Thanks Moto Blonde! I picked your video to watch because I ordered a set of Kuryakyn Trigger levers. I also bought snap ring pliers by Channellock, which comes with 5 pairs of different size changeable tips. You do a wonderful job of explaining... well almost anything - and you seem to be decades wiser than your own age.
wow thanks about the button brake light switch. my brake lights were stuck on after a 2000 mile maintenance job at the shop. well i am sure you kmow the rest. i just got a hammer and blunt screw driver and lightly tapped the brake lever to align with the button. problem solved. thanks you are a blessing.
Just ordered a set for my 2020 Harley RGS without this video I wouldn’t have heard of them. Looks like a great quality product. I let them know how I found out about them. Thanks for the good videos
I had the Oberon's on my SG. But 1fngr's adj mechanism is less conspicuous. I wish 1fngr wouldn't be so crazy on branding their product. I just want to roll my motorcycle without being an advertising billboard for any certain company. Good vid...
I appreciate you doing this. I have a Softail Slim, but it appears to be the same procedure. I ordered mine from 1 Finger, but didn't get any new pins or snap rings. Maybe because different models. Again, thank you for the how-to's.
Great video, thank you. I purchased the levers after watching your install and doing some research. I've noticed some wobble from the levers themselves and was wondering if you noticed the same thing. 1FNGR sent some washers for the pins but that didnt really correct the lever play.
Great DIY tutorial video as always. I wanted to get a set of this 1finger levers but watching review video on UA-cam and people's testimonials, most of them are stating that clutch would not fully engage with 1finger clutch lever. I was wondering how is your experience with this set up? I have 20 m8 low rider s BTW.
I first got them for my Low Rider S and I LOVE them - so when they came out with them for the touring bikes I had to get a set. I haven’t had any issues with mine on the low rider.
Still interested on this lever n watching ur video again. I want to know If this lever has a neutral safety switch that allows you to start on 1st gear?
Great video and the following comment is not to critique in a negative way, but, I don’t think you had to remove the housings on the brake side. The HD lever instructions show squeezing brake side lever a little before pulling snap ring. Then, insert a piece of cardboard into the gap on the front side of the lever. I believe that depresses the piston under the housing enough to prevent taking the housing off. I’m about to do this so we will see. If it doesn’t work I’ll comment again! Again, great video and easy to follow!
You always do excellent install vids. Well done. Congrats to Ant on the RG !!! Now only do you buy him levers, you do the labor!!! Score by you !!!! Thanks for sharing MB ! 🙏🏽
My 05 Road Glide have a pin inside the brake lever and if you allow that to come out it breaks the soldered joint and the brake lights stick on is that the same for the new ones
So I will look into the levers for my bike and little t rex tell your friend congratulations on the road glide I see he got the RDRS for the bike I was looking for that for my road glide standard but didn't find it oh well I like it anyway now I need is spring. From a old man on a motorcycle stay safe and enjoy the ride 👍 old ny out
Congratulations on the Road Glide !!! Ron and I love his. You think you’ll take a ride on it ? Nice levers. Your innuendos😜. Ron’s got the low fused handlebars ordered for his and can’t wait to check em out. Cmon summa 🌞🌞
CMON SUMMA!!! Heck yes I'm gonna ride it! BUT I promised I'd let him take it out first - so I did - then the snow came 🤣 I can't wait I'm dying to check it out!! He loves it. Ohh nice handlebars! He's deciding which ones he wants.
Thank you! I don’t have it posted - I recorded it very early on - and it’s pretty poor quality - especially the audio. If I can salvage it I will definitely post it!
Wow the new Harley Glide looks awesome 🏍️👍. Look forward to seeing that on the road. Maybe you can take it for a spin sometime. I do like the new brake & clutch levers. Nothing worse than too far out levers.
New subscriber here! You didn’t mention the manufacturer of those adjustable levers. I googled what was on the box but it sent me down a rabbit hole. ☹️
Any updates on the quality since you've been using these? I've used Oberon adjustable levers but found the lever ends snap off fairly easily when you're training hard and dropping the bike in aggressive leans. I'm wondering if these are any tougher.
OMG AN ULTRA RARE VIVID BLACK HARLEY!! I thought mine was the only unicorn with that color ! lol Road Glide FTW!! I just got rid of my tank console, I hate that whole 80's trapper keeper swirl design they went with
Hi Heather. The factory levers have a wider surface than the aftermarket ones you put on. The factory levers might be more comfortable to hold for long periods of time stuck in traffic. Hate snap rings!! Worked on my passenger pegs recently and one of the snap rings came off well but then went flying off my snap ring pliers. Looked for that damn thing for about 30 minutes. Went to the store and got more but I hope that stupid snap ring burns in hell for flying off!!
What snap ring pliers are u using for these snap rings? I've bought 2 different sets of snap ring pliers trying to get ones with small tips to fit and they haven't fit! They're so tiny
Nice install! But we didn't have eye protection on and you had us really close to those snap rings one of those flies off there go an eye! 😂 nice Camera by the way! Really clear !
Watch her take a Harley apart! I asked my Husband if he would like to join me watching you put some levers on. He thought I said leathers! 😂😂😂😂😂😂😂 We both enjoyed your video. Very educational. I have always wanted to ask. How in the heck do you work with your hair down? 😊
One’s again a great vid , got little scared when the black gloves came on 🤣🤣 and I would love if my woman would have an interest in bikes but no ! So your man is a lucky guy 💪🏻👊🏻
"They were ok...but pretty trash" 😂😂😂😂 Welcome to the Road Glide (aka Shark) Nation!!!!! I predict some heated grips and apehangers in that bike's future! 😉 GREAT DIY VIDEO!!!!
Great video as always, but you're gonna have to come up with a new difficulty rating system that is more sensitive to those of us who are follicly challenged 🤣😂🤣. I'm gonna start my own UA-cam channel and call it "MotoBald" 🤗
i find it ironic that its a 1 finger adjustable levers and you have one finger taped up...and your driving finger no less lmao. the bike looks good. good vid
Their setup for the 2021 Road Glide with a quick adjust cable doesn't work. The clutch doesn't fully disengage. I went back and for with their technical dept modifying the clutch cable, handlebars, pulling the adjuster to it's limits and no worky. I asked for a refund and they ghosted me. I've been a professional technician for almost 30 years and have adjust hundreds of Bowden cables in my life from transmissions to convertible roofs. This product doesn't work on the 2021. Buyer beware. Poor service.
Thanks for watching! Make sure to SUBSCRIBE!!!
What do you think of the trade-in?! Road King or Road Glide???
Oh I sure subscribed a while back, hey you rock.
switchback lol
@@locoocho2415 thank you!
I ride a Road Glide, so I’m going Road Glide 😁
I ride a Roadking sooooo Roadking
Ron’s grips-HD 56100048 stylish and comfortable
Thanks Moto Blonde! I picked your video to watch because I ordered a set of Kuryakyn Trigger levers.
I also bought snap ring pliers by Channellock, which comes with 5 pairs of different size changeable tips.
You do a wonderful job of explaining... well almost anything - and you seem to be decades wiser than your own age.
Hey Jeff! Thank you so much I appreciate it! Hope it is helpful! Enjoy those new levers!
wow thanks about the button brake light switch. my brake lights were stuck on after a 2000 mile maintenance job at the shop. well i am sure you kmow the rest. i just got a hammer and blunt screw driver and lightly tapped the brake lever to align with the button. problem solved. thanks you are a blessing.
Just ordered a set for my 2020 Harley RGS without this video I wouldn’t have heard of them. Looks like a great quality product. I let them know how I found out about them. Thanks for the good videos
Appreciate it!! Hope you like them!
Thx for the video
If possible where to get these levers
Thank you
Link is in the description - and there's a code as well for a discount!
I like them both. Also, great job of demonstrating your installs. Nowadays, many motorcycle riders don't even know how to check their own oil!
Thank you!!
Oil whats that
I had the Oberon's on my SG. But 1fngr's adj mechanism is less conspicuous. I wish 1fngr wouldn't be so crazy on branding their product. I just want to roll my motorcycle without being an advertising billboard for any certain company. Good vid...
Thanks for watching!
I appreciate you doing this. I have a Softail Slim, but it appears to be the same procedure. I ordered mine from 1 Finger, but didn't get any new pins or snap rings. Maybe because different models. Again, thank you for the how-to's.
I did have a video on the Low Rider S, but the footage was ruined. You will love them!
Great video, thank you. I purchased the levers after watching your install and doing some research. I've noticed some wobble from the levers themselves and was wondering if you noticed the same thing. 1FNGR sent some washers for the pins but that didnt really correct the lever play.
Great job with the front brake switch I have personally goobered that before with a grip change
I've heard that can be tricky!
You made that look easy :) 50 degrees today in Maryland, my bride and I went for a ride (she rides a GL1800 trike)
Nice!! Enjoy that weather!
Nice work on a beautiful bike, I know what you mean about those HF snap-ring pliers. I did the same thing, and bought a better pair. Thanks
I’m SO glad I got the new set 🤣 what a difference
Hi. Nice video! Do you recommend this for individuals with small hands?
Definitely - they are adjustable so you can have them wherever is most comfortable.
Thanks for your help! I was wondering WTF I was doing wrong on the front brake side.
Great DIY tutorial video as always. I wanted to get a set of this 1finger levers but watching review video on UA-cam and people's testimonials, most of them are stating that clutch would not fully engage with 1finger clutch lever. I was wondering how is your experience with this set up? I have 20 m8 low rider s BTW.
I first got them for my Low Rider S and I LOVE them - so when they came out with them for the touring bikes I had to get a set. I haven’t had any issues with mine on the low rider.
@@MotoBlonde thank you for ur reply n feedback
Still interested on this lever n watching ur video again. I want to know If this lever has a neutral safety switch that allows you to start on 1st gear?
Long shot here, but what did you think of the levers long term. Do you recommend them or have you found better?
Thanks for all the videos, I'm looking to do this mod on my 2020 Ultra. Keep the videos coming & ride safe when it gets better weather.
Thanks for watching!
Great video and the following comment is not to critique in a negative way, but, I don’t think you had to remove the housings on the brake side. The HD lever instructions show squeezing brake side lever a little before pulling snap ring. Then, insert a piece of cardboard into the gap on the front side of the lever. I believe that depresses the piston under the housing enough to prevent taking the housing off. I’m about to do this so we will see. If it doesn’t work I’ll comment again!
Again, great video and easy to follow!
Merci pour la vidéo mais je n'ai pas trouvé le lien pour les leviers bonne continuation
*10% OFF!!!!* Use code MotoBlonde10 on anything in their store!
1FNGR: clcr.me/1FNGR
You always do excellent install vids. Well done. Congrats to Ant on the RG !!! Now only do you buy him levers, you do the labor!!! Score by you !!!! Thanks for sharing MB ! 🙏🏽
Thanks AB!!! If he was up to it he probably would have fought me to do it 🤣 I saw an opportunity🤣
OMG Your 'Pony Tail Scale" idea is SO CUTE!!
🙌♥️
My 05 Road Glide have a pin inside the brake lever and if you allow that to come out it breaks the soldered joint and the brake lights stick on is that the same for the new ones
Nope! I don't think the newer models have the same switch - mine is a little blurry but I showed what it looks like when I took it apart.
So I will look into the levers for my bike and little t rex tell your friend congratulations on the road glide I see he got the RDRS for the bike I was looking for that for my road glide standard but didn't find it oh well I like it anyway now I need is spring. From a old man on a motorcycle stay safe and enjoy the ride 👍 old ny out
Waiting on spring!!! Thanks for watching!
Good job blondie I'm going to bring my bike to you for upgrades
The more the merrier!
I was looking at those levers just the other day. Great info. May have to pull the lever errr trigger on a set for the StreetGlide.
I see what you did there 😆
@@MotoBlonde and I did just order a set 😂😂
Snap ring pliers FTW...but it’s hard to find a set that isn’t junk. Good how to!
Thanks for watching!
Congratulations on the Road Glide !!! Ron and I love his. You think you’ll take a ride on it ? Nice levers. Your innuendos😜. Ron’s got the low fused handlebars ordered for his and can’t wait to check em out. Cmon summa 🌞🌞
CMON SUMMA!!! Heck yes I'm gonna ride it! BUT I promised I'd let him take it out first - so I did - then the snow came 🤣 I can't wait I'm dying to check it out!! He loves it. Ohh nice handlebars! He's deciding which ones he wants.
Thinking of buying a pair of 4 fingers and putting on my fxlrs. Still worth it or would you go another company
I have the 2 fngr easy pull levers on my fxlrs - would buy them again in a heartbeat.
@@MotoBlonde sweet just pulled the trigger on a set ty
Great job young lady. Do you have the install for your clean ride ?
Thank you! I don’t have it posted - I recorded it very early on - and it’s pretty poor quality - especially the audio. If I can salvage it I will definitely post it!
Do they have them for older touring 13 cable?
Just what you needed. Stay strong!
Great vid, hope Anthony feels better and your finger heals.
Thank you!
Nice I ordered a set for my 2020 RG . You look wonderful your a young Chick that's good with her hands
Appreciate you
Regards to you man luck guy 😉
Enjoy the levers!
So... When removing the snap rings, you pull them down, not off sideways. They won't deform that way and can be reused a bunch
Hi, Is the levers compatible with a Harley Fatbob M8 2021?
Yup! I have the 2 finger easier pull levers on my 2020 Harley Low Rider S - I LOVE them. Use "MotoBlonde10" for 10% off if you get a set!
Is there a link for these
I may do that as well. Thanks.
Hey girl I saw you on the side chat for the badgers live and have been meaning to subscribe but finally got to it good job on the video
Hey!! Thank you so much!! Back at u!!
Great vid. I just wish I would have watched it before I changed my grips. Arrrrr. Could have done both jobs at the same time. Thanks for sharing.
ah shoot! Thanks for watching!!
What type of grease did you use for the pins on the levers
Wow the new Harley Glide looks awesome 🏍️👍. Look forward to seeing that on the road. Maybe you can take it for a spin sometime. I do like the new brake & clutch levers. Nothing worse than too far out levers.
Heck yes I'm taking it out! Just waiting on this weather to leave us alone!! haha!
I also heard you need to be extremely carful with the Break switch as it is delicate.
Hello, I see always fun. Now install the moonsmn single row led light bee
Muito, muito obrigado por compartilhar o vídeo. Me ajudou muito a trocar os meus. Abraço de um brasileiro!!! 😊
New subscriber here! You didn’t mention the manufacturer of those adjustable levers. I googled what was on the box but it sent me down a rabbit hole. ☹️
1FNGR (that’s the company - I just realized it probably sounded like I meant one finger - sorry! )10% off link is in the description of the video!
Nice job. I can see grips are next.
Definitely!! Thanks for watching!
Any updates on the quality since you've been using these? I've used Oberon adjustable levers but found the lever ends snap off fairly easily when you're training hard and dropping the bike in aggressive leans. I'm wondering if these are any tougher.
So far so good - I've had the 2 finger shorty levers on my low rider s for almost a year now and I have no complaints!
If anything you want copper levers or something that stands out
0:02 - Thick glovers, serious work about to occur?
You deserve way more subscribers....
Thank you - appreciate that! I just started!
OMG AN ULTRA RARE VIVID BLACK HARLEY!! I thought mine was the only unicorn with that color ! lol Road Glide FTW!! I just got rid of my tank console, I hate that whole 80's trapper keeper swirl design they went with
HAHAHAHA KRIKEY!! YOU ONLY SEE THEM IN THE WILD!! Trapper Keeper - I'm never going to unsee that now
@@MotoBlonde it was literally the only thing I saw since day one, it has been maddening. So glad it I finally got rid of it
What tuner are you using?
No tuner on the road glide yet. FP3 on my Low Rider S
Cool, been debating what tuner to use on my low rider s but don't want to void the warranty.
What kind of lube you using there?
Hi Heather. The factory levers have a wider surface than the aftermarket ones you put on. The factory levers might be more comfortable to hold for long periods of time stuck in traffic. Hate snap rings!! Worked on my passenger pegs recently and one of the snap rings came off well but then went flying off my snap ring pliers. Looked for that damn thing for about 30 minutes. Went to the store and got more but I hope that stupid snap ring burns in hell for flying off!!
hahaha I hate it when that happens!!! They are so frustrating!
What snap ring pliers are u using for these snap rings? I've bought 2 different sets of snap ring pliers trying to get ones with small tips to fit and they haven't fit! They're so tiny
I believe I used Craftsman ones here! Got them at Lowes
Cool video 👍 definitely time for some new grips
Haha it's really obvious now!
Nice install! But we didn't have eye protection on and you had us really close to those snap rings one of those flies off there go an eye! 😂 nice Camera by the way! Really clear !
Haha!! I will have to get you guys some safety glasses🤣 Thank you!
I’m loving your videos.. you are so funny..😂😂😂
Thanks for watching!
king of the me too bikes. " I have a black road glide" "me too"
🤷♀️
Good one ! Love the bike!
Thank you!!
This may sound crazy but will WD40 work or can you tell me what type of grease was tht
Going on there site right after I see them on. Like them
it’s a 2 beard 😂❤️your channel.
I'm i the only one that found it ironic that you hurt that 1 finger 🤣🤣 . Good tutorial Moto, tell Anthony Happy Birthday. God Bless
🤣🤣🤣ONE other person said something! I was waiting for it!!! I will, thank you!!!
Love your channel! Why don't you carry passenger though? Would love to see a how to.
Thank you!!! I don't really have anyone too carry - maybe one day! I'm definitely not the one to show you right now lol!
Anyone know if these fit on M8 Softails?
Yes! I have them on my 2020 Low Rider S! There’s a code in the description for 10% off too!
You reminded me of a ninja when you put them gloves on. Thought you was going to crank up the judy chop!!.... 😂!! Be good and be safe!!
HIYA!!! haha Thanks for watching!
Can this fit on a 2021 road glide ?
They make them for the 21 yes! Just make sure you pick the correct year because 2020 was hydraulic clutch.
Another great Video! I had to laugh at 2:22 Let's get Kraken! ;) You're doing great!
Haha you know it!! Thanks for watching!
Hey! Moto Blonde it looks like you are just about finished with your garage insulation.
Yes!!!
Great job Enjoyed
Glad you enjoyed it! Thanks for watching!
Good Job GIRL !!!
Thank you!!!
what snapring pliers u have i keep getting ones toobig lol
Thank you!
@@MotoBlonde ???
@@PillowheadCreations not sure why that comment went there lol! I believe they are from harbor freight!
Thank you much for the info! I just Sub! Keep-em coming!... Stay safe sister.
Back at ya! Thanks for watching!
Nice install heather, was wondering if harley was dealing on the 2020's since the 2021's were hitting the floor. Ride safe gorgeous. 😎
We got it at the end of the year - but I'm sure there are still 2020's on the floor! :)
@@MotoBlonde we still have 6 including a 1/150 world wide Mayhem Road Glide
@@evinnice3321 Sweet!
Sweet Glide
Thank you!
Watch her take a Harley apart! I asked my Husband if he would like to join me watching you put some levers on. He thought I said leathers! 😂😂😂😂😂😂😂 We both enjoyed your video. Very educational. I have always wanted to ask. How in the heck do you work with your hair down? 😊
Great vids :)
Thanks for watching!
you saved my ass on a small problem i was having .. thanks even though you may never read this lol
Put these on my dyna.. no regrets
One’s again a great vid , got little scared when the black gloves came on 🤣🤣 and I would love if my woman would have an interest in bikes but no ! So your man is a lucky guy 💪🏻👊🏻
🤣Thanks for watching!
"They were ok...but pretty trash" 😂😂😂😂
Welcome to the Road Glide (aka Shark) Nation!!!!! I predict some heated grips and apehangers in that bike's future! 😉 GREAT DIY VIDEO!!!!
🤣🤣🤣 Thank you!!!
2021 Road Glides don't have a hydraulic clutch anymore.
I didn't know that! Haven't seen the new ones yet!
@@MotoBlonde yeah they were having too many issues with the hydraulic clutch so they went back to the cable clutch.
@@aragos32727 good to know!
Hi blondie!❤
Hey!!!
Great video as always, but you're gonna have to come up with a new difficulty rating system that is more sensitive to those of us who are follicly challenged 🤣😂🤣. I'm gonna start my own UA-cam channel and call it "MotoBald" 🤗
LOL you should definitely do that 🤣🤣🤣
Anthony is probably under the weather because he drove down the highway with the passenger window down in the winter 😁
hahahaha touche 🤣🤣🤣
i find it ironic that its a 1 finger adjustable levers and you have one finger taped up...and your driving finger no less lmao. the bike looks good. good vid
HAHAHA I was waiting for someone to say this because it was my first thought when I was editing it 😂😂😂 Thanks for watching!
Hey Heather, now I know where to bring the FXDR for new levers! Lol 😆. Look for my email. Thanks 😊
You got it!! I think I need a bigger garage! 🤣
@@MotoBlonde Hi Heather, I did send ya a email.
Lucky guy
Moto Blonde, Nice job. The new Levers look great. #MOTOBLONDENATION OR #BLONDENATION, You can pick your preference
Ooooh I like that better than #blondies 😆 I'm gonna have to marinate on that!
I don't know how you put those gloves on with a straight face 😂
🤣
1st to comment woot! Love your Videos!
Thanks for watching!!
🤘😘
🤘
Привет из России🤘👍😀
😎👍🏼👍🏼
no.. Do That!! LOL...
Hey girl I saw your
Badass and cute
Their setup for the 2021 Road Glide with a quick adjust cable doesn't work. The clutch doesn't fully disengage. I went back and for with their technical dept modifying the clutch cable, handlebars, pulling the adjuster to it's limits and no worky. I asked for a refund and they ghosted me. I've been a professional technician for almost 30 years and have adjust hundreds of Bowden cables in my life from transmissions to convertible roofs. This product doesn't work on the 2021. Buyer beware. Poor service.