

      We would be happy to take an order from you. Please give us a call at 800-765-7297. We appreciate your post!

  • @chrissanford8467
    @chrissanford8467 2 роки тому +1

    I have 35 acres of about 7 year old Loblolly pines in the western Florida panhandle in very sandy (soft) soil. Trunks currently vary from 2' to 6". The time is fast approaching when I'll have to thin out these trees. Unfortunately they were planted in a very haphazard fashion (planters must have been enjoying very liquid lunches) leaving no room to drive our tractor (Kubota L6060 Grandcab) through without severely scratching it up and/or breaking glass. I have a small front loader mounted Tree Puller which works OK on trees up to max 4" but struggles with anything larger. I have wondered whether one of your tree skidder winches (with sufficient pulling power) may be used to thin a path through our trees just by pulling them out of the ground. The tallest are around 20' high. One of the problems I've been having with the Tree Puller is the jaws cut into the trunks and the backwards/forwards motion, sometimes necessary to loosen the roots from the soil and pull the tree, slices the smaller ones in two. The tree skidder would be used for literally wrenching young pines out of the ground to create trails wide enough for the tractor to pass through to bush hog very thick Yupon Holly and other tall unwanted shrubbery.

    • @DanHudon
      @DanHudon  Рік тому

      We would be happy to talk to you about this! Give us a call whenever you are free 800-765-7297. Would love to have another one of our winches in Flordia!

  • @FYMM69
    @FYMM69 2 роки тому +1

    Excellent instructional and good looking winch. I’ve been seriously considering a wallenstein being I’m up here in Canada but I’ll definitely take a look at your website
    Do you ship to Canada ?? Thanks again

    • @DanHudon
      @DanHudon  Рік тому +1

      We sure do ship to Canada! We do have some dealers in Canada as well. I will include the dealer link below. Thank you for looking at Hud-Son Forest Equipment Uniforest forestry logging winches! www.hud-son.com/dealers/

  • @york806
    @york806 3 роки тому +1

    Good demo...

    • @DanHudon
      @DanHudon  Рік тому

      Thank you very much. Appreciate the kind comment!

  • @lenhilger1876
    @lenhilger1876 3 роки тому +1

    Great job thanks!!

    • @DanHudon
      @DanHudon  Рік тому

      Thank you, Len! We miss you!

  • @danielbrown8602
    @danielbrown8602 Рік тому

    Just purchased the 45M. Hooked it up last night.
    The trees around here are no longer safe.

  • @Supercruiser66
    @Supercruiser66 10 місяців тому

    Nice video but my Uniforest won't pull half what my Farmi used to do (even though they are rated about the same)

    • @DanHudon
      @DanHudon  10 місяців тому

      What size HP tractor do you have and what model winch do you have?

    • @Supercruiser66
      @Supercruiser66 10 місяців тому

      35M and tractor 60hp

    • @JohnMcNerney
      @JohnMcNerney 7 місяців тому

      Then your winch is most likely not adjusted properly, or the clutch is glazed. I've used my Uniforest 35E (predecessor to the 35M) and a Farmi 351. Pulling specs are the same, and in actual use they pull the same.

  • @jamestiller6125
    @jamestiller6125 3 роки тому +1

    How muchach ezzz ett? Please!

    • @DanHudon
      @DanHudon  Рік тому

      Would be happy to talk to you about pricing. Give us a call at Hud-Son Forest Equipment 800-765-7297

  • @timothydecent4486
    @timothydecent4486 3 роки тому +1

    The one thing you did not cover in this this video you did not mention anything about the price of the skider what do they generally run and what’s the maximum weight they can skid The one thing you did not cover in this this video you did not mention anything about the price of the skider what do they generally run and what’s the maximum weight they can skid

    • @DanHudon
      @DanHudon  Рік тому

      Thank you for your post. We do not add pricing in the videos as pricing changes and than we do not have to redo the video. Would be happy to talk to you about current pricing! 800-765-7297. Have a great day!

  • @mr.redneck2715
    @mr.redneck2715 10 місяців тому

    I would love to buy a Hudson but you’re a little pricy!

    • @JohnMcNerney
      @JohnMcNerney 7 місяців тому

      One of the reasons I ended up with the Uniforest winch is because it was less expensive than the alternative brands available in my area. None of the brands are cheap, but if you do any significant amount of work in the woods, once you own one, you'll wonder how you ever got by without it.

  • @robertnorris3036
    @robertnorris3036 Рік тому +1

    This is the video I wish my winch producer @krpan6273 made. Very similar design to the Krpan. So much information in here missing from the manual. Wish I'd watched this video first. Thank you!