A Simple And Easy Way to Make A Farm Gate Using A Panel.
Вставка
- Опубліковано 18 жов 2024
- A Simple And Easy Way to Make A Farm Gate Using A Panel.
I illustrate how to make a gate out of a cattle panel. The simple process should be just about an hour (including digging a hole, setting the post, determining the gate length, and installing the gate itself). This is perfect for those DYI'ers on a farm, homestead, ranch or even in the suburbs. Using cattle panels for a gate is fairly inexpensive, easy, and durable. Importantly, it can be customized for the countless situations a gate may be needed.
GOAT MILK SOAP & MORE:
Shop Our Store: GoofyGoatSoapw...
Facebook: / goofygoatsoapworks
Instagram: / goofygoatsoapworks
Pinterest: / goofygoatsoapworks
CONNECT! IT WOULD BE SO GREAT TO GET TO KNOW YOU.
Blog: www.SimplyMade...
Facebook: / simplymade Homestead
Instagram: / simplymadehomestead
Pinterest: / simplymadehomestead
Join us as we build a homestead from scratch and strive to live a simpler, more natural, healthier way of life: homemade homestead, tips and tricks in the garden, recipes from scratch.
We love to show how the homestead is growing and what works and what doesn't to help you in your journey to a more self-sustainable lifestyle. Sure hope you'll join us and hit that SUBSCRIBE button because we would love to have you along.
DISCLAIMER: “As an Amazon Associate I earn from qualifying purchases.” Some of the links above are affiliate links which means that I receive a small commission on qualified purchases at no additional costs to you. I only recommend products that I would use myself. Thank you for supporting our channel so we can continue to provide you with free content each week! We appreciate you more than you know.
Happy Homesteading,
Marian & Andrew
Great idea! I think I’m going to use this. God bless
Wonderful! Thank you so much for joining me.
Thanks! I had to build a quick pen for my dog that just had puppies and had some panels left over from my garden trellis, but didn't want to waste a bunch of wood building a gate.
Glad it helped!
Thank you
You're welcome
A super easy lazy way I did it ,was to use D clips or caribiner clips to attach panel gates right to my existing fence.😆
I did that for a few years. Just now creating pens with post corners and framed out gates.
It takes a while getting started. You do what you can. My sheep don't care what my gate looks like.😆
This is true! As long as it works is what counts.
Exactly what I was looking for. To build a fence with the same cattle panels, how far apart do the t-posts need to be? I'm using a total of 2 panels, gate included. Also, how to attach this gate to t-post rather than wood? Thanks so much for the easy instructions!
Glad to be of assistance! How to attach: I had some heavy 9 gauge wire that I made a loose fitting loop with. You could remove the barbs from barbed-wire fence and use that too. You could even use rope, but that would be just a temporary hinge.
Now to keep the gate closed I put a 1” pvc pipe into the ground where you want it to be closed and attached a straight metal rod to the gate. This will secure the bottom off the gate. And finally I use another piece of wire on top of the gate to fasten it to the fence.
As for the spacing, I am not exactly sure what you mean so forgive me if my answer is off a little. While putting up the panels as a fence, I will use 3 T-posts for every panel section, but overlapping each panel by 8-10”. This way two panels will share a Tpost. So if you are only using 2 panels together, that’ll be 5 Tposts. But it will depend on what you’re using it for. I also have 350-400# hogs and place an electric wire on the inside to keep them off it.
I hope this helps, I will try to send a pic of the gate for clarity when I feed the animals this morning.
I am unable to send pics or video through this chat. I did take a couple videos of various examples I did here for better clarification though. If you want them, text me at 423-888-7724 and I will send them to you. I am going to delete this thread tomorrow because of my cell number!
I hope you are still monitoring your UA-cam. I noticed you have a garden post that is at an angle with your upright post. You have them wired together at the top. How did you secure the bottom of the angled post?
I drive the T-post into the ground about 6-10” at approximately the same angle. It took several attempts to get figure out the right distance/angle, but it works out well!
But if you didn’t do that, you could use some pressure treated wood as a stake at the end.
Yes, I just used wire to secure the top and at the sides to the fence. They do make a contraption specifically for Tposts to joint the tops. I think they are about $20 at TSC.
Hope this answers your question.
You are to far from your speaker. It's so hard to hear you.
I’m sorry about that. Thank you for watching though. I don’t know which video you watched but in the beginning I didn’t have a microphone but now that I do, I try to wear it whenever I make a video. Thanks for letting me know though.
@@SimplyMadeHomestead it was the video in Make A Farm Gate Using A Panel. But no worries I just wanted you to know. Thank You!