Це відео не доступне.
Перепрошуємо.
DIY ONE WAY SLIDE BUCKLE
Вставка
- Опубліковано 16 сер 2024
- Subscribe: bit.ly/thefish...
One Way Slide Buckles, or Australian one way slides are not cheap - however, they are not really that complicated to make with simple tools - here's my way of doing them - it doesn't cost much and the only thing you spend for might just be the wire if you don't already have them - The tools I use are pretty standard and can be found in most households, if not, they are cheap to buy.
So if you want to make some for your fishing - this is one very good way of stocking up on them and saving money and not have to buy from the shop - the thing with this also is the fact that these can be modified to suit your style of fishing - should you want to modify it to suit your preference, the main part of how to put one together is shown in this video - it's already up to you to customize it according to your preference. Have fun and I hope this helps you out! 1374657803$!$%%@)*$#)!1thneonglnsiwbttatest
Good video dude. I’ve been watching a few of these diy slider videos and I think yours is the best by far. Cheers
Wow, thanks!
@@TheFishingKit can you sell me some
@@wazup3333 I just make for myself...
Well done: Yup the replies from the various cool comments are very-very correct : I also say that you fishing slide is the Best I have seen:
Very well done:
I like that you have used a Cheap Hardware bought "Stainless Steel Washer'
Well done : No need to buy expensive fishing store S/steel rings
Very well done on choosing to use your 1 + 1 = 2 Logical Thoughts Feelings and Emotions:
Like tge Calmness within yourself
Well done : For choosing to connect and embrace your Inner Centered Being: To then be able to listen to and understand your Intuition/Guidence & Help & Knowledge & Wisdom:
It is the way it is Supposed to Be : Inorder for Chemical Human Beings to be of Being in, of and for their Gifts and Gift of Life's many-many Purposes
XXXXX X XXXXX in, of and for the 11:11 's
Absolutly nice technique jozzz
Thanks :)
i will try and do that , just need to get wire and a couple of tools then ill try.
Awesome dude :) There's one more after this...you will be needing a M10 sized stainless steel washer. So if you go to the hardware store, pick some of those up too.
You could do the idea at 05:18 where you wrap the wire at 08:45? Would not that look more clean?
You can if you want to. did a few like that.
Thanks you bang
You're Welcome.
where did you get the wire and what size?
Great video thanks for the content!
Hi Josh, This is TIG 304 stainless welding wire. Honestly, don't know the size, but when I bought it, there was a thicker one and then a thinner one and this is the thin one.
Yo… I bought property marker flags from tractor supply. 100 for 15 dollars, and they work perfectly! The right strength, smooth and slide perfect, beads, and egg sinkers slide on perfect as well. I’m sure you can find the flags at Home Depot also…. Mine turned out better than expected… hope this helps… tight lines!
@@COBALTGRUVthey don't rust in saltwater?
@@COBALTGRUVthe home Depot ones will rust
Awesome
glad to be of help.
Great vid. Been wanting to slide bait but the pre mades are costly for just 1
that's pretty much why I make my own...
@@TheFishingKitwhat kind of wire do you use?
@@wazup3333 I use 2 types, there's fishing wire from the philippines called "edward's" and if I cant get that, I use TIG wire.
Have you tried crimping the eyelet for the swivel and put shrink tubing over it?
that works as well :) I Think I did that in the video or mentioned it in this video or the video for the stopper.
You using 304 stainless steel tig welding rods?
Yup!
So how do you attach the line when sliding?
you wrap your line around the spring looking section.
What thickness TIG wire is that? 1/16?
honestly, I bought two sizes, and I used the thicker one...not sure if it's 1/16.
우오!! 이 친구 재주 정맣 좋네 ㅎㅎㅎ
감사 해요!!!
Why not jus crimp the swivel as well?
You can as well, but crips don't last as long :)
Parts list 🙏
I mentioned in the video actually.
I liked you verbal instructions, but the visual instruction needs attention. How about doing a follow up on this. I'll still give it a thumbs UP.
I agree with you, my camera work needs work - I am still learning :) I'll try to make a follow up video once I figure out a way. Really appreciate the feedback.
Hi Kit ... what wire are you using and where do we get it from??
I actually mention it at the start of the video. :D
Follow up on the question, where can I get that wire? Home Depot, Lowe’s and Ace hardware don’t have them for some reason.
@@SacredHeart808 you either look for TIG welding wire or get the thickest you can from Malin or American Fishing Wire. :)
#26-28 hardened steel wire
What size of the wire?
I think I used 400lb or 600lb on this one.
@@TheFishingKit thanks a lot sir👍
Still replied after years.
You are legend!
@@hendralesmana4683 :)
@@hendralesmana4683 :) I appreciate that!
This was invented in South Africa in the 90’s.
Yup...the bait tech in South Africa is the most advanced in the world I think.
You haven’t seen what we currently do 😉
@@kesnaidoo1078 wouldn't bet on that. :) But I am curious on what is going on since they banned drones?
We swim baits out to sea:)
@@kesnaidoo1078 🤣🤣🤣🤣
It's not Australian, it originated in South Africa.
it didnt. slide baiting was invented in hawaii, just that the one way slide is called "australian"
@@TheFishingKit The one way rig originated in SA. Specifically used to target non-ed species. The Ozzies caught on years later.
@@zamaleka1226 yes but for some reason it is called "australian" one way slides. but slide baiting in general started in hawaii
@@TheFishingKit I did not say that slide baiting did not originate from Hawaii. I was talking about the one way slide.
Good video but you need to work on your camera angles.
Thanks for the comment. Yes I agree, I am new to this...so kind of still learning. I really appreciate comments like this...so thanks so much!!!
@@TheFishingKit no problem! Your video did help with my buckle making 👌🏾 still gotta get the hang of it
Please redo the video, so you are not out of the frame doing the rig..
On the to do list.
I'M STILL TRYING TO WRAP MY HEAD AROUND THIS CONTRAPTION AND WHY PEOLE USE IT. YES IT KEEPS THE FISH STEADY SO IT WON'T MOVE BUT YOU LOSE THE SPUTNIK, WHICH STAYS IN THE OCEAN IN ORDER TO CATCH THE FISH. WHY NOT JUST PLACE A GOOD SIZE SINKER, A LEADER AND THEN HOOK IT TO A LIVE FISH. SIMPLE AS THAT
You have the wrong impression of what this is.
This is a non return slide buckle. Slide buckles enables you to cast your sinker first (which goes further because it does not have the drag of the bait). After the cast and positioning of the sinker, you can then slide the bait down using this device.
In Hawaii, where these were first used, they fished off cliffs that have a steep angle so they can slide the bait down using a simple weighted slide buckle...but that type slides back and forth...while this one in the video slides in only one direction - forward.
One way slides such as this on the video can be used from the surf.
@@TheFishingKit I BOUGHT TWO 7 OZ ON AMAZON FOR 8 BUKS. THEY WERE HAVING A DEAL. IM GOING TO USE IT FOR SURF FISHING BUT I WONT SLIDE BAIT. ILL ATTACH THIS SINKER TO BRAIDED LINE. ILL ABOUT 8 FEET UP THE LINE. ILL TIE MONOFILIMANT OF 50LBS ABOUT 2 FOOT LONG WITH LIVE BAIT AT THE HOOK AND THATS BETTER THAN SLIDING BAIT CONTRAPTION
@@leelunk8235 Lee, it is always easy to say one thing is better than another if you don't know how things work. A few centuries ago, people thought the boat was the ultimate vehicle for long distance travel - These days, we don't even have that kind of thinking even as an afterthought.
If you think you can outcast a naked sinker with your setup, physics begs to differ. It's ok if you don't use this...only means you aren't the target market for this sort of thing :)
@@TheFishingKit ITS A WEIGHT SINKER WITH LEGS. YOU ACT LIKE YOU DISCOVERED THE END ALL BE ALL. PEOPLE HAVE USED THEM IN ALL SORTS OF WAYS. EVEN AS A WEAPON HAHA
What are you on about? All I am saying is you can cast a sinker without bait farther than you can than with bait. then you use the slide to send your bait to your sinker. If you want to see for yourself, cast a base sinker without bait and then with bait and see which one goes farther - don't take my word for it. Like I said, if you don't see the value of this device, YOU are not part of the people the video was made for...so what's wrong? You want to argue for what?