Very helpful video thanks for posting. Remember, a simple bubble level is not good enough to check the accuracy. There is a simple method using a wall and tape for the horizontal levelness. And there is another method using two walls and tape to check the levelness up and down coming out of the laser level.
Hey I am from the laser factory, for most of times it is not recommended to make cal through balance metal as after sometime the metal will get loose again, but we always make cal through some screws which are attaching or tighten to the diode.
Hi sir i ask you for help i have a problem with a new laser level witch have the horizental line with a reduced line we can say it's off What could be the problem
Bună... spune-mi te rog frumos, cablurile de alimentare influențează dacă ating între ele? Îți vorbesc despre un laser 3D cu 12 linii care îmi dă probleme. Mulțumesc frumos
@@eddymetaldiy4035 ¡hola amigo, lo que pasa es que tengo un láser DeWalt 88 y del trajín diario lo comprobé y está 6mm a los 7 metros desnivelado hacia la derecha, si lo enrosco o desenrosco lo podría volver a calibrar?
Hi, buy this laser to help me level out my clothing desires. But I see that it only works to be stabilized frontally on walls. But is there any possibility of putting it from the ceiling and reflecting it on a table and remaining static?
Would that be the $99 model, the $199 model or the $299 model? Also...what is a Chinese store? Do you mean the American retailer that sells goods made by Chinese companies? Even some genuine Ford OEM dealers fit that description. Thanks for your helpful comment.
Very helpful video thanks for posting. Remember, a simple bubble level is not good enough to check the accuracy. There is a simple method using a wall and tape for the horizontal levelness. And there is another method using two walls and tape to check the levelness up and down coming out of the laser level.
Hey I am from the laser factory, for most of times it is not recommended to make cal through balance metal as after sometime the metal will get loose again, but we always make cal through some screws which are attaching or tighten to the diode.
Thanks for your help
Hi sir i ask you for help i have a problem with a new laser level witch have the horizental line with a reduced line we can say it's off
What could be the problem
Ahhhh finally a good vidéo on that
thank you for. knowledge. l will adjust my laser level
Bună... spune-mi te rog frumos, cablurile de alimentare influențează dacă ating între ele?
Îți vorbesc despre un laser 3D cu 12 linii care îmi dă probleme.
Mulțumesc frumos
Todos los niveles funcionan con el mismo sistema de tornillos??
Os agradecería eternamente una respuesta.
Si
@@eddymetaldiy4035 ¡hola amigo, lo que pasa es que tengo un láser DeWalt 88 y del trajín diario lo comprobé y está 6mm a los 7 metros desnivelado hacia la derecha, si lo enrosco o desenrosco lo podría volver a calibrar?
thank you !
Hi, buy this laser to help me level out my clothing desires. But I see that it only works to be stabilized frontally on walls. But is there any possibility of putting it from the ceiling and reflecting it on a table and remaining static?
Same problem on einhell laser level not leveling...
How to calibrate:
1. Return this to the Chinese store
2. Buy a real laser level
Would that be the $99 model, the $199 model or the $299 model? Also...what is a Chinese store? Do you mean the American retailer that sells goods made by Chinese companies? Even some genuine Ford OEM dealers fit that description. Thanks for your helpful comment.
Like...
You should never have to calibrate a laser level bad design
My level doesn't look like this at all
There are hundreds of different models. You did not mention what model you have yet it would likely not help.