Fujimi/Scaleproduction: Mercedes Benz 190E EVO II Touring Full Build Step by Step

Поділитися
Вставка
  • Опубліковано 30 вер 2024
  • Full Playlist: • Mercedes-Benz 190E EVO II
    Links to the products i use are bellow
    ✖ Visit my webshop(for euopean vieuwers: www.thescalemo...
    ✖Or Amazon for US vieuwers: www.amazon.com...
    ✖Want to support this channel, why not become a patron!
    www.patreon.co...
    ✖ Shopping links for a lot of the tools i use:
    My Workbench:
    www.hobbyzone.pl/
    www.thescalemo...
    My airbrushes and setup:
    1BAR(14PSI) of air pressure through the gun.
    amzn.to/2xGv8JT
    amzn.to/2xHccdW
    I use a Eurotech 20A Aircompressor
    A Spray booth i recommend:
    amzn.to/2yp5T25
    amzn.to/2J8l1n1
    The booth i made myself:
    • How To: Build a Spray ...
    Zero paints store locator:
    www.zero-paints...
    Grey Primer: www.thescalemo...
    Clear: www.thescalemo...
    Colors: www.thescalemo...
    General Tools: amzn.to/2xGdDOB
    Sanding sticks:
    amzn.to/2JDydEt
    amzn.to/2l1FWOV
    Tape:
    amzn.to/2xGHWQk
    amzn.to/2yplZZE
    amzn.to/2ypqUKa
    amzn.to/2yp9IEH
    Tape with plastic sheet: amzn.to/2hIy82f
    Knife:
    amzn.to/2xGMvz4
    amzn.to/2ypq3sT
    amzn.to/2yxGC6J
    Tamiya Weathering Set: amzn.to/2Aj0n07
    Cutter: amzn.to/2xHd6qQ
    Cutting Mat: amzn.to/2znJ0dT
    Clearparts glue: amzn.to/2EQMTyt
    CA Gleu: amzn.to/2zb0jhg
    Plastic Cement: amzn.to/2za8KJX
    Respirator: amzn.to/2yn8rfA
    Gloves:amzn.to/2ypuTqd
    Tweezer: amzn.to/2hIxj9F
    Brushes: amzn.to/2xG77r3
    Decals Solutions:
    amzn.to/2ylIPzQ
    amzn.to/2ypuRP7
    Panelline scriber:
    amzn.to/2hGDElS
    amzn.to/2gXsrOl
    amzn.to/2JmKDRH
    amzn.to/2Lxp1if
    amzn.to/2MbulJl
    amzn.to/2Mb9cyI
    amzn.to/2M6vu4V
    Permanent markers: amzn.to/2zptYoa
    amzn.to/2z8WREd amzn.to/2zFEgjS
    Sanding sponges: amzn.to/2xGMKtY
    amzn.to/2xPVsq8
    Spray stand: amzn.to/2z9Y2D9
    Parts holders: amzn.to/2ypbjtT
    Panelline accent color: amzn.to/2xGB7OA
    BMF: amzn.to/2EYoP8k
    Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
    Hand Drill/Pin vice: amzn.to/2IwW58I
    Hole Punch:
    amzn.to/2ELyvTk
    amzn.to/2IQJMEf
    amzn.to/2EOL944
    amzn.to/2GYgbwa
    Camera Gear:
    GoPro: amzn.to/2DDfRgz
    Head Strap: amzn.to/2DHiiio
    Links
    www.thescalemo...
    plamoz.com/
    www.scalemotor...
    / yellowhouseclub
    www.uscp-ua.com
    Check out Scaled world and get your builds featured!
    scaledworld.net/
    / scaledworld
    In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds,unboxing reviews and all sorts of other scale model related stuff.
    If you have any suggestions or questions at all just post a comment or email me at thescalemodelingchannel@gmail.com
    Also don't forget to like us on Facebook for project updates and news.
    / thescalemodelingchannel
    / thescalemodelingchannel
    Music copyright ® by UA-cam Audio Library
    &
    ampletunes.com/
    We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites

КОМЕНТАРІ • 432

  • @TheScalemodelingChannel
    @TheScalemodelingChannel  6 років тому +33

    Yes, i know the thread patrn on the rear tires is not correct. its fixed now ;) Thanks to everyone who noticed it.

    • @bobsmithinson2050
      @bobsmithinson2050 5 років тому +2

      The Scalemodeling Channel it’s tread man. 👍 beautiful build here

    • @ちるの9
      @ちるの9 5 років тому

      absolutely love your content, keep It up 👍

    • @jesusblanco8363
      @jesusblanco8363 5 років тому

      Hey can you please send me and email of all the products and materials that you use for make your model cars because I want to be able to make mine almost the same way that you use them I don't care how much there is I just want to get the list so I can purchase them piece by piece. You're an inspiration to me and I would like to make the cars the same way and some money on the side, if you can do me that favor I will be forever greatfull

    • @mimod583
      @mimod583 5 років тому

      @@ちるの9 ٨٨خخممممممممممنننننننننننننننننممممممممننمننهههخخنننننننننننتتتتتتتتتنننننننننننننننننننننننننمنمممممخهننهننننننننننننننتتننننننننننننننهخهههههههههههههههههههههههههههههننهننننههههههخخمنننننههنهههنننمممممخمخخخخخخخخن٧هه

    • @Uilrub
      @Uilrub 3 роки тому

      Can u do a semi truck pls 😢

  • @dannymontoya9469
    @dannymontoya9469 6 років тому +64

    I have a thing for wagons. This is super awesome,love it!

    • @davidpalomo7786
      @davidpalomo7786 5 років тому +1

      I know right! It's just way better to look at than any other car

  • @ronwhite8254
    @ronwhite8254 6 років тому +78

    Wow. You do amazing work. I enjoy watching your vids. Keep up the fantastic builds!

    • @dermok99
      @dermok99 6 років тому

      Wow great work the paint is epic

  • @BigDapPacino
    @BigDapPacino 5 років тому +5

    When I was a teenager , one of my cousins had a Mercedes Benz 190E with the AMG widebody kit, gold BBS wheels, Automatic sound system and the Alpine sound system with two 10 inch subwoofers in the trunk...her Godfather bought it for her 18th birthday from a car dealer who customized it for a NFL player who decided at the last minute...not to purchase it....sweet ride...you definitely captured the custom aftermarket style of the car that inspired the VIP Culture of the late 90's to early 2000's!

  • @RcNickster709
    @RcNickster709 6 років тому +42

    Very nice.. You certainly got the touch when doing these models..Love those details bud..Thumbs up from me.. :)

  • @papivale7775
    @papivale7775 6 років тому +64

    I dont know how the fk i ended here, but this is really awesome! U are amazing 👍

  • @dinsism
    @dinsism 6 років тому +11

    weird satisfaction of seeing this being constructed

  • @GuitardedAndBroke
    @GuitardedAndBroke 6 років тому +12

    So perfectly done!!! Your attention to detail is amazing!!! I would have liked to see the finished base again but I'm not really complaining. :)

  • @krugmeister7301
    @krugmeister7301 4 роки тому +1

    THAT'S A AWESOME BUILD AND MODEL KIT FROM FUJIMI..😍😍😍😍😍

  • @weissfussindianer
    @weissfussindianer 6 років тому +6

    really nice work. Only one thing to recomment: The Tires are in the wrong direction. next time then... ;-)

  • @matthewhall435
    @matthewhall435 2 роки тому +1

    First time watching your channel ! Wow the detail is so impressive ! Building models as a kid I never thought you could do them this good well done ! One question I have is how do you keep your ca glue nozzle so clean !

  • @tarzaan2603
    @tarzaan2603 6 років тому

    ....... Holy fuck......... Dam....... I had no idea people were THIS good at building models!

  • @mazrx84kat13
    @mazrx84kat13 6 років тому

    A bro where did you find the benz s/w body? Been lookin around for something different n kool and can't seem to find a thing! A benz or beemer s/w would make a prefect project.

  • @mybnz190
    @mybnz190 2 роки тому

    So proud of your successful views and your channel skyrocketing. I remember your 1st vid, and u saying u were taking a chance starting this full time youtube page.

  • @actionmethod
    @actionmethod 6 років тому

    I liked everything but the BBS LM wheels, they are unprportionally big for the car.

  • @ДаданДаданский
    @ДаданДаданский 6 років тому

    that`s all great but can someone explain me what the fuck is W201 TOURING???

  • @worstofthebeast
    @worstofthebeast 5 років тому +3

    "add to play 2x speed list."

  • @Venomstrikesback
    @Venomstrikesback 5 років тому +1

    This is excellent work exact precision. Very glad find this channel true Craftsman

  • @bugbomb8048
    @bugbomb8048 4 роки тому

    Wow.... super nice ..... my real 190 had independent rear suspension

  • @DexMaster881
    @DexMaster881 6 років тому

    God you almost gave me a stroke.
    From the thumbnail I thought some idiot took a real Evo II and made a Station wagon out of it.

  • @gunightw538
    @gunightw538 5 років тому +1

    I miss the midnight club 3

    • @gunightw538
      @gunightw538 5 років тому

      www.rockstargames.com/midnightclub3/

  • @NBMSCH
    @NBMSCH 6 років тому +1

    ...I needed to pause the video just to say.. THAT'S AN AMAZING AND SO PROFESSIONAL WORK!... keep going!

  • @GK-Modelcar-Universe
    @GK-Modelcar-Universe 6 років тому +2

    Great Work! I like the BBS Wheels!

  • @emilaltanov7807
    @emilaltanov7807 5 років тому

    Can somebody tell me if a 190e wagon exists but if it doesnt can tou tell me where to get this model from

  • @Thor86-
    @Thor86- 6 років тому +1

    190 E EVO is a absolutely Legend! 👑👌🏼🤙🏼

  • @刘培森-d8p
    @刘培森-d8p 5 років тому

    May I ask what the difference is between 71063 and 70997?

  • @polishedsolutions9825
    @polishedsolutions9825 4 роки тому

    Only just subscribed to your channel but have learnt so much in 3 videos....been modelling since i was a kid and have continued to do it into my 50's....could i ask where u purchase the extra shell and parts from
    Cheers
    Steve

  • @robertortega32
    @robertortega32 4 роки тому

    Your very good at building theses models I would like learn to do this

  • @justwondering5540
    @justwondering5540 6 років тому

    Looks like you forgot to put springs and shocks on it but your work is vary good .

  • @TShatov
    @TShatov 6 років тому

    Very cool! And I express about body color! It's great!:)

  • @mazrx84kat13
    @mazrx84kat13 3 роки тому

    Say my friend where exactly did you find that Benz Wagon?? Been looking for something kool like that!.

  • @chauffeurmarco
    @chauffeurmarco 10 місяців тому

    That is a hell of a nice blue. The pigmentation in it is to die for

  • @wmstong1967
    @wmstong1967 3 роки тому

    Hi can you share how to make clear windshield many thx

  • @jaywalker3485
    @jaywalker3485 5 років тому

    Pretty sure you're supposed to start spraying the air brush before you actually paint the car to release any dried paints from the tip of the brush, to prevent any little bubbles in the paint job. Take the roof for example. Imperfections are easy to spot

    • @TheScalemodelingChannel
      @TheScalemodelingChannel  5 років тому

      I’m pretty sure that is what i’m doing....
      facebook.com/587777817976945/posts/1628438867244163?sfns=mo
      facebook.com/587777817976945/posts/1629356197152430?sfns=mo
      But i’m sure you know better ;)

  • @Kacicka999
    @Kacicka999 6 років тому +7

    now i want to build e30 or e34...

  • @elrafaelo4417
    @elrafaelo4417 6 років тому

    Hey bady how can i buy some cars and paint like you?

  • @Tcmodelworks
    @Tcmodelworks 2 роки тому

    You’ve probably been asked hundreds of times, but what do you do with the original parts you don’t use when you build one of these that has a complete new body?

    • @TheScalemodelingChannel
      @TheScalemodelingChannel  2 роки тому +1

      Safe them for later. Use them for tests. Or spare/custom parts on other builds

  • @talha5750
    @talha5750 5 років тому +1

    Model cars is very expensive in Turkey :(
    1/24 welly megane = 90 turkish money

    • @olibob295
      @olibob295 5 років тому

      £12 isn't alot??

    • @talha5750
      @talha5750 5 років тому

      @@olibob295 1 pound = 7,46 TL (turkish lira-money)

    • @olibob295
      @olibob295 5 років тому

      @@talha5750 Oh Google said it was equal to 12£

  • @fangirl988
    @fangirl988 5 років тому

    Absolutely brilliant, for me I would rather you made the model kit out of the box because that’s what most people would do, if I was gonna buy this kit , yes it looks better but to be honest only half of the model kit was used, but that’s just me

    • @TheScalemodelingChannel
      @TheScalemodelingChannel  5 років тому

      The thing is. It was not about building the model out of the box. It was about building this model. Using half of the parts out of the box😜

  • @R-Haw
    @R-Haw 5 років тому

    Where did you get the seatbelts from or were they in the kit?

  • @mersovod1800
    @mersovod1800 5 років тому +1

    W201 and 190E AMG has never been a coupe

  • @brainokoner6250
    @brainokoner6250 4 роки тому

    Зачетный мерен получился. 😊👍

  • @pauljohansson7697
    @pauljohansson7697 5 років тому

    I just subscribed to your channel

  • @moesscalemodelbench9688
    @moesscalemodelbench9688 3 роки тому

    Did you do any sanding to the clear coat? That paint job is beautiful

  • @BDYUCA
    @BDYUCA 5 років тому

    i want to make one but i feel that it would be to hard

  • @oggarage9388
    @oggarage9388 3 роки тому

    Congratulations on the million 👀🔥🤙

  • @Zaekr2111
    @Zaekr2111 6 років тому

    Hi! What did you use at 12:10 for weathering? Thank you in advance!

  • @RenatosilvaMinis-Games
    @RenatosilvaMinis-Games 5 років тому

    Muito top

  • @manufefnandez7652
    @manufefnandez7652 5 років тому

    Como me gustan stas cosas yo e echo un par de ellos

  • @funkolog
    @funkolog 6 років тому

    front hood mb badge as the cherry on cake

  • @Chimi1993
    @Chimi1993 4 роки тому

    I used automotive urethane on reduced it 50/50 and man i’ve never been happier a qt for $40ish bucks after tax.catalyzed @ 2:1 and reduced @ 1:1 its really thin so im careful and i i used a Tekna Gravity feed gun.great work man

  • @bma030471
    @bma030471 4 роки тому

    The kit came with a separate body?

  • @maksimkorchagin2695
    @maksimkorchagin2695 5 років тому

    Я блять уверен что он красит в микроволновке

  • @UU-dq6je
    @UU-dq6je 6 років тому

    Pfuiiiii combi van only Limousine and coupe

  • @tobprod.1973
    @tobprod.1973 6 років тому +3

    Потрясно!

  • @brandonsmisek
    @brandonsmisek 6 років тому

    I am going to give a Yes on this one. well done.

  • @seandesurci7389
    @seandesurci7389 3 роки тому

    Still doing fantastic builds I see

  • @timschubert8624
    @timschubert8624 6 років тому

    18 inch wheels would have been enough

  • @theomar2376
    @theomar2376 6 років тому

    is there a brand of these cars you get?

  • @danygzz5666
    @danygzz5666 5 років тому

    You sell that car or where can i buy one

  • @erenkocaoglu1640
    @erenkocaoglu1640 5 років тому

    Nwrden alıyorsun bunları bende almak istiyorum

  • @boricuadaddy87
    @boricuadaddy87 6 років тому +8

    Omg brother that benz came out so wicked loving it bro 👍👍👍💯💯

  • @invictusmindless
    @invictusmindless 6 років тому

    As the owner of '89 Merc 190E i'm amused and extremely satisfied with this video, but kinda upset that W201 wagons never existed in reality.

  • @panispan582
    @panispan582 4 роки тому

    Great. Do you still have this shell?

  • @mathiass568
    @mathiass568 2 роки тому

    Your webpage doesn’t work and it say that the url is not secure

  • @djkennedy5452
    @djkennedy5452 5 років тому

    Hi mate what flocking do you buy / use ? .cool vids bro

  • @ernstfrisch
    @ernstfrisch 6 років тому

    Rear tires are mountet against direction

  • @alfred5028
    @alfred5028 5 років тому

    What's the airbrush gun you use?

  • @dwightbrady5872
    @dwightbrady5872 4 роки тому

    i have to say im speechless beautyful craftmans an awsome eye for Detail cant wait to see your next peace👍👍👍👍👍👍👍👍👍🎉🍾🎉

  • @jes9856
    @jes9856 6 років тому

    Cool as a full size car painter I find this amayzing and far more fun than the real thing I painted the shell of my Tamiya 1988 911 turbo in 2007! What am I thinking of I am defo getting it out again and probably need another couple thin coats ditching the black and switch to full on 80,s Guards red. I hope I can get it as good as yours. That clear coat is awesome. Keep it up will watch this channel man.

  • @Finne72
    @Finne72 6 років тому

    How did you make the BMW E 30 Touring body to match up with the MB 190? The bodywork looks absolutely seemless.

  • @drluiggi
    @drluiggi 6 років тому

    Always hate painting job, after this - need to try again. Amazing job and beautiful model. Sadly there is no W201 in wagon form or even better - coupe.

  • @keanwayne8797
    @keanwayne8797 6 років тому

    are those wheels movable or is this for display purposes only? its so niceee

  • @PressurenFlames
    @PressurenFlames 6 років тому

    It is a shame that this car never has existed...

  • @wbcars
    @wbcars 6 років тому

    W!O!W! .. already like Mein! -:) BEAUTIFULL

  • @STIMUL8ED
    @STIMUL8ED 6 років тому

    Such a skillful assembly and very pleasing/calming to watch ...you are a good man! Steady-hand/patient... #WellDone indeed!
    🚨👾🚨

  • @mereskimade
    @mereskimade 6 років тому

    I don't know why this showed up on my feed but what a wonderful treat! I was obsessed with models as a kid but haven't touched them in years. This was really inspiring to give it another try! Don't think I'll get quite as details as you though haha. Amazing work, subscribed!!

  • @feldstecher
    @feldstecher 6 років тому +1

    Berliner Kennzeichen... NETT! :)

  • @stanleyalford7861
    @stanleyalford7861 6 років тому

    Front two tyres are on backwards and it's killing me!

  • @B501R
    @B501R 5 років тому

    Great! But no matter how glowingly detailed finished results, the plastic material is somehow still detected....compared with the diecast metal finished glow.
    Thats why I prefer diecast model over plastic model any day.

  • @nomadautodidact
    @nomadautodidact 6 років тому

    Looks like a really satisfying/really expensive hobby. Guess its cheaper than building a real car though.

  • @uscar17
    @uscar17 6 років тому

    Dang. I was expecting something cool, but you're just something else. Your work is f**king amazing

  • @coupecoupe9422
    @coupecoupe9422 6 років тому

    190 tekrar yapılsa keske

  • @Sethi1st
    @Sethi1st 6 років тому

    What do you use to glue the seatbelt ?

  • @saltydog888
    @saltydog888 6 років тому

    I could get in and drive that.

  • @carryyouth8969
    @carryyouth8969 4 роки тому

    How to build the front axle

  • @sv924
    @sv924 5 років тому

    Perfecta que buena mano. Ojalo yo pudiera hacerlas igual, soy un gran fan del modelismo, pero no soy capaz de que me salga bien. 😕😕😕😕😭😭😭😭

  • @krazykunt
    @krazykunt 6 років тому

    i drove like 6 190e´s yet but i never saw one like this is this only in usa or have i missed out on anything yet.coming from germany by the way.nice work

  • @kaitunbokbok
    @kaitunbokbok 6 років тому

    Why the song so sad??? your ability is MARVELOUS!

  • @EdwardAMG
    @EdwardAMG 6 років тому

    HOLYMOLY That looks SICK!!! I always loved the 190E WOW amazing work good job! subscribed!

  • @NibanoTransmontano
    @NibanoTransmontano 2 роки тому

    It would be nice if was a mercedes 190 SW edition

  • @micheldubuis7597
    @micheldubuis7597 5 років тому

    Je ne sais pas si vous comprenez le français , j'adore les miniatures que ce soit a l'échelle 1/43 , 1/24 et 1/18 , ma préférence étant le 1/43è car j'ai moi même refais des miniatures mais pas à l'aérographe car je n'y arrivais pas , j'ai donc travaillé avec des bombes de peintures acryliques , j'ai également transformé des modèles en les découpant pour en faire des cabriolets , qui n'existais pas sur le marché , cela me fait plaisir de vous voir travailler , thank you for vidéo.

  • @THIRSTYGUMS
    @THIRSTYGUMS 6 років тому

    VERY nice! how about adding some realistic dirt dust rust scratches etc?

  • @elisur216
    @elisur216 4 роки тому

    Beatifull, very very beatifull

  • @biljancanin
    @biljancanin 6 років тому

    Nice work, but that car was never produced anything else but a sedan, but nice model

  • @23Miniatures
    @23Miniatures 4 роки тому

    Wow, thanks for this step by step video. It’s really great for newbie like me!

  • @brabus4
    @brabus4 5 років тому

    Phenomenal! Can't believe there's people who actually dislike this. 🤔

  • @JDSUMNUT
    @JDSUMNUT 6 років тому

    Wow...I never noticed the potential of those benz wagonz... 😎😎😎

  • @CanalOcioar
    @CanalOcioar 5 років тому

    genius of scale models!!!

  • @ohaugustine
    @ohaugustine 6 років тому

    The last time i build something to scale was a blackhawk and it finished 3 years after uncolored and i destroyed it a week later :(