NERF RHINO-FIRE MOD [MINIMIZATION AND NEW HANDLE]
Вставка
- Опубліковано 23 гру 2024
- This Nerf Rhino-fire modification involved minimizing it (by cutting off the barrels), replacing the handle, replacing the pusher motor, and rewiring it to a 3S Lipo battery.
If you liked the video, make sure to comment, like, and subscribe.
email: mag212.nerf@gmail.com
my webstore: mag212nerf.wix....
Facebook: / mag212nerfmods
Looks very well done, as per usual.
Thanks!
WalcomS7 wassup
Ahoy...
mag212, you're work is amazing
WalcomS7 OMG the legendary Walcom makes an appearance.
You should heatshrink over those exposed connections, especially since it's a LiPo build. Great use of the battery tray for a new grip though.
Whoops I guess I missed a spot ;)
IAmBobololo could you duel wield 2 of these things
Bobo ?!?!?!?!?!??
hey bro :D
Can you do a rewiring video for this
Easily one of your best mods. I also like how finally, your performance matches your looks.
make another and dual wield them :D
myan ormisbutt that would be even more terrifying
I have to work
myan ormisbutt I wouldn't mind dual weilding hammershots but not one of those.
good luck reloading four drums at once with two blaster in hand lol
@@gamerguy425 two drums in the front, two on the sides, facing up. toss the drums from the rhinofires, and just place the magwells down on the mags
nice job, 2 people I know who've taken up the challenge of Rewiring a rhino fire with LiPo's.
After watching this vid, I feel like this is what the Double Dealer should have been.
Bacon Cheesesteak 9999999999999999999999999999999999999999999999999(continued)x YES
Bacon Cheesesteak 9*10^34 YES
agreed
Yes you are right
mayancal3ndar yes
Best use of a rhino fire. Wanna be a Heavy for wars? use this.
Lew Jia Shen inpossible because youd need a third arm
That is awesome its a machine gun shot gun pistol primary, I hope the zombies at your HVZ or people at the wars dont rage quit to hard
WolfieVids NerfMods & More *too
What's the point in disliking seriously what's the problem he took an awesome gun and made it awesomer who can dislike that
the rhino fire itself sucks
Best mod I have seen for a long time!
Flawless intergration mag! You could even use the loop at the back of the gun to act as a sling mount if you use this for hvz or wars
Dude, fantastic work as usual. This looks fantastic, the handle is perfectly done!! Nice job mate.
looks a lot more like a colossal blitz modded like that. Good job! 10 darts per second is pretty good :)
You are a PRODIGY!!!!! Man, you might as well be the next Coop772!! It's very obvious you have a talent with modding. Also, how do you not have at LEAST 1 million subscribers?
New HvZ primary/specialised weapon?
dude love your vids hope I could do integrations like yours cause they are so clean
I've been waiting for so long for somebody to do this and this looks awesome.
Coop772 would be proud, if he were watching this. You both rock!
you are one talented person the work you do on these blasters is one of the best iv seen I've been watching your videos for quite some time now and i look forward to every video you put out cause the work you do is insane, keep it up!
This is actually pretty amazing!
I guess it's too difficult for me to tell from the video but, does it still fire alternately or do both barrels fore at the same time?
mag212 u r honestly my favorite nerf modder, I admire ur creativity and hard work
Amazing!
You made the rhino fire actually good!
I'm not gonna lie, skipped around the video a bit, I almost missed that flush grip integration you did. If the coloration was the same black and I hadn't notice the Nerf Rival grip, it would almost have seemed natural. Nicely done.
Rapidstrike pistols, meet your new master
Toxic Atom lol
This is one of the coolest mods I have ever seen! Great work!
I have a little question about your nerf store on your Website. Is shipping included with the Prices of the nerf guns?
How difficult would it be to rotate one of the pushers 180 degrees so that both barrels fire at the same time?
Is that grip inspired by the Rival Apollo?
Good to see you going with those new motors. Cool build, would still rather use a Rapidpistol but this is the closest to a practical Rhino-fire I've ever seen and probably will in a while.
Great job! Nice mod. As for the minimization, did you remove the front extended barrels or did you chop part of it off?
Awesome idea mag
amazing job! i just got this for my son for Christmas but the trigger isnt working. any advice?
Immediately fell in love the moment it started firing
That's the intro music to Mathologer.
Omfg.
Does removing the barrels increase rate of fire since the motor that moves the barrels back and fourth no longer wastes power?
What motors do you use for your flywheels?
Were the stock motors on this 130s or 180s? Could it fit a larger motor than a 180? Didn't catch what battery but doesn't the FPS seem a bit low?
Awesome! :)
What is that grip from?
What motors did you replace the stock ones with?
I'm not really sure how this blaster works, but assuming it uses 2 sets of flywheels, I was thinking that you could replace one set of flywheels with old barricade flywheels (pre-elite) so that the blaster could also fire suction darts
Awesome, first of its kind! Well done!!!
You always have new and cool ideas for unusual mods, very nice. Thumbs up!
Where do you get the brush paint for your mods
Did the motors burn out?
Is it just me or is the rear of this s blaster just begging to have a fold-over stock connected to that circular piece?
I would just go with a spas 12 stock but okay, the circular bit is for the pusher mech which is neat though.
Very strange but cool! I never even thought of this! well done.
what handle did you use? i want to attempt this...
Wait did you just destroy a costo cosgo whatever rhino fire?
You deserve way more subscribers
really excellent i need one!
Did you replace the flywheel motors?
Unfortunately, the rhino-fire flywheel motors have double axles so ordinary motors would be incapable of powering the four flywheels.
Oh. We need to find a functional replacement motor for a rhino fire then.
Riley Clark gotta admit, they seem to get the job done.
I'm just concerned about how quickly they may burn out.
So... why did the video say "MTB RHINO MOTOR REPLACEMENT" at 0:47?
actually makes the blaster look usable. Nice
Duder, another amazing build. This thing is awesomeness. :-)
Dude! I know you can make something that NOBODY have ever saw!!! You will be different, and on the good way!!! Do something new, something awesome, something interesting, something that only *YOU* can imagine!!!
Where did you get a blue rhino fire?
Why not put the grip on the top, so you hold it like a minigun?
AWESOME. A recommendation would be to add a stock attatchment point it would be easier to handle and would be like the best HvZ blaster
I love minimizations, there's just something about small guns that I love
What brush paint did you use ?
CHROME SKULL Citadel is the brand
Do you do commissions because that is beautiful
Awesome build! Has anyone used Worker or Hooligan wheels in their Rhino fire?
do you do commissions?
Dude your amazing at this
where do you get the paint
Best mod yet mags!!! :D
What a unique mod, good job!
Can the tripod still be attached?
@2:12 you can see the tripod mount looks intact, but a custom fore grip would probably be a better idea
Great googley moogley that's insane
do you still have the halo battle rifle replica
Bro you are like one of the best top 3 modders. Along with Bo-Bo and coop772
*can you fire with only one mag inserted?*
mag when it comes out are you gonna play borderlands 3?
They made a blue one?
how much do you charge for one
are you not going to sell this blaster?
Would you ever consider doing a project like this again? I don't have the funds currently, but that is just so incredibly badass and id like to purchase one in the future!
this is awesome. although i think it would be really cool with a pyragon foregrip on it right under the front barrels.
That looks like a nerf gun I can buy at the store good job!
Appolo handle?
I modded a Rapidstrike to make it a flywheel pump action blaster, it has a fire rate of 9 darts per second and a velocity of 100 FPS
Dude how do you not have more subs
hey dude keep up the great work your mods are awsome i ve doon the rapidstrike uzi and the cycloneshok to good mods
Why has no one done this before? It's awesome!
Very cool mod!
Nick Storz I know right
Is it flywheel?
Minh Giang no air powered
No wonder it's horrible
It's flywheel
Minh Giang are powered blaster are probably the best type of blasters
ProtoBoo Air powered and technically for the range factor that's true
Wow that is so cool nice job
Can you imagine the potential of that gun when the gatling gun comes out with the large drum
respect on the battlefield ;)
I don't like all the borderlands stuff you've been putting out, this was great
Frol where is the grip?
that looks awesome!
Really cool well done
how could you paint over that beautiful blue shell!that stuff is rare
how would I ido this if I were to keep the original Motors?
Aw, used the special blue variant
Can somebody help me on taking out the parts of a modulus ES-13 or something like that, I don't know how to take the parts out.
where can I purchase 2 of these? mag212
how did you get that handle?
Micah Calis appallo
This is strait up amazing
He makes disassembly look so easy lol