Got my bit Kyle, it seems they ship them right out. Some stickers and other goodies in there too. It works terrific, Keep the RPM low in a Foredom and it cuts perfect clean eyes with no burning, spin her up and it self darkens. While experimenting I discovered the edge makes a great fine-line tool as well, for eyelashes, hair etc. Go slow and use light pressure and it cuts a nice fine line without digging in. You're right about being careful, they get get ripping hot after only a couple cuts. No matter, I usually don't carve critters with more than 2 eyes.... They work so well that now I'm sorry I didn't spring for both sizes. I'm hoping they come out with some smaller sizes for us small(er) figure carvers. If not I may have to have a go at making some small ones myself. Another winner from Sabretooth , thanks for the tip!
I love all my Saburrtooth stuff. Have a fair number of bits, and a couple of buzzouts in 3/4. Love them all. Wood movers par excellance! They're such a joy to use, I find myself making up a reason to put a Buzzout or 2 x 1/4" saw in the old Foredom TX Squaredrive. I ordered a 1/2" Cross Cutter with your discount code and I DIDN'T get the 10% off.... I GOT 10 BUCKS OFF!!! Awesome deal ! Thanks Kyle! -- (and Saburrtooth)
Im from Romania and my biax is wuth 6 mm shank. What measurw fits by us standard measure. They reply its not goid the 1/4". Witch one us good then close to it
Saburrtooth offers shanks in 6mm and 3mm pout the 1/8 and 1/4 shaft . Got to Saburrtooth.com also used code HALL10 till the end February for a discount
The burrs ? Last a while if properly taken care of . The bears can burn for a while depending on side and how dry the wood is . I do t recommend burning the bears if they have a finish on them .👍🏻😉😁
Thanks for the info , This is just the ticket I wa slooking for
You’re welcome! Use code HALL10 @saburrtooth.com for a discount!
Kyle, saburtooth have come up with another great tool👌. Someday i shall also buy 😊thanks for the demonstration.
Got my bit Kyle, it seems they ship them right out. Some stickers and other goodies in there too.
It works terrific, Keep the RPM low in a Foredom and it cuts perfect clean eyes with no burning, spin her up and it self darkens. While experimenting I discovered the edge makes a great fine-line tool as well, for eyelashes, hair etc. Go slow and use light pressure and it cuts a nice fine line without digging in.
You're right about being careful, they get get ripping hot after only a couple cuts. No matter, I usually don't carve critters with more than 2 eyes....
They work so well that now I'm sorry I didn't spring for both sizes. I'm hoping they come out with some smaller sizes for us small(er) figure carvers. If not I may have to have a go at making some small ones myself.
Another winner from Sabretooth , thanks for the tip!
Thanks for the comment Scott . Saburrtooth did just release a 1/4 shaft 1/4 cut cross cutters
@@KyleHallwoodworker Thanks for the info, Just placed an order. Pricey buggers, but worth it in the long run I think.
They are pricey but I believe they are worth it .
I love all my Saburrtooth stuff. Have a fair number of bits, and a couple of buzzouts in 3/4. Love them all. Wood movers par excellance! They're such a joy to use, I find myself making up a reason to put a Buzzout or 2 x 1/4" saw in the old Foredom TX Squaredrive.
I ordered a 1/2" Cross Cutter with your discount code and I DIDN'T get the 10% off....
I GOT 10 BUCKS OFF!!! Awesome deal ! Thanks Kyle! -- (and Saburrtooth)
Awesome!! I like the burrs a lot
Im from Romania and my biax is wuth 6 mm shank. What measurw fits by us standard measure. They reply its not goid the 1/4". Witch one us good then close to it
@@moldcatalin go to Saburrtooth.com they offer 3mm and 6mm shanked burrs
Looks like they work good. Any tool that makes the job easier is a good tool.
Absolutely
Nice it’s easier to see without the shadow. Great video
Amazing tool 👍
Hy. I need the bits from sabuur but my biax is 6 mm shank.what measure can fit?
The reply for 1/4" is not fit.
Im from Romania.
Saburrtooth offers shanks in 6mm and 3mm pout the 1/8 and 1/4 shaft . Got to Saburrtooth.com also used code HALL10 till the end February for a discount
How long do these bears burn for?
The burrs ? Last a while if properly taken care of . The bears can burn for a while depending on side and how dry the wood is . I do t recommend burning the bears if they have a finish on them .👍🏻😉😁
So how quick are these quick selling Bears greatest flying off the shelf
They sell ok . Craft fairs are the best spot . Cheap and easy to carry, people like that .
Cheers for the u-date ,,maybe one day they will sell them in uk 😿
They will be available to our international distributors very soon, in the next 2 weeks. Check in with your favorite supplier for more details.