SaltDogg SHPE2000 long term review.

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 28

  • @JohnDiMartino
    @JohnDiMartino 3 роки тому +1

    I absolutely love my SHPE1500 ,bought it new in 2006 never had a single issue with it used it full time til this year. I love that everything on it is either stainless steel or plastic,I believe the only part mild steel is the auger itself and mine is like new yet I fluid film it every season before storage. I had it in a 3/4 ton short bed so a 2 yard until wasn’t really good option for me .I also load out of my own pile so the half yard wasn’t an issue,I can understand how it could be buying it by the yard…

    • @DS-TRUCKS
      @DS-TRUCKS  3 роки тому

      On mine it's stainless

  • @firstclasslawnsnow3395
    @firstclasslawnsnow3395 2 роки тому

    I been running stainless motors driven spreaders for over 10 yrs. Finally tired of it…. If it’s not the carb, it’s the clutch, chain pops, bearing goes, or just flat out won’t start on that cold night. Then your pull cord snaps. Thinking of switching over

  • @precisionfilms3777
    @precisionfilms3777 3 роки тому +1

    Yo what's up DS. I have the same spreader. Never used it yet. This video has me pumped to use it

    • @DS-TRUCKS
      @DS-TRUCKS  3 роки тому

      Cool. Let me know how it goes.

  • @vincentmazziotti7035
    @vincentmazziotti7035 Місяць тому

    Crazy. Buyers uses all stainless internals. Way better built than that other stuff on the market. Never had issues with their plows or spreaders.

  • @robsolo4024
    @robsolo4024 Рік тому

    On mine I have to keep the vibrator on all the time otherwise it will not come out but it seems to come out more on the driver side and it doesn’t come out too much on the passenger side very uneven doesn’t really spread the greatest. Does the job

    • @DS-TRUCKS
      @DS-TRUCKS  Рік тому

      Try adjusting the diverter inside the shoot all the way over.

    • @domenicmanfredi8202
      @domenicmanfredi8202 День тому

      Same. Was the salt dry or wet?

  • @pj5607
    @pj5607 2 роки тому

    Where did you get your rubber mat from? Nice set up man!!! Looking at one of these spreaders

  • @jeremypeace8623
    @jeremypeace8623 2 роки тому +1

    The SaltDogg PRO series puts the SHPE to shame. If you’re interested in upgrading, we’ve got them in stock, including the conveyor chain fed model.
    The PRO series has a full length 5.25” diameter auger. The differences between SHPE & PRO are a lot more than folks think.

    • @DS-TRUCKS
      @DS-TRUCKS  2 роки тому

      Pro moves a lot more material?

    • @jeremypeace8623
      @jeremypeace8623 2 роки тому +2

      @@DS-TRUCKS yes sir! It’s night and day difference. Auger and spinner motor are much larger, there’s 2 bearings on the auger with grease fittings at the rear (the chain has 3 grease fittings), the chute swings like a door instead of hooking on a hanger, the wiring harness is 6guage wire instead of 8ga, and the controller is made in America. Not the junk China controller.
      We have guys switching from gas stainless steel because they hated the SHPE, but the PRO has filled that gap. Feel free to reach out if you’d like. I’m not a salesman, my dad owns the business, and I know these spreaders like the back of my hand.

    • @zackm3021
      @zackm3021 2 роки тому

      @@jeremypeace8623 Thanks man for the insight!

  • @larrybrandonii269
    @larrybrandonii269 2 роки тому

    Dually handle Better than single wheel on ice?

    • @DS-TRUCKS
      @DS-TRUCKS  2 роки тому

      Yes. If they have a limited slip like this one

  • @justinparks3312
    @justinparks3312 2 роки тому

    That truck is a beast was looking at the 550 but like the 450 as well

    • @DS-TRUCKS
      @DS-TRUCKS  2 роки тому

      The f-450 is cool because it serves the purpose of pickup truck as well as hardcore work truck. F550 is a better work truck but not a very good pickup truck. I wouldn't want to put my family in an f-550. 🤔 But then again 🤔 maybe I would!

  • @nathanbawolek2990
    @nathanbawolek2990 Рік тому

    Lol the pallet that it comes on it heavier that the actual spreader

  • @keithseiwert2256
    @keithseiwert2256 Рік тому

    Sucks but can be done one man. And a mission. 😅

  • @jasondow3970
    @jasondow3970 2 роки тому

    The western tornado is 1.8 yards

  • @samwalsh7763
    @samwalsh7763 2 роки тому

    Snow ex is not a better spreader just because of their notorious controller issues as well as the amount of error codes the system can recognize. Your warranty is a 2 year warranty and is voided with this video because you specifically stated you don’t clean it like you should and you won’t. Hope it’s been holding up this season for ya with no issues.
    Why not take care of it? It takes you an extra 20 minutes every storm.
    Don’t ever leave salt in any spreader after a storm. Use it all, even if you waste some of the salt. That’s the worst thing you can do for a 5k piece of equipment.

    • @DS-TRUCKS
      @DS-TRUCKS  2 роки тому

      Poor salter always has salt in it... I will use the bearing though 😭

    • @nathanbawolek2990
      @nathanbawolek2990 Рік тому

      Its all stainless and plastic. No need to worry about getting all the salt out. Just make sure bearing is greased and plugs get dielectirc grease. That 5k investment should pay for itself in 12 hopper fulls. Worst case senario you gotta replace the bearings or auger motor every few years.