@@danidin-h8j hi there ! Thanks for watching and enjoying my videos 😌. If you have oil around the pvc you can change the gasket from the pvc. But you have to be very careful because you can damage the plastic clips …. Work with heat to prevent breaking.
It's incredible...do you know how much is that gasket in Italy? 55 euros!!! And there is only one available in Italy!!! We Italians are a shitty people
Hi there. It could be a bit difficult, because the gasket is sometimes tight on the engine. But I recommend to lessen all the screws and then carefully raise the separator from each side a bit ..it should come off than. Number is 55215302
Thanks for this very interesting video.
Hello bro, first of all thank you for sharing your experience and info. I have exact same problem and i already ordered gasket thanks to you!
Yeah, pay attention to the torque…since I changed the gasket everything is dry
thank you very much for sharing 💯
Ohh wow. thank you!
Hello brother, great videos!! pleasure to just sit and watch them!
@@danidin-h8j hi there ! Thanks for watching and enjoying my videos 😌. If you have oil around the pvc you can change the gasket from the pvc. But you have to be very careful because you can damage the plastic clips …. Work with heat to prevent breaking.
@@danidin-h8j think you don’t have to change the head gasket if there’s nothing wrong… but maybe it’s time for the head gasket if you have oil there😛
Thank you!
Hello from Italy, i have the same problem on my 159 tbi...is there a gasket kit or i must put sylicone gasket paste? Thanks
Hi there - yea its a problem I think all tbi´s have that problem. You should order a new gasket. You get a new gasket.
www.alfashop.co.uk/products/4001050-159
It's incredible...do you know how much is that gasket in Italy? 55 euros!!! And there is only one available in Italy!!! We Italians are a shitty people
i have an other question...where did you find the torque specific?
@@maxromanin1745 I got the torque specs from a 4C Handbook....same engine
Was it relatively easy to remove the oil separator from the top of the engine? What is the part number of the gasket that needs replacing?
Hi there. It could be a bit difficult, because the gasket is sometimes tight on the engine. But I recommend to lessen all the screws and then carefully raise the separator from each side a bit ..it should come off than. Number is 55215302
@Seprent Crown
Did the separator come off easily? Mine seems to be stuck as if bolts are still on and it won't move
Be sure to loosen all screws and then lift from each side a little bit. Mine did stuck a little , too
@Serpent Crown
Thank you for your response I'll attempt it again
@Serpent Crown
I attempted again whilst the engine was hot and it just popped off and than you for your valuable video especially the torque sequence
@@alainbauristhene6427 no problem ! Ask anytime