I Gigged The Seymour Duncan PowerStage 200 with my HX Stomp...

Поділитися
Вставка
  • Опубліковано 29 вер 2024
  • The Seymour Duncan PowerStage 200 has been an absolute game changer when it comes to my live tone. And its hard to believe its not a pickup!
    Upgrade your tone here: amzn.to/3uuJGzD
    Let me know what you think, and until next time, let the music play!
    Watch These Videos Next
    Is the HX Stomp Worth It In 2024 -
    Should You Buy Kemper Profiler Player -
    -
    If you are interested in the gear I use, check it out here: ryansnydermusi...
    🎸 The Best Guitar Lessons with Truefire (affiliate) - prf.hn/l/7ooXNdJ
    All Amazon & Reverb links are affiliate links - which means if you buy a product based on my recommendation, I’ll receive a small commission. There is no cost to you, it just helps support the channel.

КОМЕНТАРІ • 17

  • @AdamMason
    @AdamMason 4 місяці тому +3

    I have this and didn't know about the EQ/Cab sim working on certain ports in the back (guess I should read the manual hahaha). Thanks for this!

  • @TheFreeman4955
    @TheFreeman4955 2 місяці тому +2

    Ok, I have tried almost everything mentioned. Except with much cheaper stuff. Pod go 4 cable into tube amp, PA , tried spark mini into speakers, on and on. Didn't like the tones. Then I saw a youtube where a guy plugged a Electro-Hamonics 44 magnum power amp into a 4x12 using a spark amp. I found a 44 Magnum used locally for $50 and a Stage Right 1x12 cab for $100 and gave it a try. Boom! It works! Pod Go and Spark sound amazing! Just turn off the cab sim in Pod Go and don’t use the combo. The spark mini I just went straight in from the headphone jack to the 44 Mag then to the cabinet. I could literally take a spark mini and the 44 mag power amp and hook up to any cabinet and have tons of amps and pedals. Sounds clear as a bell! As a side note, I also hooked my Katana Go into it and Boom! Got a Katana Go running through a cab full blast! Now I see why Boss stopped Katana Go production!

  • @LIKEFUNK
    @LIKEFUNK 3 місяці тому +1

    I found the similar concept, I run a mult-unit/modeller? into a pair of 15's (P.A.) 2 way to achieve the best amp and cab sound I've ever heard, I've been doing it for around 4 years now and it's unbeatable in any setting live....I also happen to be fortunate to own two of the rarest little helpers on my signal chain that quite frankly separate the wheat from the chaff during the process.
    I have two perfect Boss FA-1's in my stereo chain during such....contrary to the claim they are replaceable these days, they aren't!
    I usually use one or both of my 15's as my stage guitar amp behind me mic'd up if needed, most times its not required, my other 15's are carrying my front of house stuff with about 20% linked in when mic'd at times in larger venues.
    I often tilt back my stage set up and it's truly breathtaking, it's passed several blind tests for a bit of a laugh when friends roll up.
    It more than moves air and has the to die for feel,- it's downright trouser shaking!...I juice it with a Crown 600 power amp.
    My 15's are obviously full range and the right quality to slay the beast allowing my multi/modeller to breathe as intended to.

  • @carlosalmodovar3637
    @carlosalmodovar3637 7 місяців тому +2

    I have a similar setup with a headrush, a cab and the seymour duncan. How you manage the volumes? 50/50? Hi helix volume low Power stage volume or max power stage volume and low helix volume?

    • @ryansnydercg
      @ryansnydercg  7 місяців тому +2

      So I have the output on the HX at 50% I’ve found that when I have it fully cranked, it clips the input of the powerstage. I then crank the powerstage to whatever volume I need

  • @Sintrophia1
    @Sintrophia1 6 місяців тому +2

    Very good video!

  • @danieleonorati6671
    @danieleonorati6671 Місяць тому

    How set output level? Line or inst? Thanks

    • @ryansnydercg
      @ryansnydercg  Місяць тому +1

      Instrument level. You can use both but instrument level prevents it from clipping the input.

  • @vinnyguerriero5150
    @vinnyguerriero5150 4 місяці тому

    I’ve had a pair of the 200s and then moved to the stereo 100 but find that for a 16 ohm speaker cab (I have a pair of Friedman 1x12s) there isn’t enough headroom in a band context. I want to make this work but frustrated…..

    • @ryansnydercg
      @ryansnydercg  4 місяці тому

      Is it just with the 100s or did the 200s not move them enough either?

    • @vinnyguerriero5150
      @vinnyguerriero5150 4 місяці тому +1

      @@ryansnydercg 200 was better but my matrix gt1000 and the SD PowerStage 700 are much more satisfying. I’m also questioning the form factor for pedal board. I’m concluding (I think) I prefer the amp to be closer to the cab versus closer to me/at my foot. First world problems

    • @GallowayJesse
      @GallowayJesse 2 місяці тому

      this is what I've been afraid of

  • @LIKEFUNK
    @LIKEFUNK 3 місяці тому +2

    My guitar tone is so frigging yummy I should be paying the venue to let me loose at every gig instead in all honesty! 🔥

  • @rudemood69
    @rudemood69 3 місяці тому +3

    can you make a video on how to set it up or maybe sample how it sounds