My charger 08 blower quit working , changed resistor still not working ,,guess a new blower is next ..i hope thats the problem...thanks great video..wish i found this video sooner
Ok here is my question, I have a 2008 Dodge Carger, one day I was sitting in my car and the air condition, blower was coming on when I operated the gauge was working great. A few weeks later I went to it on and its act if it's not getting any power. How can or would I be able to know if it's the blower motor gone bad, or the resistor has went bad or if it's getting any power. Cause that what it seems as though it's not getting any power. I've check the fuse and they are not blown. Could it be a fuse module gone bad? I dont know I need help.....
Thanks, do we need to remove the resistor? What are part numbers for both parts? ( ugh, it will be pain to remove these, lol.). I did my blend door actuator and it sucked although this looks easier, at least I don’t have to remove the glove box. I might have to ask my wife to remove these screws ( she’s much smaller than me and she likes doing things).
In the description of the video there are links to both parts. You don't have to replace the resistor unless it's burnt out, but it's a good idea if you're installing a new blower motor.
I replaced the actuator with a new one. The ac is still blowing cold on driver side and medium on the passenger side. I had a code that read door too large or something like that. Could it be the motor or the resistor? Cold air is coming through the driver side but something is definitely not working properly.
It’s not the resistor. It’s likely a blend door actuator. There are several of them. It’s going to be the actuator for the side that’s having the issue. Sounds like the passenger side for you.
Will this part stop you ac from blowing cold & your heater from blowing hot .I would always hear a loud clicking noise when changing from cold to hot now that the noise has stopped so has my heater & air . I need help anyone please
You need to replace your AC actuator. The clicking noise are the gears in the actuator grinding is grinding against each other. I had the same problem not too long ago. It's cheap And fairly easy to replace yourself.
Hey man I was gonna comment on ur other video but its 2 years old dont think you would get the notification but I'm currently doing a duromax motor swap on the Yamaha g1 golf cart what left of belt did you use.. The motor seems to be in the same place as where urs is.. Any help would be greatly appreciated cant seem to find a belt longet than 44"
Just the Video I need!!! Thank you. You should come over and checkout my latest project, 1977 GMC K25 Long box Square Body BEAST!! Might need this Video for my personal Charger!!!
Thank you so much, thumbs up
Will these be in the same location for my 2015 dodge charger
I really appreciate the video and fix my problem
My charger 08 blower quit working , changed resistor still not working ,,guess a new blower is next ..i hope thats the problem...thanks great video..wish i found this video sooner
Great video,, But, which year(s) Charger would this cover?
Ok here is my question, I have a 2008 Dodge Carger, one day I was sitting in my car and the air condition, blower was coming on when I operated the gauge was working great. A few weeks later I went to it on and its act if it's not getting any power. How can or would I be able to know if it's the blower motor gone bad, or the resistor has went bad or if it's getting any power. Cause that what it seems as though it's not getting any power. I've check the fuse and they are not blown. Could it be a fuse module gone bad? I dont know I need help.....
WOULD TAKE SOME ELECTRICAL TROUBLESHOOTING. ALSO, YOU WILL NEVER HAVE A BLOWN FUSE FOR AN INTERMITTENT PROBLEM.
Thanks, do we need to remove the resistor? What are part numbers for both parts? ( ugh, it will be pain to remove these, lol.). I did my blend door actuator and it sucked although this looks easier, at least I don’t have to remove the glove box. I might have to ask my wife to remove these screws ( she’s much smaller than me and she likes doing things).
In the description of the video there are links to both parts. You don't have to replace the resistor unless it's burnt out, but it's a good idea if you're installing a new blower motor.
I replaced the actuator with a new one. The ac is still blowing cold on driver side and medium on the passenger side. I had a code that read door too large or something like that. Could it be the motor or the resistor? Cold air is coming through the driver side but something is definitely not working properly.
It’s not the resistor. It’s likely a blend door actuator. There are several of them. It’s going to be the actuator for the side that’s having the issue. Sounds like the passenger side for you.
Will this part stop you ac from blowing cold & your heater from blowing hot .I would always hear a loud clicking noise when changing from cold to hot now that the noise has stopped so has my heater & air . I need help anyone please
You need to replace your AC actuator. The clicking noise are the gears in the actuator grinding is grinding against each other. I had the same problem not too long ago. It's cheap And fairly easy to replace yourself.
Is this the same for the 2007 Dodge magnum SXT?
Yes
Super helpful, thanks.
You’re welcome! Thanks for watching!
Good video 🇺🇸
Kick ass Video: Will that work on the 2018 as well? Have a sick one and we're expecting 0 degrees this weekend ;) Thanks!
Do you know how to access the blend door. I seam to have a jam
You must remove the glove box, it’s to the left of it.
ua-cam.com/video/EX1H9JE6FNY/v-deo.html
Thank you sir
Very helpful!!!!
Hey man I was gonna comment on ur other video but its 2 years old dont think you would get the notification but I'm currently doing a duromax motor swap on the Yamaha g1 golf cart what left of belt did you use.. The motor seems to be in the same place as where urs is.. Any help would be greatly appreciated cant seem to find a belt longet than 44"
Sorry for the late reply. If I remember right, the belt was ordered off eBay.
i make belts longer than 44" whatever your looking for in belts look for in gates brand we make belts for everything
Just the Video I need!!! Thank you. You should come over and checkout my latest project, 1977 GMC K25 Long box Square Body BEAST!! Might need this Video for my personal Charger!!!