Thanks for shairing your results through video, it's a great help and inspiration. How long did it take for you to see results? I built some gloves (with help from friends) and have been using them 2 hours per session, twice per day. I havw not seen a noticeable difference yet? What made you think you should try a different vibration pattern and how did you pick one?
@@WeSearch4u Hi Rusty. To notice anything tangible with the gloves has taken a bit of time because I have had so many problems with wires breaking off the motors. I think my friend and I have solved that problem we spent six hours working on the gloves yesterday and did a big upgrade
Hey David, I really appreciate it your update! Peter in Toronto I am also using homemade gloves... and experience the same motor failures because of wire breakage when I have to have to get the gloves off.
Hi I did understand where the motors actually went? Did they go inside the tubes or just stuck through the tubes?so they where level with the inside surface of the tubes? and there fore your fingers just rested on them? if possible can you show me a section through the tube itself? and what are they actually called so I can buy some? plus a kit of parts ,please . THANKS
Hi sir can you please tell us what all we need to make this i really need help as my wife is going to make as can not do much..please let me know how you made and what all we need to make it
Hi Tim, here is the link to the channel with all the instructions, plus their main video, best of luck!! Let me know how it turns out for you.😊😁😀 www.youtube.com/@pdvibrationtherapy ua-cam.com/video/1PfsVjnPAuQ/v-deo.htmlsi=4NnJ_OkyAZYdOGvo
Hi David, I noticed that your masking and dyskinesia appear to have really improved from your older videos. Do you attribute that improvement to the gloves?
Hi Basil. I attribute the masking and the dyskinesia improvement to the red light therapy and to the gloves. Thanks for noticing. I went for a walk this morning and one of the residents stopped 😀😁😊me to tell me how much my gait had improved also. Good feedback.
Hello, I am sorry, I cannot do that. This is a do it yourself project, best to find someone local who could assemble the parts for you. Here is a link to the UA-cam Channel and video that has all the instructions. Thank you for understanding.😊😁😀 www.youtube.com/@pdvibrationtherapy ua-cam.com/video/1PfsVjnPAuQ/v-deo.html
Hello, I am sorry, I cannot do that. This is a do it yourself project, best to find someone local who could assemble the parts for you. Here is a link to the UA-cam Channel and video that has all the instructions. Thank you for understanding.😊😁😀 www.youtube.com/@pdvibrationtherapy ua-cam.com/video/1PfsVjnPAuQ/v-deo.html
Hey David! Providing you with a link to another guy who is also working on his own glove too. Hope things are going well with you. Have not had time to watch your update videos, but, this one that I have watched looks promising for you! ua-cam.com/video/iLFuR8OmBbg/v-deo.html
Thanks Owen, I subscribed to the channel you sent me in case he has more updates. I changed the vibration pattern on the gloves a few days ago, definitely getting more benefit. Thanks. 😀😀😁
After giving my results some more thought, I uploaded a different vibration patter to the gloves to see what happens.
Thanks for shairing your results through video, it's a great help and inspiration. How long did it take for you to see results? I built some gloves (with help from friends) and have been using them 2 hours per session, twice per day. I havw not seen a noticeable difference yet? What made you think you should try a different vibration pattern and how did you pick one?
@@WeSearch4u Hi Rusty. To notice anything tangible with the gloves has taken a bit of time because I have had so many problems with wires breaking off the motors. I think my friend and I have solved that problem we spent six hours working on the gloves yesterday and did a big upgrade
Do these gloves therapy also helps with Parkinson's related dementia ?
@@maxlee-iy1rl hello I am sorry I do not know
I can see that you are doing much better with the new PD glove design.
Thank you so much 😎😀😊
I'm glad you are seeing some benefits. Keep up the great work!
Getting some really good benefit from it the last few days since I changed the vibration pattern 😀😃😊
@@LifewithParkinsonsplease tell us more about that!
@@manasikashyap Here is the place where you can download the different vibration patterns github.com/pdbuzzboard/pdbuzzboard
@@LifewithParkinsons thank you!! 💛
Happy to hear the gloves are helping you.
Thank you Sharon. I am very glad to have gotten this amount of benefit so far. 😀😊😎
Great video thank you very much!
No problem. I hope you are able to get your own.😀😁😊
Hey David,
I really appreciate it your update! Peter in Toronto
I am also using homemade gloves... and experience the same motor failures because of wire breakage when I have to have to get the gloves off.
Hi Peter. Thanks for letting me know. I strongly recommend since you are having the same problems to switch over to the little pipes.😊😀😎
@@LifewithParkinsons yes, I will try to incorporate your idea.
By the way, I reached out to you through Facebook today. - Peter
@@koropatwa Yes I received your message. I reached out to you on whatsapp
How you did you made? Which video did you followed?
@@daman4589 pd buzzboard video
Good work big guy ❤
Thanks GoPro 😊😀😊
Keep up the great research in your DIY laboratory. Awesome 👏
Hi Mark. Thank you. 😀😎😊
Hi I did understand where the motors actually went? Did they go inside the tubes or just stuck through the tubes?so they where level with the inside surface of the tubes? and there fore your fingers just rested on them?
if possible can you show me a section through the tube itself?
and what are they actually called so I can buy some?
plus a kit of parts ,please .
THANKS
I will make up a short video for you with all the camera angles😀😁😊
Hello, please check out this video as well as the description below. It should have all of your answers, thanks😊😁😀
Hi sir can you please tell us what all we need to make this i really need help as my wife is going to make as can not do much..please let me know how you made and what all we need to make it
Hi Daman, all the info you need is on this channel.😀😁😊
ua-cam.com/video/1PfsVjnPAuQ/v-deo.htmlsi=Fhap00kEJOrwkFL4
Hi where can I get all the details so I can make a pair of gloves?
Hi Tim, here is the link to the channel with all the instructions, plus their main video, best of luck!! Let me know how it turns out for you.😊😁😀
www.youtube.com/@pdvibrationtherapy
ua-cam.com/video/1PfsVjnPAuQ/v-deo.htmlsi=4NnJ_OkyAZYdOGvo
Hi David, I noticed that your masking and dyskinesia appear to have really improved from your older videos. Do you attribute that improvement to the gloves?
Hi Basil. I attribute the masking and the dyskinesia improvement to the red light therapy and to the gloves. Thanks for noticing. I went for a walk this morning and one of the residents stopped 😀😁😊me to tell me how much my gait had improved also. Good feedback.
do the motors touch the fingerprint area or the nail?
Hi Jeremy the motors touch the fingerprint area
I am not able to make my own gloves, can you make a set with the associated equipment for me and pay you.what you need. Many thanks
Hello, I am sorry, I cannot do that. This is a do it yourself project, best to find someone local who could assemble the parts for you. Here is a link to the UA-cam Channel and video that has all the instructions. Thank you for understanding.😊😁😀
www.youtube.com/@pdvibrationtherapy
ua-cam.com/video/1PfsVjnPAuQ/v-deo.html
I think I may have found a great solution to the finger pipes. I don't know how to add photos on the comments
They are extremely cheap and comfortable
Hi Donald, you can leave a link in the comments, but I don't think a photo.
Fantastic! Please share the link.
Does the thumb provide no benefit?
Hi Wesley I think no because it has a heartbeat.😀😁😊
@@LifewithParkinsons ah ok thanks.
Cue1 might help some. It is sad Parkinson's sufferers have to resort making vibro-tectile gloves at home...
Hi Ivan the Cue1 is not currently available in North America no timeline to when it is. I agree we need more options
@@LifewithParkinsons I live in Canada, but got my Cue1 from London. It is now available in Spain and Ireland, next being USA.
Can you make similars gloves for me David and i pay you what you want?
Hello, I am sorry, I cannot do that. This is a do it yourself project, best to find someone local who could assemble the parts for you. Here is a link to the UA-cam Channel and video that has all the instructions. Thank you for understanding.😊😁😀
www.youtube.com/@pdvibrationtherapy
ua-cam.com/video/1PfsVjnPAuQ/v-deo.html
Hey David! Providing you with a link to another guy who is also working on his own glove too. Hope things are going well with you. Have not had time to watch your update videos, but, this one that I have watched looks promising for you!
ua-cam.com/video/iLFuR8OmBbg/v-deo.html
Thanks Owen, I subscribed to the channel you sent me in case he has more updates. I changed the vibration pattern on the gloves a few days ago, definitely getting more benefit. Thanks. 😀😀😁