Це відео не доступне.
Перепрошуємо.
Fusion 360 | How many ways?
Вставка
- Опубліковано 6 сер 2024
- Let's explore a few different ways of modelling this.
Link to Reddit post:
/ how_would_you_design_t...
Link to starting file:
a360.co/3TNoXBi
If you have found this video useful and would like to support me, you can buy me a coffee at
www.buymeacoffee.com/fusion36...
or you can also support me on Patreon at
www.patreon.com/fusion360scho...
Disclosure: Autodesk has kindly sponsored the full version of Fusion 360 that is used to produce the videos on this channel. That being said, Autodesk has no editorial control over the content on this channel. I am still an independent creator with the aim of creating videos that help viewers in using Fusion 360. These videos are not meant to promote Fusion 360 as a product.
#fusion360school
0:00 Intro
0:21 Shell method
3:40 Offset face method
6:50 Surface patchwork method
10:20 Sweep method
If you try to thicken the sweep, you would run into problems. I had wrongly assumed that it would work. I really should have done the due diligence in testing it out before making the video. Sorry about this.
Since then, I have been trying to adjust the sweep profile such that the thicken would work. It was not as simple as I thought! The thicken function does not play well with certain curvatures. Do try to adjust the profile yourself and let me know your results!
Would be great to make YT membership of your channel. I would definitely become member :-) ❤
As a workaround for the failed thickening I could create two surface bodies from sweeping two segments and thicken them individually, then combine. However sweeping in one step and cutting the swept surface in separate bodies didn't achieve the same result. Awesome channel btw, by far my favourite fusion tutorials.
@@lonikur_ Interesting. How did you delineate the two sweep segments? After thickening each segment individually, was there any mismatch?
@@Fusion360School I rechecked and found one difference to your example: Your sketchplane for the sweep-profile intersects through the middle of a segment of the Path. I created the profile for the sweep on a construction plane at the end of one of the path segments. That way you can use the same profile for sweeping two halves of the path. There is no interference/gap for the resulting thickened objects. Hope that explanation helps
@@lonikur_ The sketch plane intersecting a segment does seem to be a problem. In the end, I got it to work by splitting the segment, sweeping one half, thickening and then mirroring. But it is not smooth along the mirror plane. I should try a profile at the end of one of the segments like you suggested.
I always learn new design approaches with your "how many ways" videos. Thank you.
Your case studies are the best for understanding Fusion 360 ❤
Every time you start with how to model this I'm lost and you come up with such an easy way of doing it! Awesome!
No better fusion 360 lessons than these.
Thank you for "over thinking" your modelling. I for one benefit from the different perspectives.
Indeed, my initial thought was to sweep this model and we now know that was under thinking. 😂
Excellent video, showing various strategies! Thank you.
Excellent lesson....learning a lot always!!!
This is how CAD instructional videos shall be made!
Muito bom
lol, that was my reddit post asking for the tip 😄
And I provided the response with surface sweeps. What a small world 😂
@@kkosciusz When I attempted to thicken my sweep, it actually failed. I downloaded your file from your reddit response. Your approach was very interesting. I was pleasantly surprised that the ruled face actually rounded itself at the four corners! Also, your profile was drawn on the side. I should try doing that too.
Thank you for the inspiration!
thx!!!!
I was thinking for the sweep to use the original sketch profile and sweep a rectangle or the non-filleted cross-section along the arc
That is certainly one way to create the main block instead of using the thin extrude.
Comment for the algo
i created a U shaped profile perpendicular to the line and arc, and use swipe, than with cut on offset plane shape made the hole
Sounds workable. With this method, how would you achieve the rounded ends?
Great video. While watching it i thought of a problem i had. Is there a clever way to design grips? I talking about tool, drill or weapon's grips. The only way i found (after watching hull modeling tutorials) is making a lot of sketches and then lofting it in some devious ways. Only to later found out that is was not comfortable at all. So is there a way i design them at least conveniently or moreover a way to make them easily adjustable. My model also looked weird(the light was rendering badly?) - i dont know if thats fixable, but i would be happy to know the answer why it happened.
It really depends on the complexity of the pattern. Sometimes, you can get way with circular pattern of a simple extrude. Or you can use emboss, which can be a tricky tool to use. If the handle is not circular, that adds to the complexity. General rule is to not pattern sketches and pattern features instead.
Hi there, I always enjoy watching your videos as they give me better ideas for how to design a partsin Fusion. As I watched through the video I did have a question are there any benefits or detractions to the different ways these have been designed?
I would say that the solid method is probably the most straightforward method, but it might be more difficult to make adjustments after the fact since the material thickness is already there. The surfacing methods are more complicated but allow for more flexibility in adding extra flanges, etc.
@@Fusion360School interesting and awesome, thanks for the reply!
Just a quick question, how did you rotate the model during 00:02~00:10 in the 3d view? What hotkeys were you using? Thanks.
My guess he's using a spacemouse (3Dconnexion or something similar), I don't think it's possible to do that with regular mouse + shortcuts
I am using a 3D connexion mouse. A regular mouse cannot achieve this kind of smoothness.
Sometimes, I wonder why not? Not sure if it is a hardware or software limitation.