What if you clean everything solenoid steam box drain tube and the tube going across the back, and it's still slowly to release pressure? I even took the steam box apart and cleaned the tube inside with the holes in it. It's a henny penny computron 600 . I work for a grocery store food market( we have 17 stores )and we have henny penny fryers mainly in our deli's ,I'm a tech also. This is on a fryer I was working on yesterday
Good question. Depending on the cook cycle and the amount of moisture in the product, you should have anywhere between 30 seconds and one minute to release pressure if the plumbing from the frypot through to the condensation box is fully open to its 1/2" diameter. If this is taking longer, then the tubing or solenoid valve partially obstructed and not open to its full 1/2" diameter.
Hello Amari, we are unable to provide technical support through our channel. We encourage you to contact your local Henny Penny distributor for support. You can find your distributor contact information here: www.hennypenny.com/sales-service/distributor-service-locator/ You can also contact our Technical Support department at tservices@hennypenny.com
What if you clean everything solenoid steam box drain tube and the tube going across the back, and it's still slowly to release pressure? I even took the steam box apart and cleaned the tube inside with the holes in it. It's a henny penny computron 600 . I work for a grocery store food market( we have 17 stores )and we have henny penny fryers mainly in our deli's ,I'm a tech also. This is on a fryer I was working on yesterday
Good question. Depending on the cook cycle and the amount of moisture in the product, you should have anywhere between 30 seconds and one minute to release pressure if the plumbing from the frypot through to the condensation box is fully open to its 1/2" diameter. If this is taking longer, then the tubing or solenoid valve partially obstructed and not open to its full 1/2" diameter.
@@HennyPennyService
Hi Sir,
My Henny Penny's main burner is not firing? Pilot is working but main burner is not getting fire? Any advice please?
Hello Amari, we are unable to provide technical support through our channel. We encourage you to contact your local Henny Penny distributor for support. You can find your distributor contact information here: www.hennypenny.com/sales-service/distributor-service-locator/
You can also contact our Technical Support department at tservices@hennypenny.com
You probably didn't turn the small gas control back to the burner position but you probably worked that out now lol.