@@Ecdetails the 3 small dots makes for a bad time for me. I sold the 1st bottle I bought because of it. Lol Then I kept seeing people raving about it and someone made a comment you need like 2 tiny dots and that's it. It's crazy how wet that polish/compound stays pass after pass.
I did a black Monte SS last week and it was very oily. Gyeon Prep had to be used to remove the film. I used three drops and did a criss cross pattern ala Brian at Apex.
I agree Idosave for maintenance. In my experience only half a car otherwise you’ll get polymer spots. And I don’t know if you’ve noticed, but Idrosave attracts pollen like crazy if you don’t put anything on top of it.
@@Ecdetails most definitely I just got my first rupes 15 and griots mini polisher with 1 inch attachment with p&s but what would you recommend for a great cutting compound
Nice review, much appreciated. The only other detailed look at Rehab I have seen so far is Brian from Apex Detail. Looks like it's worth adding to the arsenal!
Hey Eddie - which pads would you recommend when using Rupes All In One Uno Protect? Mainly using it to clean the paint of any clay towel marks and some pop. I’ve used rupes yellow foam and diy waffle foam but not sure if I should try something else. Thanks in advance!
I’ll just tell you what I use and note it’s preference Lake country orange Buff shine orange Blueberry And a few rotary cutting / microfiber For uno protect depending on how much cut orange 🍊
That new diy rinseless i bet is awsome.Eddie what is the best way for the piano black b pillars my f150 looks like that after its bee coated with zr53 coating.Eddie got a link for that black an yellow polisher
Bro I would to be honest brad at ADS said to put ppf on top it hides, but if your like me we old school I would go wool (watch heat) then hit with a soft pad and finish it out you will get close to perfect
I gotta question, how do you chose which coating your going to put on a car? Congrats on hitting 5,000 G.........and you had me lmao when you said "shout out to sucking" 😂😂
Great video bro 💪💪. Sometimes a true clay bar is needed the vehicle was hammered. That car came out glossy. Bro nasiol cooks from 😂😂. I learned the hard way. You’re a brave soul for trying it out like that 😅
Looks like DIY rinseless is like that girl from high school who was always a little too thin, but then went to college and got a little thicc. Please tell me it doesn't smell like green apple dish soap anymore... Edit: lol shout out to being fat! I don't know why I've never thought to open the damn door. Thanks for the tip bro. Rehab is great stuff. I'm going to give it a good test against Gold Standard and TLC on my wife's BMW here soon once I can find the time.
@@Ecdetails lol cause you don't read your Facebook messages 🤪. I really wanted hero, but I can't wait until the end of may..... I had to send that v2 caca back lol. Oh BTW, I did my first wash with the ultra black sponge. I do like it better when the vehicle is dirtier, but if it's not major dirty I think Ill do the towels. Going to get me some of the flip towels.
Don't worry next week something else will be the best. They all clean your car and if done right you won't scratch or mar it. Although I did buy some hero. Kind of dried my hands out. But my car and truck are clean.
Bro you’re a beast. Filming, editing, polishing a car, and publishing a video all in the same day.
Appreciate you bro
“Enjoying this beautiful day the Lord has given me” 🐐
God is good bro
@@Ecdetails We comply with God first!
@@EcdetailsI second that!
That new rinseless loooks thick!!!
How did you do a video, a polish, an edit and went to church😂😂😂
Lol , everyone wants to be a beast until its time to do what beast do
The Mirka with the blue pad is like a little hummingbird. Wow!
Ya its crazy!!!!
"stick your stomach in there", made my morning. In the fight with you Eddie...golden bits of knowledge i can relate to.
Thanks walter appreciate you man haha 😆
For those of you that have had a tough wipe off with 3D one, less is definitely more. Since i started using less its been an easier wipe off.
3d after all these years is soo good thanks for sharing that
@@Ecdetails the 3 small dots makes for a bad time for me. I sold the 1st bottle I bought because of it. Lol Then I kept seeing people raving about it and someone made a comment you need like 2 tiny dots and that's it. It's crazy how wet that polish/compound stays pass after pass.
I did a black Monte SS last week and it was very oily. Gyeon Prep had to be used to remove the film. I used three drops and did a criss cross pattern ala Brian at Apex.
Car looked amazing! It was interesting to hear about DIY rinseless 2.0. Can’t wait for that! Thanks for sharing tips and tricks as u went too!
Thank you so much Becca!
Car came out looking great Eddie. Rehab looks like a good product for a 1 step. Thanks.
Thanks bro! Hope your well!
It was a good Sunday and now I get to relax watching Eddie do his thing
Appreciate you thanks for watching
EC pumping out videos like it's free. Awesome work !
Thanks bro!
Loving these vlog style videos lately Eddie. Great stuff
appreciate you man
Yes the review I have been waiting on! Thank you sir
Hope you like it!
Great content as always Boss! My apologies as I thought I was subscribed to you. Just SMASHED THAT BUTTON! Keep up the great work my dude!
Thanks for subbing bro appreciate you
I agree Idosave for maintenance. In my experience only half a car otherwise you’ll get polymer spots. And I don’t know if you’ve noticed, but Idrosave attracts pollen like crazy if you don’t put anything on top of it.
Never experience the pollen even on some cars I’ve seen but good to know Preludio and idrosVe are wild
Let’s goooooooo!!! appreciate the vid my guy
Thanks for the Idea hope it answered questions for you
@@Ecdetails most definitely I just got my first rupes 15 and griots mini polisher with 1 inch attachment with p&s but what would you recommend for a great cutting compound
@@JCoova87 like above a one step
@@Ecdetails yea something without polish strictly cut
@@Ecdetails yea something with straight cut
Putting in that work! And make sure to always clean your crack before you give the vehicle back
haha clean it good
Thank you Eddie
Thank you for being Spanish and sexy
I just ordered my second bottle of P&S Rehab. That, paired with DIY's foamed wool is a great combination
It’s a great compound
Such a quiet polisher.
Ya man I can actually think during it
Great video! Can’t wait for DIY v2! Thanks for everything you do and keep dropping these bussin’ videos!
Appreciate you watching! means alot
Nice review, much appreciated. The only other detailed look at Rehab I have seen so far is Brian from Apex Detail. Looks like it's worth adding to the arsenal!
It is worth it in terms of ease of use , work times etc thank you for watching
Big big fan of this kind of video 👍🏼
Thank you!
Hey Eddie - which pads would you recommend when using Rupes All In One Uno Protect? Mainly using it to clean the paint of any clay towel marks and some pop. I’ve used rupes yellow foam and diy waffle foam but not sure if I should try something else. Thanks in advance!
I’ll just tell you what I use and note it’s preference
Lake country orange
Buff shine orange
Blueberry
And a few rotary cutting / microfiber
For uno protect depending on how much cut orange 🍊
Good review Eddie car came out looking great.
Thanks for watching!
Dude you’re getting so close to 5k 🎉
ABOUT TO give that kranzle away hope tim is ready we creeping to 5k
That Mirka though…. Rehab does great…but 3D One is still champion in my book ….📕 hope you’ve had a great weekend! Great video and God Bless!!
3d one is wild, thank you for watching
Does Buff&Shine make these pads for P&S Eddie?
I don’t know 🤷
Great review bro! I’m glad you compared it to 3d one. Sometimes 3D one wipe off is greasy did you see that with P&S?
P&s was not greasy like 3d one the wipe off was amazing
Eddie, have you had an opportunity to use rupes uno pure? What's your favorite light finishing polish?
A long while ago I have
That new diy rinseless i bet is awsome.Eddie what is the best way for the piano black b pillars my f150 looks like that after its bee coated with zr53 coating.Eddie got a link for that black an yellow polisher
Bro I would to be honest brad at ADS said to put ppf on top it hides, but if your like me we old school I would go wool (watch heat) then hit with a soft pad and finish it out you will get close to perfect
New DIY rinseless ?!
chefs kiss
Eddie, that yellow polisher looks very interesting. Do you think I can get one in Canada? 🇨🇦👍👍
Ya try carzilla
Btw have you tested koch f6? It js my goto onestep compound.
Ya have. liter of it :)
@@Ecdetails how does it compare to rehab and do you like it? Any other medium cutter you prefer?
@@jtm1979 f601 has a little more bit but the wipe off on rehab is unmatched
@@Ecdetails and the finish is about equal? F6 is not bad to wipe off, but certainly not effortless.
Nice chill video brotha! So you is your favorite one step?
Thanks man appreciate you
Before you update the list can you try out ECH2O? I'd be curious on your thoughts.
Ya I can do it again
@@Ecdetails Oh if I missed it, I'll continue digging for it. Thanks E!
No I didn’t do a video I will do it against Gyeon and re do a video no worries
@@Ecdetails appreciate the work you do!
Does DIY cut better than 3d one?
Interesting question
@@Ecdetails guess it's another video to find out haha.
I gotta question, how do you chose which coating your going to put on a car? Congrats on hitting 5,000 G.........and you had me lmao when you said "shout out to sucking" 😂😂
I generally go with one I used on customer car and go from there
If it last the winter imma use it
Great video bro 💪💪. Sometimes a true clay bar is needed the vehicle was hammered. That car came out glossy. Bro nasiol cooks from 😂😂. I learned the hard way. You’re a brave soul for trying it out like that 😅
Nasiol lmao easy coating bro is what they keep telling me
You dont use 5" on your ex620/21? Works great!
Nah always use 6 inch pads
Eh. I'll stick with my 1 step trio of Sole, Cartec 9000 and Fireball 1 step
Cartec 9000 is goated
@@Ecdetails Nah for real, it's so easy 🤌🏾🔥
You still like OP Compound the best?
Ya have half a bottle left out of the 3 I had
Looks like DIY rinseless is like that girl from high school who was always a little too thin, but then went to college and got a little thicc.
Please tell me it doesn't smell like green apple dish soap anymore...
Edit: lol shout out to being fat! I don't know why I've never thought to open the damn door. Thanks for the tip bro.
Rehab is great stuff. I'm going to give it a good test against Gold Standard and TLC on my wife's BMW here soon once I can find the time.
Thought I was the only one who doesn’t like green apple smell
@@MikeBee071 I wish they would make it smell like Ceramic Gloss, but a Hawaiian Punch scent would be even better.
Haha th door tip , diy v2 is good and rehab worked good smelled good
Good video big bro can’t wait for the diy v2 hope they kept the surfactants 💪🏼💪🏼👍🏼👍🏼
No worries
@@diydetailofficial when will the v2 to be out?
They did still foams and cleans it’s wild
Of course you say that after i ordered Fenylab v3 🤦🏼♂️
How was I suppose to know lmao 😂 Feynlab v3 1oz 3 gallons of water don’t look back
@@Ecdetails lol cause you don't read your Facebook messages 🤪. I really wanted hero, but I can't wait until the end of may..... I had to send that v2 caca back lol. Oh BTW, I did my first wash with the ultra black sponge. I do like it better when the vehicle is dirtier, but if it's not major dirty I think Ill do the towels. Going to get me some of the flip towels.
Don't worry next week something else will be the best. They all clean your car and if done right you won't scratch or mar it. Although I did buy some hero. Kind of dried my hands out. But my car and truck are clean.
I need rehab... and I am not talking about P&S 😭😭😖❤
lmao
I use alot of p&s products but this one ? Naw , for 15 , 20 bucks more it just dont show me enough over 3d .
Rehab smells, good work times are good and does decent on the cutting , softer paint its a champ
Wow, new Rinseless from DIY Detail?
Humberto Yvan is coming to play
@@Ecdetails that's about time to do a revision and come stronger💪💪💪
Hardest work in the room!
Appreciate you sir!
I now know when we get another car piano black is where I draw the line. Negative ghost rider.
Ya its crazy those swirls lord
👌🏻
First lol
1stfrompuertorico is slippin haha
Man that Mirka sounds nice lol…I ordered rehab and a variety pack of edge guard pads this weekend to try out
You’ll enjoy it!! It does work and smells so good