HOW TO TEST A CAR STARTER

Поділитися
Вставка
  • Опубліковано 30 вер 2024

КОМЕНТАРІ • 26

  • @owenndazizi6737
    @owenndazizi6737 Рік тому +7

    I didn't see the solonoid engaging

    • @cgcars3427
      @cgcars3427  Рік тому

      When you attach the positive to one side of the wire, test the other side of the wire to make sure you are getting power for sure. If you are getting power then the selonoid may be bad. How old is the car and how many miles?

  • @balbeppe7462
    @balbeppe7462 Рік тому +3

    Ma nel motorino nuovo, non esce l'escursione dell'ingranaggio.😮

  • @paulaur
    @paulaur 8 місяців тому +2

    No surprise this starter died, because you "banged it"

    • @cgcars3427
      @cgcars3427  8 місяців тому +1

      Hey genius, the starter was already bad hence why I took it out of the car. It gets stuck so I banged it and it worked for a little but too old, worn and rusted.

    • @markleach2177
      @markleach2177 5 місяців тому +1

      ​@@cgcars3427yep, if you get stuck somewhere you have to hit it to get home or where you're going.

  • @raitshots
    @raitshots Рік тому +2

    Nja you have to see if the coals are worn out. Moisture often gets inside the oil sand. It's for all cars. It is necessary to open, clean and change the carbons and clean the contacts.

  • @dawidkwiecien9938
    @dawidkwiecien9938 9 місяців тому +2

    👍👍👍👍

  • @just__dave
    @just__dave Рік тому +2

    Uhhh….

  • @calvinbom
    @calvinbom 10 місяців тому +1

    U joined those wires wrong mr

  • @MuhammadUmer-nc7tg
    @MuhammadUmer-nc7tg Рік тому +1

    ماشاءاللہ ❤❤❤

  • @gilbertkarmun8894
    @gilbertkarmun8894 11 місяців тому +1

    Are they. Inter changeable with tatest model starter

  • @alvarorecio
    @alvarorecio 19 днів тому

    I have a question, I see the motor rotation, but I dont see the gear qetting out

    • @cgcars3427
      @cgcars3427  19 днів тому

      @alvarorecio do you mean in my video or in your starter? When I apply power it spins, when installed in the vehicle it lines up with the flywheel.

    • @alvarorecio
      @alvarorecio 19 днів тому

      @@cgcars3427 in your video

  • @ThokozaneSiyabonga-l1i
    @ThokozaneSiyabonga-l1i 6 місяців тому

    Why the new one is goat a loop wire on but is not on the old one

    • @cgcars3427
      @cgcars3427  6 місяців тому

      They both are wired the same. May be hard to tell.

  • @patrickjobling8676
    @patrickjobling8676 Рік тому +1

    Excellent pilgrims 😁pip pips

    • @kemabosh3588
      @kemabosh3588 Рік тому +2

      Solonide was not doing its job on the new stater thou. Only spin but not moving foward

  • @gaamedjames3394
    @gaamedjames3394 Рік тому +1

    What??your testing a new one😊

    • @cgcars3427
      @cgcars3427  Рік тому +2

      What🤨? Just showing the process of testing it and that the test actually works.