Salam aghaye zarei man kheyli alaghe be mabahes remap be sorta herfei mesl Shoma daran VA 17 salame VA danesh amoz reshte mechanic hastam Agar momken hast man ra rahnamai konid
Its bullshit. Don't change blind the maps in the ECU like in video. Make proper mappak, find a DAMOS or A2L file for the particular software version of your ECU. Learn how the ECU works and try to understand motrocinc logic. This tutorial shows exactly t HOW NOT TO DO IT. Do not edit maps like in vidios.
If i want to be a able falsh boot read via obd As i know i need two files the boot read and vr obd Than what should i do? Do i need to use automatic import changes fuction to imort changes to frf and thats all?
This information is incomplete. You didn't just find the map. You knew it was there. You knew what you were looking at. This isn't really a guide. Plus it's incomplete. Thanks for trying anyway.
Thanks for comment, if you are excellent in this job therefore you need watch these, if you need complete toturials you must go to special toturials and spend money, I teach basic on these videos.
The uploader is generous enough to share this extremely useful information and guidance. Could you please not use words to put pressure on the person who did not deliver what you seek for? You could have asked nicely? He even showed how to use preview for us to get a glimpse of how a certain lambda table would look like. We should appreciate him for that.
Hi, thank you for your videos. They are very informative. I have been trying to fined the maps from the BIN file of a 2006 Porsche Cayman S. The ECU is a bosch ME7.8.1. Let me know if you can assist. Cheers!
hello can you identify a map that is not in potential maps i have problem with old M2.10 ecu it opens the map but gives no potential maps i need just to read the values are you able to help ???
So, how do you know wich map is a lambda and wich one is a different map. How do you know all the maps because it doesn't say somewhere... Thanks in advance!
this is not how you should do it, he is guessing which map is which by looking at how its shaped. There's multiple identical or almost identical maps that the ecu uses in different situations, you need to know exactly what you change.
GOOD , question let the administrator answer this question. I like it, how do you know if this is lambada or map, ? We are waiting the administrator to reply this.
Salam aghaye zarei man kheyli alaghe be mabahes remap be sorta herfei mesl Shoma daran VA 17 salame VA danesh amoz reshte mechanic hastam Agar momken hast man ra rahnamai konid
دوست عزیز من حرفه ای نیستم، اساتید خیلی حرفه ای ایران دارد، من فقط چیزهایی که بلدم به اشتراک میذارم
Bonjour,
Je cherche la cartographie d'injection du M7.4.4 (Saxo VTS100ch), si jamais vous l'avez ... Merci.
Brigado,por compartilhar com agente seus conhecimento.
Tenho tentado aprender aos pouco pois não tô em condições de paga um curso agora.
Its bullshit. Don't change blind the maps in the ECU like in video. Make proper mappak, find a DAMOS or A2L file for the particular software version of your ECU. Learn how the ECU works and try to understand motrocinc logic. This tutorial shows exactly t HOW NOT TO DO IT. Do not edit maps like in vidios.
can you please provide us with some resources/links on where to learn form, where to start ? Thanks.
If i want to be a able falsh boot read via obd
As i know i need two files the boot read and vr obd
Than what should i do?
Do i need to use automatic import changes fuction to imort changes to frf and thats all?
This information is incomplete. You didn't just find the map. You knew it was there. You knew what you were looking at. This isn't really a guide. Plus it's incomplete. Thanks for trying anyway.
Thanks for comment, if you are excellent in this job therefore you need watch these, if you need complete toturials you must go to special toturials and spend money, I teach basic on these videos.
@@mohsenzarei2368 I looked at your video for what it was, to learn. I'm No expert. Just trying to find a starting point in the wrong place.
Where is the wrong place
The uploader is generous enough to share this extremely useful information and guidance. Could you please not use words to put pressure on the person who did not deliver what you seek for? You could have asked nicely? He even showed how to use preview for us to get a glimpse of how a certain lambda table would look like. We should appreciate him for that.
@@darkcashyz I mean it's called constructive criticism, he was respectful with it. If you put stuff out you gotta be ready for bad reception.
أسهل طريقة لشرح winols ربنا يوفقك على هذا المحتوي
Thanks bro
Factor for 8bit lambda map is 0.0078125.
Where can I find the factors for all the maps? Somewhere in the FR? Thanks
@@nericj6769 In the Damos files of the each ECU.
Hi, thank you for your videos. They are very informative. I have been trying to fined the maps from the BIN file of a 2006 Porsche Cayman S. The ECU is a bosch ME7.8.1. Let me know if you can assist. Cheers!
The failure is ,when open file , where will you choose vehicle file from the software created ??
ربي يبارك فيك ... انت
معلم
hello can you identify a map that is not in potential maps i have problem with old M2.10 ecu it opens the map but gives no potential maps i need just to read the values are you able to help ???
Thank you for discription😍
Ecu bosch me7 mt whith who read this, kess or ktag, protocol ?
Hi, i need map for injection 😋 thanks you man
What is best software between Ecm titanium and winols 4. ??
hey can you schow how to deactivate o2 sensor?
What tools did you use to connect & read the ECU?
Kess V2, vvdi prog or any programmer can read data
@@mohsenzarei2368 thank you, have you tried scanmatik? the genuine or Chinese clone?
No Sir
جهار تا کم چهار تا رزیاد خخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخخ مردم از خنده
du you have a damos
So, how do you know wich map is a lambda and wich one is a different map. How do you know all the maps because it doesn't say somewhere... Thanks in advance!
this is not how you should do it, he is guessing which map is which by looking at how its shaped. There's multiple identical or almost identical maps that the ecu uses in different situations, you need to know exactly what you change.
GOOD , question let the administrator answer this question. I like it, how do you know if this is lambada or map, ? We are waiting the administrator to reply this.
ممكن رقم تلفونك واتس اب ؟
hi me7.4.4 .... i want to boost it can you help
I can
Can you teach remapping?
Not now
Hi bro how we identify the maps if its a TPS naps or Lambda Maps tym god bless u
Just go ahead and do more you'll be professional
@@mohsenzarei2368 can you teach me more about this
Do you have A2L file?
No
سلام استاد در مورد پروگرمر مطابق با ماشین ایرانی برای تیونینگ .. چی ارزانترینه .
Tnm کامل ترینه قیمتها فرقی نداره
Hi
Can I change the fan turn on for Peugeot fuel 307 model 2005
Ecu number me7.4.4
Send file for me I'll do it
@@mohsenzarei2368 where I can send it to you ?
@@mohsenzarei2368 to your gmail or where ,
@@wamedbasil891whats up number: +989033976010
Was this done? I can change engine cooling fan setpoint start and stop on both me7.4.4 & ME7.4.5
heloo, how can i contact you
Give me you whats up number I contact you, also you can ask your question hier
@@mohsenzarei2368
can you make bosch me17.9.55 for edit, in winols
What do you want?
@@mohsenzarei2368 mappack
@@autotronic84 I haven't