Has sparks just like the starter as well, just does not get past the first stage though before spooling down. Now, if Photon was given a jet turbine and "upgraded" the control box to enable stupid speed I would love to see that. I am far enough away the debris would not harm me, even if some does go into orbit. Would not do that in the living room though, unless he wants an entire house remodel in an instant.
SeanBZA - There is a theoretical speed limit of turbine blades due to the centripetal forces and speed of the blade tips creating sonic booms as they pass the speed of sound, the problem becomes one of metallurgy. Currently, turbine blades are grown as a single crystal of the metal they are made of, it is done in very strictly controlled conditions and takes an awful long time to grow a single turbine blade into a single crystal. I believe it's about a month or so. If they were made in the conventional manner, there would be many many crystals of the metal and when anything metallic breaks, it is because it separates the bonds between the crystal structure of the object, so that is why turbine blades are "grown" as a single crystal, so that there is nowhere for the turbine blade to crack. Also, jet engines actually run at much slower RPM speeds these days because they are bypass turbo-fan type engines, which is essentially a jet engine using the front turbine blades to push air around the outside of the turbine, rather than through it, meaning they can run at 1/10th of the speed, use MUCH less fuel, much less wear and tear, and provide more power than a jet engine that creates thrust from the air and fuel being burned and thrust out the back of the turbine. Short answer: It can't be done, the blades would detatch well before any exciting speed was attained, even IF you could jam enough air and fuel into the thing..........
Dont put it past the regular PETA. All someone has to do is say "I've programmed this computer to have emotion" and you can hear them already, shrieking about the inhumanity . . .
+Richard Harrold 36, there is no runway 00/18, it'd be 36/18 If you're gonna be a smartass, at least be smart about it, otherwise you're just an ass. ;)
that's how many large motors sound. actually the same physics is at work in the motor that is at work in turbofans and jet engines: noise created from air moving through enclosed spaces. Same kind of thing that gets those old fashioned mechanical sirens to work.
The air intake was covered by the floor because the motor was sitting upright. The power required to drive a centrifugal fan is proportional to the air flowing through it, therefore it was running unloaded. That type of brushed motor will overspeed without a load attached, causing excessive arcing on the commutator.
That's not how it works. The arcing is caused by the high speed of rotation (the "naked" motor was run without any load after all). This breaks the current through the windings very abruptly, causing a voltage spike because of the self-induction (probably a few thousand Volts). That's what causes the arcing.
+ChumpusRex actually the second motor looks like one from a Dyson upright, the spindle actually is the driveshaft of the brush bar pulley, while the impeller actually forms part of the motor itself. So you're not entirely wrong.
2:05: Starting Up the Portal 2:20: Priming the Core Reactor 2:30: Full Speed [ENABLE] Launching Time Travel Sequence ? Y/N 2:32: Y pressed | Opening Portal 2:37: [CAUTION] Overloading on the Portal, Engin in [CRITICAL STATE] 2:40: Portal turned [OFF], cause [OVERHEATING] - [EXPLOSION] Factor exceeded 95%
What a perfect idea for a new mini series. Even better, what better way to mark the grand return of Photonicinduction with a mini series. Keep up the good work, you rock.
photonic glad to see you back life was so boring without your vids missed the high voltages and of cause the destruction of mundane electronics all in name the science great vids keep them coming best regards mark
irrelevant but a few years ago he microwaved a computers motherboard while it was on, its still in his early vids on his channel somewhere.. a computer overloaded would be interesting to see on the dc side after the power supply as the power supply would just blow its fuse or die before anything happened to the motherboard ect id imagine however straight to motherboard dc overvoltage something would definitely pop how much it would take would be interesting to see :P
Would be better with one of those fake EVGA "3VGA" power supplys, as they don't have any protection to the motherboard, so we could see what it really does without the power supply cutting off. :)
Assembled Vacuum cleaner: Nought to pop in *36 seconds* *Max* power before malfunction is *3.438 W* *Peak* popping current is 21 Amps at 380Volts (thus a popping power of *8.754 W* *Cause* of failure: Probably *insulation meltdown and short circuit.* Vacuum cleaner motor without load (with thermal overload, twice): Nought to pop in *35 seconds* *Max* power before malfunction is *~950 W* *Peak* popping current is 12 Amps at 345Volts (thus a popping power of *3.717 W* *Cause* of failure: *Thermal overload.* Vacuum cleaner motor without load (without thermal overload): Nought to pop in *34 seconds* *Max* power before malfunction is *~984 W* *Peak* popping current is 47 Amps at 272Volts (thus a popping power of *14.050 W* *Cause* of failure: *Brush flash over.*
+Photonicinduction Yes, and there was one frame where it showed 87.54 (at least that's what I saw). Of course, that seems quite unrealistic. Okay then, I'll change that^^
I just noticed, that the numbers don't add up. 47A*272V is roughly 12kW, not 14kW. Does your meter measure apparent power? (wait, even then that wouldn't work out). Does it have a delay between showing Voltage/current and calculating power?
Absolutely not mate, you're my favourite youtuber, so excited that you've got things sorted enough to be uploading more! DM me for my number and if you're ever up in Leeds I have beer with your name on it! Keep up the great work buddy
+Photonicinduction while you may think they're bad, your old ones were amazing, not seen a bad one yet, I'm no sparky but I learn loads from your videos, you helped me learn ohms law and all sorts, your entire accent (being a Yorkshireman its very different from mine) is hilarious when you rant at stuff, keep up the good work, and seriously I mean it, I have beer for you if you're ever in Leeds, would love to sit and have a pint with the legend that is Mr photonic induction!
nope ! freezing determined by boiling temperature of the gas and motor is asynchronous so it will not go any faster. hairdryer on the other hand might be funny ;)
"I've removed this offending article known as thermal overload. Now perhaps we can try it again." You're just hilarious :D
7 years have passed, I came back just to hear this again :D
2:52
I got to that part of the video and read your comment as i was watching lol
3:04 “Hoover motor taking off again”😂😂😂😂
I swear that sounded just like a Jet Engine spooling up, that alone is awesome
Top marks for the destruction sparks and fire
Has sparks just like the starter as well, just does not get past the first stage though before spooling down.
Now, if Photon was given a jet turbine and "upgraded" the control box to enable stupid speed I would love to see that. I am far enough away the debris would not harm me, even if some does go into orbit. Would not do that in the living room though, unless he wants an entire house remodel in an instant.
But will the jet engine destroy itself before the house takes off? XD
SeanBZA - There is a theoretical speed limit of turbine blades due to the centripetal forces and speed of the blade tips creating sonic booms as they pass the speed of sound, the problem becomes one of metallurgy. Currently, turbine blades are grown as a single crystal of the metal they are made of, it is done in very strictly controlled conditions and takes an awful long time to grow a single turbine blade into a single crystal. I believe it's about a month or so.
If they were made in the conventional manner, there would be many many crystals of the metal and when anything metallic breaks, it is because it separates the bonds between the crystal structure of the object, so that is why turbine blades are "grown" as a single crystal, so that there is nowhere for the turbine blade to crack.
Also, jet engines actually run at much slower RPM speeds these days because they are bypass turbo-fan type engines, which is essentially a jet engine using the front turbine blades to push air around the outside of the turbine, rather than through it, meaning they can run at 1/10th of the speed, use MUCH less fuel, much less wear and tear, and provide more power than a jet engine that creates thrust from the air and fuel being burned and thrust out the back of the turbine.
Short answer: It can't be done, the blades would detatch well before any exciting speed was attained, even IF you could jam enough air and fuel into the thing..........
Your profile pic is a peace of shit
thinked abt why didnt it explode onto itself xD
If there was a PETA for electronics they'd hate this guy
Dont put it past the regular PETA. All someone has to do is say "I've programmed this computer to have emotion" and you can hear them already, shrieking about the inhumanity . . .
Games With Nic lol
@Games With Nic Griffen
PETE!
People for the Ethical Treatment of Electronics.
0:58 Ok Hoover, you are cleared for take-off down runway 223...
lol
Omg, lol!!!
Just to point out, the maximum number for a runway is 35. They're numbered in tens of degrees clockwise from magnetic north.
+Richard Harrold 36, there is no runway 00/18, it'd be 36/18
If you're gonna be a smartass, at least be smart about it, otherwise you're just an ass. ;)
***** List of things you don't say after someone tells a joke.
WHEN THE VTEC KICKS IN
Yo
When a plane takes off
DANGER TO MANIFOLD
THE VTEC WOULD FUCK MURDER THE MOTOR UP
@@ashwantnaidu9888 do you know what a joke is
0:55 primary fuel pump on
0:57 starting generator enabled
1:05 engine spooling up
1:23 X-feed on
1:33 Foreign object ingestion...💀
1:34 pls edit in plane crash sfx
A Drone Lol
That last noise was horrific.
1:33 engine flameout
Bruh that’s funny
Neighbors be like "Is that a fucking Jet taking off?"
lmao XD
Lol 😂
Neighbors be like, "Is that a fucking boeing 747-8 taking off?"
No hes overloading vacuums again
Said the kid who watches his videos
I watch some russian channels where they fire up soviet jet engines in residential neighborhoods lol
the gurgling sound it makes at 1:32... LOL
😂
Sounds like COD zombies
Beerrrrerepp
That's what i think a black hole sounds like
Sounded like a jet engine spooling up
I was about to say the same thing. sounds cool.
Iiiiiiiieeeeeeeeeeeeeee! brlbbblbblbbmbbb....
that's how many large motors sound. actually the same physics is at work in the motor that is at work in turbofans and jet engines: noise created from air moving through enclosed spaces. Same kind of thing that gets those old fashioned mechanical sirens to work.
indeed
Exactly my thaught to - really cool sound!
The vacuum cleaner was more like "until it poops"
jaja
LEL
Wow, that second motor was only at 260V when it started flashing over - really bad tolerance for a 240V device!
Take a look, there's a quick flash at ~255
I think it's because there's no mechanical load attached to the motor, so it spins faster than normal
The air intake was covered by the floor because the motor was sitting upright.
The power required to drive a centrifugal fan is proportional to the air flowing through it, therefore it was running unloaded.
That type of brushed motor will overspeed without a load attached, causing excessive arcing on the commutator.
I saw sparks at 170-180v
Actually I don’t think there was a spark at 180
Sounded like a jet engine spooling up.
« Bj1455 ready for takeoff »
Sound like a Mercedes 0405G bendy bus engine
air Transformer flight 24050 your clear for takeoff
Hoover 2000 ready for takeoff
sounds like a jet engine haha
it is a jet engine but without fuel
obviously, it sucks air XD
Until 1:31 where it sounds like someone farting in the bathtub 😂
Ikr 🤣
Vvvvvvvrrrrrrrrvvvvrrr
Nr 234
Excellent execution. That vacuum released the smoke very quickly.
Those roller bearing still do a great job at those speeds.
The armatures are surprisingly close to arcing at 240 V. Second motor started at 260!
That's not how it works. The arcing is caused by the high speed of rotation (the "naked" motor was run without any load after all). This breaks the current through the windings very abruptly, causing a voltage spike because of the self-induction (probably a few thousand Volts). That's what causes the arcing.
The 2nd motor was unloaded, so would have been overspeeding massively. These motors are designed to run with the load of the impeller.
+ChumpusRex actually the second motor looks like one from a Dyson upright, the spindle actually is the driveshaft of the brush bar pulley, while the impeller actually forms part of the motor itself. So you're not entirely wrong.
RODALCO regards:)
the red vacuum cleaner stopping suddenly at the end was one of the funniest things I've ever seen
It's funny how most UA-camrs practice safety in their videos and then there's this man: the king of "osha is a suggestion"
It's not OSHA in his house. He calls them the OSHM, as he doesn't believe in their existence.
1:23 - When mom tells you to vacuum but you want to get it done faster.
2:05: Starting Up the Portal
2:20: Priming the Core Reactor
2:30: Full Speed [ENABLE] Launching Time Travel Sequence ? Y/N
2:32: Y pressed | Opening Portal
2:37: [CAUTION] Overloading on the Portal, Engin in [CRITICAL STATE]
2:40: Portal turned [OFF], cause [OVERHEATING] - [EXPLOSION] Factor exceeded 95%
So *that* is why we don't hear from him anymore. He just produces content in the future now!
(After 2020, makes total sense to me :-) )
3:34 then you die
Lol
Sounds like a aircraft APU :-)Nice video as always, thanks mate!
What a perfect idea for a new mini series. Even better, what better way to mark the grand return of Photonicinduction with a mini series. Keep up the good work, you rock.
I cant see the video. Its says 4:04
i see what you did there xD
You mind fucked us all
Any pilots listening to this thinking this is an engine start and kept waiting to hear the fuel light off in the turbine?
Yep 👍
That noise when it conked out. Bloody nearly wet myself laughing 🤣. Thanks I needed that
Can't stop watching your videos, keep em coming! Thanks
God I miss this guy!!!
Hey! Great news!
Well he’s back
I think it was missing a pair of Adam Savage lips on the second one.
hahaha
Oh am I missing a bit of lip? lol.
I don't get it
Levitation Machine/ Elevator of Death Episode that was shown on.
photonic glad to see you back life was so boring without your vids missed the high voltages and of cause the destruction of mundane electronics all in name the science great vids keep them coming best regards mark
yeah i love your comeback
lol cheers
I love the fact he does it in his living room. Exactly zero fucks given lol!!
At 2:39 I expected it to go back in time and disappear.
When I was about 14, I plugged a 2 inch speaker into the 120 volt mains. POP!! Love your stuff...
Always good to revisit these videos from time to time.
Ah those famous words have returned. "until it pops"
That first vacuum was almost just like a cartoon where it flickers with the sound and then puffs out some smoke from the rear
It's so good to see videos from you again!
that was badass man god im so glad to see new uploads from you again!!
THE MAN
THE MYTH
THE LEGEND
THE METH
THE PINT CAN STELLA
Arnold rimmer
This is going to be my new favorite series. Would be cool to see a phone or a computer screen overloaded.
irrelevant but a few years ago he microwaved a computers motherboard while it was on, its still in his early vids on his channel somewhere..
a computer overloaded would be interesting to see on the dc side after the power supply as the power supply would just blow its fuse or die before anything happened to the motherboard ect id imagine however straight to motherboard dc overvoltage something would definitely pop how much it would take would be interesting to see :P
Would be better with one of those fake EVGA "3VGA" power supplys, as they don't have any protection to the motherboard, so we could see what it really does without the power supply cutting off. :)
You are an absolute madman in the best way possible.
I've watched all your videos on here and you never fail to entertain!!
Assembled Vacuum cleaner:
Nought to pop in *36 seconds*
*Max* power before malfunction is *3.438 W*
*Peak* popping current is 21 Amps at 380Volts (thus a popping power of *8.754 W*
*Cause* of failure: Probably *insulation meltdown and short circuit.*
Vacuum cleaner motor without load (with thermal overload, twice):
Nought to pop in *35 seconds*
*Max* power before malfunction is *~950 W*
*Peak* popping current is 12 Amps at 345Volts (thus a popping power of *3.717 W*
*Cause* of failure: *Thermal overload.*
Vacuum cleaner motor without load (without thermal overload):
Nought to pop in *34 seconds*
*Max* power before malfunction is *~984 W*
*Peak* popping current is 47 Amps at 272Volts (thus a popping power of *14.050 W*
*Cause* of failure: *Brush flash over.*
Decimal point is one out on the first bit? the meter is in kW
+Photonicinduction Yes, and there was one frame where it showed 87.54 (at least that's what I saw). Of course, that seems quite unrealistic. Okay then, I'll change that^^
I just noticed, that the numbers don't add up. 47A*272V is roughly 12kW, not 14kW. Does your meter measure apparent power? (wait, even then that wouldn't work out). Does it have a delay between showing Voltage/current and calculating power?
The vacuum sounded like a jet engine spooling up... then someone threw an albatross into it. Looking foreward to more!
I think I am going to like this new series. Keep on poppin' mate!
I am so glad that you are back!
I'm liking this series!!
i thought it was parallel
I was waiting for the motor to fly out of there LoL
It was getting some pretty good RPM. I'll bet it spit it's commutator bars. That's why the sudden noise, and failure.
Man I've missed these. Pure goodness.
Great to have you back photon!
Sounded like my grandpa burping
LOL
That’s awesome
2:31 Make your vacuum cleaner more fun with some light show.
and add a llllllot more suction
Ya make fireworks by burning motor of vaccume, burned the cash in pocket. Buy ney tawsan worth, burned the motor to fire works your the man.
Cant wait for you to come back mate.
Yay Ima love this new series!!!! Keep up the good pops....
Until it pops Nissan Leaf....I wanna see that pull a wheelie like the scooter and do 0-60 in 1 second :)
Ever heard of FWD
@@Yorak_Hunt0----3 Ever heard of reverse
@@blower1 reverse wheelies
i want to see that ngl
@@blower1 That might be the first time I seen someone respond to someone on their own comment after 4 years
@@static_bolt The power of notifications! :D
when PI uploads, you like before you watch it, because Andy doesn't do a bad video..
laughing, I'm sure I do some really bad videos sometimes. Good news is they can all be replaced with better ones.
Absolutely not mate, you're my favourite youtuber, so excited that you've got things sorted enough to be uploading more! DM me for my number and if you're ever up in Leeds I have beer with your name on it! Keep up the great work buddy
+Photonicinduction Some old the old "bad" ones were some of my favourites tbh. Especially the mini rants about stuff on camera :)
+Photonicinduction while you may think they're bad, your old ones were amazing, not seen a bad one yet, I'm no sparky but I learn loads from your videos, you helped me learn ohms law and all sorts, your entire accent (being a Yorkshireman its very different from mine) is hilarious when you rant at stuff, keep up the good work, and seriously I mean it, I have beer for you if you're ever in Leeds, would love to sit and have a pint with the legend that is Mr photonic induction!
Subscribed. Instantly fan, must watch all episodes!
Great to see you back at it again with the overloaded gear, Photon!
Do you still have those crazy HV vacuum tube diodes? Would you consider completing the HV rectifier section -> HV Cap -> Pop things with DC?
It would be interesting to do that with an air conditioner. See if you can get super cooling power from it before it pops.
Tried it once... Thermal protection inside the compressor kept opening up, it got boring after 30 minutes ):
+REWYRED that's why you'd need to remove that thermal protection.
nope !
freezing determined by boiling temperature of the gas and motor is asynchronous so it will not go any faster.
hairdryer on the other hand might be funny ;)
I would of, but the thermal was internal to the compressor and therefore impossible to remove while keeping the unit intact.
+MRooodddvvv Why would it not get any faster, can you explain?
I was waiting for it to time travel. Awesome video
Never laughed sooooo much! You sir are a very funny guy, top marks, don't ever stop.....
The exposed vacuum sounds like a jet engine spooling up. :o
cant imagine what would happen to a tv
these videos are awesome, thank you for making them
My god this man always delivers!
That vacuum has bad gas ( 1:31 )
Jacob Marzynski THAT MADE ME LMAO
Please come back. You'd make it to a million subs in no time
He might even make it without coming back. That would be sooo awesome. :-)
Great to see you back bro
Ah great ending :) Good work as always Andy
but will it blend?
But will you shut the fuck up?
What about powering a blender off that?
But why are you everywhere? }:/
0:36 damn that hum, you deff know he's got some nice shit! HAHAHA!
think I just found my new favorite channel ! why do such a thing to a helpless little appliance you may ask......cause we can! great content!
Good to see you are back photonic!
What was your highest electric bill? And what is considered a normal electric bill in your area?
£400 is normal for 3 months
What wattage was that vacuum?
+A Person 1800 watts he said.
so, how many times did the police knock on to investigate you for growing plants in your attic ?
+Simon Johnny I think he works for United Lavs or something, and has these things to test for this purpose.
1:04 THE PLANE IS TAKING OFF!
Naked motor burnout one of the more impressive that I've seen. Welcome back photon! :D
I love seeing things (esp. vaccum cleaners!) becoming "destroid"!!! 😀
I want to see Until it pops variac
I like that idea!
Until it pops: Blender.
While it is running make an alcoholic drink
Will it blend ?
Can you please make `Until it pops - Ex Mother in-Law Edition` ?
Glorious. I love popping electronics. Awesome show
I like the new format, very straight to the point, just like the big viral youtubers are doing (carsandwater and hidraulic press channel for example)
When that baby hit 88 miles per hour...
I can't be the only one to think that the motor looked like it was going back to the future 😅
Glad your making videos again mate
Cheers
I enjoy these. Please do more.
My man photonic induction getting some algorithm action? unreal
1:46 top right, you have a air raid siren? :D
Never noticed that before. Would love a video about that!
Me too
I originally asked about this ;)
Indeed, 180 db ! it hurts
180 db for a Siren that small?
He's back as promised. Proper geeza!
That's some serious suction with a satisfying gurgle!
1:31 After I've been at Taco Bell
actually there would be flames also coming out
The pressure was just all too much for the hoover, its arse gave way and it soiled its bag at 1:31
so good to see your making videos again
The sound it made was awesome.
2:10 when j turn on ur ps4
Please label the meter so we know what's what
As a rule: Blue on top, Kilowatts. Red left, Volts. Green right, Amps.
Thank you Mr. Thermal overload, you are an important safety feature.
!lol! good one.
you've done it again, a blasted ringlette mate!
3:30 when you have too much taco bell
And you emit flames
G.E good enough
You are one sick man!!!! Keep up the great work. :)
good vid photon, nice to see you are back and well i will really enjoy your mini series until it pops see you in the next vid :)