[Desk lathe] Making special size bearing nuts [M27 P1.5]
Вставка
- Опубліковано 3 лип 2024
- Distorted bearing nuts used in lathes
Previously, I used something that I had removed and corrected.
If it was sold as a mass-produced item, it would cost around 200 yen to change it.
The 1.5mm pitch of M27 is a special size and is not in the standard.
So, I decided to remake it using a thread cutting tool.
0:00 Nuts modified in the past
0:20 What is a bearing nut?
1:33 What is AN05 nut?
2:21 3D printer M27 plug gauge
3:30 Modify from M25 to M27
4:26 Machining M27 screws with a thread cutting tool
5:45 Finish the nut
6:57 Try installing the nut
9:00 Paint with black dye
12:37 Bearing nut completed - Навчання та стиль
作る楽しみが有りますね。
面倒な性格の自分は、六角ナット買ってスライスしましたわw
コメントありがとうございます
無いものは作るにかぎります(^_^;)
貴方の動画興味を引き見させて頂き研究熱心で関心致しました、特にめねじ切り、切削油は何を使って居ますか?極圧添加剤入りが良いのですが無ければ天ぷら油(使い古しで可)抜群のねじに成ります、但し植物油は酸化しゴム状に固まるので石油でベットを拭いて下さいね。
コメントありがとうございます
切削油はAZの水溶性切削油を使っています
天ぷら油はやったこと無いですね、今度試してみます
水溶性切削油剤は冷却効果は大ですがスベリ面効果が小さい為ネジきり作業にはあまり効果有りません。一級機械技能士@@engi-nin