Thanks for the video. After static regeneration, did engine management line on and engine systems fault came back ? I have exactly the same issue, engine management light on and showing engine systems fault. What should I do? Can you advise please?
Yes, they came back a couple of times. What i recetly did was, i removed the sensor on the dpf and inserted the dpf cleaning fluid into the dpf and then ran the car for regeneration. That helped with the engine light going away
1: Check the hoses to the preassure sensor and 2: the sensor. Drench the dpf with coca cola or alloy wheel cleaner. I have built my own filling tool. A preassure buttle and a long hose with a pipe from a spray bottle at the end. Fill through the temp srnso hole (13 mm).
Hey, thanks for the video. I have a focus 2013 mk2. A fault code came up when i was driving on the highway for about 30min, saying that the dpf temperature is too low for regeneration. Any ideas why the dpf is not getting to temperature?
well it can happen for some reasons. maybe temperature sensor is faulty or for some reason car is not dumping fuel in dpf to raise temperature. connect an OBD and read live data while driving
I wish everyone creating emission laws and working towards banning ice cars would work with a used car for the family to keep their lifves running, themsrlfves.
Hi! My ford ecosport 2021 diesel static regeneration failed at 85-90% most of the time. I have heard from someone that to make the regeneration successful, the soot % should be at 20%. My car soot % is at 59%. What should I do? There is no fault code on DTC except DPF soot accumulation which I cleared earlier and then start regeneration. Any advice or suggestions ?
It is absolutely safe. It is normal process of dfp regeneration. Only thing Is that this way you will burn only the carbon particles not the metalic ones. So if your dpf is already full of metalic particles, this wont help and you will have to remove dpf filter and either get a new one or get it cleaned profesionaly. Hope this helps
Thanks for the video. After static regeneration, did engine management line on and engine systems fault came back ? I have exactly the same issue, engine management light on and showing engine systems fault. What should I do? Can you advise please?
Yes, they came back a couple of times. What i recetly did was, i removed the sensor on the dpf and inserted the dpf cleaning fluid into the dpf and then ran the car for regeneration. That helped with the engine light going away
1: Check the hoses to the preassure sensor and 2: the sensor. Drench the dpf with coca cola or alloy wheel cleaner. I have built my own filling tool. A preassure buttle and a long hose with a pipe from a spray bottle at the end. Fill through the temp srnso hole (13 mm).
Hey, thanks for the video. I have a focus 2013 mk2. A fault code came up when i was driving on the highway for about 30min, saying that the dpf temperature is too low for regeneration. Any ideas why the dpf is not getting to temperature?
well it can happen for some reasons. maybe temperature sensor is faulty or for some reason car is not dumping fuel in dpf to raise temperature. connect an OBD and read live data while driving
Best to open the bonnet while doing static regen
Noted
What autal code reader are you using please???
Autel Maxi check Pro
@adnans garage Did it work long term?
Well honestly No. I will post a new video where i did solve this issue another way by spraying a dpf cleaner directly into the DPF
I wish everyone creating emission laws and working towards banning ice cars would work with a used car for the family to keep their lifves running, themsrlfves.
Hi!
My ford ecosport 2021 diesel static regeneration failed at 85-90% most of the time. I have heard from someone that to make the regeneration successful, the soot % should be at 20%. My car soot % is at 59%.
What should I do? There is no fault code on DTC except DPF soot accumulation which I cleared earlier and then start regeneration.
Any advice or suggestions ?
Dont force regeneration by clearing the code. it will be disaster. It will destroy the injector seals and can be any other part related to engine
@@adnansgarage any advice or suggestions plz, why it’s getting failed at after 30-40min.
DPF issue sucks my life 😳
The regeneration can be done by just driving hard folks.....
Yes but if the car goes in limp mode already, it wont allow you drive hard
Need to ask.... You're not a mechanic are you? Or even have skills in mechanics?
I am not a professional mechanic
not a safe procedure, might damage the filter or engine, but whatever works i guess
Thanks for the comment. Why do you think it can damage the engine
It is absolutely safe. It is normal process of dfp regeneration. Only thing Is that this way you will burn only the carbon particles not the metalic ones. So if your dpf is already full of metalic particles, this wont help and you will have to remove dpf filter and either get a new one or get it cleaned profesionaly. Hope this helps
Thanks for the info! What method of professional cleaning would you go for? @@boidheach9433