hi i acquired my 970m to installing it in my m15x, when i put it on the motherboard and try to boot it sounds 3 times (1 long beep and 2 short ones) I updated my bios to a modified one do you have any tip? my gpu wont give video :(
Dear Diego , i think card is faulty . First fix the original card back and see if it boots . It should start normally on boot or could be RAM as well .RAM also makes a Beep . What was the card installed on M15x and processor now ? Make sure you have 150w adapter . When u fix MXM board make sure it goes in the slot properly . Card upgrade guide is available at Eurocom website or u can search eurocom channel on youtube . Apply thermal paste and thermal slips at right places . Apply heat sink , wait around 2 3 mins to settle . Then put screws in place and try to boot again .
@@gameram551 I put all together (the original GPU) and it booted normally. Processor is i7 720QM When i assembled the new GPU I did all that stuff and got that beeps, I think it's faulty, thanks for the quick response
Dear , Yes, it does work on my PC and its smooth at 30 FPS LOCKED and it can go upto 40 to 45 fps when i am not recording as well . I had just set settings same in the Video and it works on 970M 6GB.
@@raulmontes3441 Dear , No Overclocks or underclocks - i Use Corsair Vengeance 8 GB DDR3 at 1600 mhz and 2 GB that came with my PC. I had just removed only 2 GB ram and fixed 8GB RAM only . the Standard package was 4GB RAM.
hi i acquired my 970m to installing it in my m15x, when i put it on the motherboard and try to boot it sounds 3 times (1 long beep and 2 short ones)
I updated my bios to a modified one
do you have any tip?
my gpu wont give video :(
Dear Diego , i think card is faulty . First fix the original card back and see if it boots . It should start normally on boot or could be RAM as well .RAM also makes a Beep . What was the card installed on M15x and processor now ? Make sure you have 150w adapter . When u fix MXM board make sure it goes in the slot properly . Card upgrade guide is available at Eurocom website or u can search eurocom channel on youtube . Apply thermal paste and thermal slips at right places . Apply heat sink , wait around 2 3 mins to settle . Then put screws in place and try to boot again .
@@gameram551 I put all together (the original GPU) and it booted normally.
Processor is i7 720QM
When i assembled the new GPU I did all that stuff and got that beeps, I think it's faulty, thanks for the quick response
@@Diego-bf8es Yes i think so as well , replace exchange faulty Card with New 970M .
10 GB of RAM? How did you do that? I thought that 8GB was max ram for this computer
Dear , Yes, it does work on my PC and its smooth at 30 FPS LOCKED and it can go upto 40 to 45 fps when i am not recording as well . I had just set settings same in the Video and it works on 970M 6GB.
@@gameram551 which brand are you using? Did you underclock the ram? I've heard that 16gb is max ram, but downclocked to 800mhz or 1333mhz
@@raulmontes3441 Dear , No Overclocks or underclocks - i Use Corsair Vengeance 8 GB DDR3 at 1600 mhz and 2 GB that came with my PC. I had just removed only 2 GB ram and fixed 8GB RAM only . the Standard package was 4GB RAM.
@@gameram551 you were right I installed 16gb of ram and a 970m! My computer has a new life