@@jodiecapila355 i watch him first but it felt boring, a couple days later cubehead uploadaed a video about him and now i watch every single KADtheCuber video
Me cuz, I was unable to decide between Meilong 3M and RS3M 2020 Also, I didn't subscribe him that time, but when he revealed his face and made some videos after that, I found that he looks somewhat similar to My cousin brother,.. ( whom I am gonna visit tomorrow or soon :)... )
How is it possible to get a stickered gan 11 m pro?! i thought the four versions of it were all in stickerless version. Wow u r the odd one out i guess.
I love the sincerity. I was shocked when you sincerely said that it was not ok... and when you said it was too expensive. Even though, I would like to have a cube that uses core magnets one day. Hope more people go after GAN in the neste 2-3 years.
Am I the only person who think that the angstrom setup is very sticky feeling in the cube. I feel like the cube has that clicky feeling more with these lubes.
I love your videos, you are my favorite youtuber, I see you from the first video and I will see you until the last. When I am frustrated or angry my therapy is to watch your videos. Keep going so you're going to get very high. (I HAVE SEEN THIS VIDEO ABOUT 137 TIMES)
Got the stickeless version of it yesterday and I'm amazed, especially that "locking" of the magnets, but am not up to date and just bought the most expensive one I could get (judge me) to see how far they came technology wise. For some context: It's my first new one since the late 2000s when there where no magnets and the only settings you had where the center screws and amount of silicone spray you applied. There weren't even stickerless cubes, just white and black with stickers. Never been really fast but instantly back to my glory days of sub 30 seconds averages :D
Which one would you recommend, the Gan 11 m pro stickered or the sticker-less. I really am itching to get this cube, but I am really unsure wheather to get the stickered one or the sticker-less one.
Few Questions and Tips - Are you gonna host a 3K or 5K giveaway? You can improve by avoiding just a few y or y2 rotations in your solves. Done. This is what I wanted to say... ________________________________ Also you look somewhat similar to my cousin brother, whom I am gonna visit soon :)
hey buddy a quick tip for you, you can be more lound that will just bring a new energy and can you give a short message to cubehead that i love him,and he should just uplaod videos beside his job thankyou a shoutout from your side will be very helpful for me
I have Gan 11m pro but I setup it a very fast cube ( I think ) and if u interesting it: -Dark blue and at 4 -Out ring spring things at 2 -Magnet setting at 3 -Wipe all lube have in cube ( I think that may make it cant turn very fast ) then lube with Moyu lube v1, v2 -2-3 drop moyu v1 lube ( super thicc one ) in core and 1-2 drop at face piece rub with moyu v1 lube I think Gan 11m pro is very good because it can be control cube or can be super duper fast cube but if u new I think get the ms3 or dayan tengyu v2 one, cause Gan cube kind of expensive but it still a very good cube in my opinion ( my English is not my main language so maybe some mistake )
For those who are unsure if the gan 11 m pro comes in stickered, check the link in the description👍
Why wasn't it released beforeeeeee
I was discover this channel from cubehead
@@jodiecapila355 i watch him first but it felt boring, a couple days later cubehead uploadaed a video about him and now i watch every single KADtheCuber video
Dayan guhong v4 m (angstrom,mystic,...) please
@@crift3vil731 they forgot to make a stickered ver so they made it now
Who found Kad from cube head, also I haven’t stopped watching ur vids ever since.
I found Kad before cube head because I wanted to see a RS3M WRM comparison lol 😂
@@yankeeromeoalpha 🤣
Not me cuz i have been his subscriber when he had 600 sub only
Me cuz, I was unable to decide between Meilong 3M and RS3M 2020
Also, I didn't subscribe him that time, but when he revealed his face and made some videos after that, I found that he looks somewhat similar to My cousin brother,.. ( whom I am gonna visit tomorrow or soon :)... )
Not me but the second part is true lol
The Gan 11m Pro Stickered looks like a Gan Air SM lol
I thought he faked it like that lol
A stickered gan cube never gets old!
lol Kad is hitting on the rs3m 2020
How is it possible to get a stickered gan 11 m pro?! i thought the four versions of it were all in stickerless version. Wow u r the odd one out i guess.
thecubicle has it
Its released by gan
Available now
Its possible
I love the sincerity. I was shocked when you sincerely said that it was not ok... and when you said it was too expensive. Even though, I would like to have a cube that uses core magnets one day. Hope more people go after GAN in the neste 2-3 years.
0:39 thats funny when u think how he filmed it
Press record
Go out
Come in lol😂 □
LoL
Hi will you do a giveaway to me since I don’t have any cubes
OMG I WANTED A !! M PRO IN BLACK
You make amazing videos. Thank You from the cubing community to you!!
Nice video dude, very informative, I really like how stickered gans look
Yeah the 11 doesn't go well with fleet. I learnt it the hard way too and just ended up doing the angstrom setup
Am I the only person who think that the angstrom setup is very sticky feeling in the cube. I feel like the cube has that clicky feeling more with these lubes.
JUST USE STARCODE CUBEHEAD
FINALLY SOMEONE WHO LIKES THE STICKERED VERSION
First
That editing tho..
Your my favourite Youcuber and the only one I really liked (much better than cube head , jperm etc.
Plot twist it’s a rs3m with a gan logo
what camera did ypu use
Damn
And i am still with rs3m 2020
Same, well uh I am gonna get an XS soon so ya...
@@Cube_In_Space rs3m to direct xs
WoW
@@cuberoom5625 The XS was on sale at The Cubicle
If he uploaded more he would alr be at 5k. He makes such good content!
I love kad's videos
Yeah I never heard of him before cubehead buy his voids are amazing
Me, sees the thumbnail: Ah, clickbait... it's definately an Rs3m painted black with gan stickers....
poggers! great editing as usual
Phil needs to give u a matt 😂😂😂
I thought you didn't like stickered cubes 😂
Yo another gan 11 m pro owner!
Collab in the future?
Oh yeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
no way i also got mine last saturday (:
Kad bro for the magnets you just gotta lower the magnet strenght
Matthew 1:21 "He will save His people from their sins"❤️❤️
Amen
Are you calling cubing a sing
first
Can’t wait for cubicle custom RS3M 2020 review! Lmao
Love the vids
Is it real gan11mpro
theirs a stickered version??
U should have bought the stickerless version
Dont forget you have to adjust the magnet settings to make the magnets weaker
good video
It is night here
you do not start the timer corectly
OOH Nice!
Quality content bud 👌
*It's unanimous*
Out of box
How about rs3m black
Get a cube mat
Let’s goooo
You can make the magnet weaker and remove the magnets conected to the core
😂🤣 666 liks
This is top tier content. The quality of your videos are amazing.
Wow
Wow
YES
I love your videos, you are my favorite youtuber, I see you from the first video and I will see you until the last.
When I am frustrated or angry my therapy is to watch your videos.
Keep going so you're going to get very high.
(I HAVE SEEN THIS VIDEO ABOUT 137 TIMES)
Got the stickeless version of it yesterday and I'm amazed, especially that "locking" of the magnets, but am not up to date and just bought the most expensive one I could get (judge me) to see how far they came technology wise. For some context: It's my first new one since the late 2000s when there where no magnets and the only settings you had where the center screws and amount of silicone spray you applied. There weren't even stickerless cubes, just white and black with stickers. Never been really fast but instantly back to my glory days of sub 30 seconds averages :D
Nice
69th comment nice
Are you filipino
Which one would you recommend, the Gan 11 m pro stickered or the sticker-less. I really am itching to get this cube, but I am really unsure wheather to get the stickered one or the sticker-less one.
I have the best idea ever, your vids are crazy awesome just like Cubehead's. So why don't you two have a cubing race?
bruh what happened to the unofficial world record vid
Idk
he said he just wanted to show that he is alive and after 1 week he might delete it. I guess he deleted
@@dharmansgirl1146 he said that on his live stream that is is cuz he does rewiwes and stuff not skits
@@kscubemaster390 ok
THANKS FOR GETTING.
WHY YA GET STICKERED
The one TRUE QUESTION y did u get stickered?
Nah this is not gan 11 m pro
@@bdcmusic ah the certainty of uncertainty
why the stickered verion
I dont know probably because he will have a use for the bag(and it cheaper)
Can you unboxing gan r and more because I love your unboxing video
Try the ms3 v1 at the start it is not nice but after lubing it is God level
Why does the yuxin Kylin v2 look like that lmao
CubeHead vs KADtheCuber potentially
Im early
is it only me that i feel KadtheCuber is way funnier that other popular cubers?
Anyone from india?
Yes
At the time of commenting your subscribers are exactly same as the WR
Can u make a video of rs3m 2020 vs yuxin kylin v2 m
what if its 45 dollars? yes im talking about the duo
Few Questions and Tips -
Are you gonna host a 3K or 5K giveaway?
You can improve by avoiding just a few y or y2 rotations in your solves.
Done. This is what I wanted to say...
________________________________
Also you look somewhat similar to my cousin brother, whom I am gonna visit soon :)
You get a flagship cube and you get stickeres
Great video quality. Keep going.
Hey Kad Great video. I think i am getting this cube for my Birthday soon
amazing vid but if u thought that felt good get the stickless and mod the magnets
How does it cost ????
I wanna buy it
$64.99
Thanks dude
hey buddy a quick tip for you, you can be more lound that will just bring a new energy and can you give a short message to cubehead that i love him,and he should just uplaod videos beside his job
thankyou a shoutout from your side will be very helpful for me
I thought he faked it but no it comes snickered now
Upload more about RS3M 2020
Stickered? Idk if I would like that....
Its impossibile that the gan 11 m pro is stickerd
Just remove the core magnet
อึ้งเกินไปครับ
Magnet power is adjustable
What camera/microphone do you use?
Aay stickered cube
Stickered Gancubes is so superr cool
I notice that you always solve green cross
Why in black tho?
The gan 11 m pro is suppose to be stickerlees
Kad is a simp for rs3m
Stupid Walmart cube vid
I have Gan 11m pro but I setup it a very fast cube ( I think ) and if u interesting it:
-Dark blue and at 4
-Out ring spring things at 2
-Magnet setting at 3
-Wipe all lube have in cube ( I think that may make it cant turn very fast ) then lube with Moyu lube v1, v2
-2-3 drop moyu v1 lube ( super thicc one ) in core and 1-2 drop at face piece rub with moyu v1 lube
I think Gan 11m pro is very good because it can be control cube or can be super duper fast cube but if u new I think get the ms3 or dayan tengyu v2 one, cause Gan cube kind of expensive but it still a very good cube in my opinion ( my English is not my main language so maybe some mistake )
I want Kad to challenge Jperm