My wife did hear a little rubbing occasionally. I've since made some adjustments to the front flaps. A little cutting, bending, and a few small screws took care of it. The adjustments didn't hurt the integrity of them either. 👍🏻
Hey, I notice that when I fully turn there is a rub where the bracket and mud flap over lay. Did you have similar issue and how did you go about dealing with that
Yes, we had a little running. Since the tire scratched the mudflap where it was running, it basically marked the area that needed to be adjusted. I was able to make a cut in part of the flap, and then bend that area to make enough clearance. It's sort of hard to explain.
Total newbie here. Do you need to add loctite? I read that red loctite isn’t removable except with heat so should I use blue or none at all? Also did you use washers with the bolts you bought? Thanks.
I did that on my sas and it still rubs.
My wife did hear a little rubbing occasionally. I've since made some adjustments to the front flaps. A little cutting, bending, and a few small screws took care of it. The adjustments didn't hurt the integrity of them either. 👍🏻
@@broncobebop cool, will try that as well, thanks for the prompt answer and encouragement!!
Hey, I notice that when I fully turn there is a rub where the bracket and mud flap over lay. Did you have similar issue and how did you go about dealing with that
Yes, we had a little running. Since the tire scratched the mudflap where it was running, it basically marked the area that needed to be adjusted. I was able to make a cut in part of the flap, and then bend that area to make enough clearance. It's sort of hard to explain.
I have Mabett flaps and they’re great. No rubbing or problem with clearance.
Great video.I should know i used to work as a mudflap.. I was flexible and willing to travel
Big Fan. Keep up the good work. Love your intro. Wish I thought of it.
Thanks!
Total newbie here. Do you need to add loctite? I read that red loctite isn’t removable except with heat so should I use blue or none at all? Also did you use washers with the bolts you bought? Thanks.
Great site
Great video, I bought the same ones on my non-sash BADLANDS and it was super easy except for removing the fasteners on the crashbars
How is it 8 months later? I'm thinking about doing the same. None-Sash Badlands as well
I bought these for my Sas bronco, but when I realized it's not for the sas trim. I returned. No point in having the wrong item
How are they working so far?
Good. It's been through some rain, and I could already see how they've completely stopped the splattering we were seeing on the sides.
I got the Mabett but dont like the graphics. And it seems from your install video that it can easily slide off if needed for off reading.
Yes, it is easy to take them off. Just twist off the thumb screws. 👍🏻