THE WORST Cheap Transformer Devastator Knockoff (Under $20!)
Вставка
- Опубліковано 21 бер 2023
- This cheap Transformers Devastator from Ali Express costs under $20! But it has one MAJOR ISSUE preventing it from being even passable.
Buy the figure here!
www.aliexpress.us/item/325680...
Follow both my Instagram's!
/ mechazeereviews
/ zdbimages
Follow my Twitter!
/ mechazee
Support me on Patreon for $1 a month
/ mechazeereviews
Etsy Store!
www.etsy.com/shop/MechaZeeStore
Check out my other videos!
Cang-Toys HugeRhino (Predaking Combiner) - • The Curious Reason Why...
Generation 2 Optimus Prime Review - • Generation 2 Optimus P...
Legacy Hot Shot - • From OLD to GOLD! - Le...
Some of the music is from
www.tandess.com
Amazon Wishlist
www.amazon.com/hz/wishlist/ls...
Channels I recommend watching
/ @jobbythehong
/ @gei4mei
/ @zerogokinreviews - Комедії
I will concede as a fake Transformers fan I got some of the names wrong. I was in a silly little spot mentally when making this video.
The mistakes are being cut out via the UA-cam editor at 1:12 and 2:07. It might take a few hours to update. So if you see comments about it and don't hear me misname them that's what happened.
Thank you everyone for letting me know of my mistake and I do apologize. I will try to be better about it next time and I appreciate you all🫡
Wait you like furrys?
were do u bye it
@@eduardodelacruzsr4285as a furry, Catgirls do not count as furries. They’re just girls with cat features. A furry would be a cat with girl features.
Can I have that transformer transformer
Нормас
Of course it doesn't hold. You didn't connect it correctly. You need to insert the pegs of the arms under the chest on the holes first, then you need to place the back inside Longhaul's arms.
alright nerd
@@snjix. i dont see how it makes them a nerd when they are just trying to explain
@@snjix. No problem sweety
that guy didn't know what to write so he wrote "nerd"
@@snjix. why '' nerd ''
Jobby: "I know the word 'swivel' is spreading like cancer."
MechaZee: "You're probably tired of me saying 'detail' at this point."
Ну и...?
Found this in my aunt's shop, cost only 10 dollars in Malaysia lmao
This is a great cheap devastor. If you assemble it properly the large form works well and the miniature bots are quite well detailed. I will say though my version has die cast parts on all the robots.
I’ve got that one, too. Larger in scale, so works awesomely with larger figures!
I got a yellow version of this one for Christmas, but I lost the instructions paper. I am now looking for videos on how to combine them into Devastator.
Yeah, this works. I have the Combiner Wars one but I've run out of room so back to the box it went. This is perfect and the same as size as LE Volcanicus (if you stretch out both his legs) so, it works.
Funny thing is this is a knock off of a 3rd party combiner called hulkie (cause copyright) from the company dk9 more specifically from there war in pocket series.
Thank you. I was trying to figure out what this was a copy of. I figured it was a KO of a third party but there’s so many lol.
I got this exact set last month, and I love it. For the price I think it's great. I'm not sure if you got unlucky or combined it incorrectly but mine is solid as a rock, I can shake it around and it doesnt fall apart like yours does. The buyer i got it off used the generic stock images of the toys this is a KO of so it showed paint detailing and accesories (individual guns for each constructicon) that arent actually present in the set but considering the price I really dont mind. I love these little guys
do you have the link to it still?
He combined it incorrectly lmao
i just received this same set a few days ago. i was about to scream and complain "parts missing!!" to the seller till i saw this video honestly LOL and i agree, i thought it was a very solid figure when i finally figured it all out.
Yeah these 3p are hit or miss, but this is a hidden gem
I have this, and I absolutely love it. For £19 it's awesome (and I can't see the far more expensive Core Class Volcanicus matching up, tbh.)
I am so disappointed with the look of that Volcanicus. My hype for having core class dinobots has completely vanished.
I'm glad it's good, because it's on my wishlist. I want to collect mechas and I don't care for KO's and offbrands 😂
Hasbro needs to make a decent combiner that isn't 300-800 bucks
@@whoelsebutmeofcourseisame
Its $5
As an owner of a copy of this figure I can confirm that he put it on loose
So for me the front section just doesn’t connect properly when combining the two halves.
If the peg between the waist connection is loose, you can dab some super glue on it to make it thicker, or you can sand the pegs to make them more loose if their too tight.
Note: got these tips from JobbyTheHong.
Acrylic floor polish can be painted on any connection parts that are loose. Let dry (dries clear, of course), and assemble.
Well, for a under $20 knock off, it doesn't look too bad, honestly I would get this and just have it on my dresser or something until I actually get something to put my transformers on
(And please for the love of God, I hope him saying Bonecrusher was Scrapper and vice versa was a joke, as a Scrapper fan it hurt)
True
I noticed the same thing. Internal rage.
I've seen a few Devastator KOs that are much much worse lol.
Nice engineering (if not quality) luv Hook's crane hook becoming the chest wing for Devastator
Got the same but in the yellow version. No problem with the torso connection. Mine doesn't pop off like ur does. Pretty solid on my part.
I have a set of them to I'm trying to figure it now that I seen this video it helps thanks for reviewing figures
I remembered I found a Bootleg G1 Devastator toy. I and had to say, it is by far the most heart breaking thing I’ve ever bought because when I was a little shit. I thought it is a G1 Toy. But then it broke right away after I played with it. Once. But again, this was when I was like 4 years old.
Some nifty engineering ideas in that set, like the crane arm becoming Devastator's chest plate. But on the whole, I think I'll stick with my TFC Hercules.
ok, that dumpy on the dump truck/robot had me wheezing for 15 minutes straight 🤣🤣🤣
I own the set and I couldn't be happier with my purchase. Only thing that I wasn't happy with was the gun not staying with in the hand and it was an easy fix . You haven't done the combining correctly. Absolutely worth the money.
I've got this and I fitted mine correctly and it stands perfectly and I think it really is a great figure for the price
I had two versions of this ko its a solid set in my opinion some ones might be hit or miss but for the most part neat little figs
Bro the bulldozer is Bone crusher not scrapper and the pay loader is scrapper not bone crusher😂
Good review. I have the metal OSKO version of this mold
For the unresearched, like this video, this is a KO of the DX9 War in Pocket series Devastator, and yes he's transforming it wrong that's why it doesn't stay together
Very cool video mechazee reviews
I remembered having a bootleg devastator, it was my first ever g1 transformer figure
this would be good for a SS core class if it was upgraded
The quality of this reminds me of my childhood favorite Brave Police J-Decker Build Tiger
This looks cool and probably more practical assembly, i have the combiner wars KO, has issues with the separate vehicle transformations and with assembling Devastator, it's really like a puzzle, but once assemble, really has more of the old school Devastator look than this one does
i have this one, bought each of em separately, in tesco, in yellow instead of green. and i love it. u just neet to grit a little some tight pegs with sandpaper (if pegs are too tight)
I have this exact set. Its not as bad as initially thought. Combined mode arms are kinda stumpy though...
Trying to get the top and bottom to peg all at once wasn't working but starting with the front joints to back was pretty stable for me but the waist joints unpin for me for unwanted back crunches. It's mid and I was expecting worse.
FUN NOTES:
1: Scavengers bucket slides up closer to the chest. So no more empty space.
2: Mix Masters Purple mixer part can fit on the end of Devs purple rifle.
3: Some Lego weapons fit in the bots hands. The sizes do vary.
The alt modes look fire🔥🔥🔥
Not sure if you were unlucky , but I got one and was able to get the two pegs holding top and bottom in fine , and its pretty sturdy , the trick was leaving the arms sort of loose , and placing them one at a time . Anyway thanks for making the video as MY GOD are the instructions bad . still though I'd recommend it
I have one of these constructicon bootleg and it is good but I do not know how it will be with the others xd
That's a great Devistator. The Devistator I have is so bad they didn't have the Licensing for the Decepticon logo. I wish I had the Devistator in this video. Mine the arms won't stay attached.
this guy was cracking me up so much the whole time, that I kept forgetting whether this was knock-off or not...👍😂😄🤣 👍
I'm probably not the first to mention this as I'm pretty late to the party, but this KO is an oversized version of the DX9 legends scale Hulkie set. The original is a pretty fun little set :)
Great review 🎉thank you, can you share the link of the product? I think for 20 is amazing
Only honest review I can found about this KO Devastator. For the price, both the robot and construction modes are very fun to play with, but in the Devastator mode, I totally agree with the difficulty in securing the upper and waist together.
I got this guy off ali express and have had no problems except for the heels on them
This was my first devastator combiner, it was very good to play until mixmaster and long haul broke then i had to buy another one…
For the cash is a great set, paid around £13 for mine, in fact, i have one combiner and one in bot modes
I would still get this if you link the items description I would buy it because I just love devastator
I recommend moving the arm out and putting them to the back(i have this and i find it nice)
THIS IS SO COOL BECAUSE IS THE VOLTES V IS TRANSFORM IN THE ROBOT BEFORE THIS VIDEO ITS SO COOL
He's pretty cool. I would superglue him into Devastator mode and enjoy him that way FOR THE REST OF TIME.
It does kind of remind me of the Gobots from when I was a kid" yes I'm that. old ha ha"
i bought that a few years ago and the leg broke off when in combined mode after he fell off my very low table and on to my couch so thats a bit goofy
awesome video!! Has anyone seen a KO Menasor Under $20?
Once bought a knockoff FULL set of G-1 Arial-Bots at Flea-Market for $12 bucks on one large flat cardboard back piece with vacuum formed plastic cover holding all the bots in place , obvious knock off packaging but each one was surprisingly good build quality , no die-cast pieces though just plastic but they even had the balls to include all the AutoBot logos , the bots formed the combined Bot "Superion" without trouble , , , back in 2006 , later on I gave it to a friend for Christmas , , , ,
It’s funny how quick KOs change. I got a Quick Change Devestator around 2008, and the parts reduction goofiness on that pretty much ruined everything but the combiner. However, I’ve gotten KOs in the last, well, decade, that are solid. I recently got this Devestator only upscale with die-cast. He holds together pretty well, with maybe the arm connections not as tight.
@@ronaldpaterni5081 it's hilarious when TF gen 1 knock offs are better than current authentic mainline TF figures , 🤔🤪🤪
@@wyldelf2685 Yeah, I know the feeling. Some of the newest mainline figures are a little weird on articulation and plastic quality. At times it’s like they approach “old knockoff”quality, instead of advancing.
@@ronaldpaterni5081 especially when you consider the $ Price point they are asking , , ,
You messed up bonecrushers and scrappers names
My version is bigger bout an inch shorter than CW Bruticus. I really like it and no issues. The individual bots are Bumblebee Movie size deluxes.
I have a variation of this set that has purple marks in some bots and overall holds much better than this one it seems.
Getting the whole Set this year
i bought the same mixmaster's arm easily broke off and i cant turn it to devastator because the feet connection broke
First time watching any of your videos! Great review! The set looks neat, but not worth the $20! But I understand the challenges of building figures that small and on top of that squeezing so many features on them as to not have too many extra pieces as with the originals (love Hook's crane was made useful in combiner mode). But I feel pity for Long Haul! Seems to me he can't just get a decent enough design! The Combiner Wars design is the worst I've seen!
i had one and a love it so much but sadly the long haul legs broke :(
I actually liked it so much I ordered a second one
Wait where do you buy this? Mine is so hard to transformers and random tiny pieces keep falling off
well this is why you gotta spend a few hours doing le research of kos, the iron factory bruticus ko its neat tho
Couldn’t use crazy glue to harden the connection to the waist
I guess my copy is a little bit okay and it has some die cast parts in it but the gun is different than mine coz it separates to have all of them individual guns and I think there is also g2 colors for that one.
I managed to connect the 2 halves together by connecting the pegs while using my brain
i have this , its not a bad toy, you have to peg the one arm in first then the middle peg and combines peg in the back as well as use the tabs ont he crane hook to lock the shoudlers in better
gives me core class vibes.
I bought devastater the one from hasbro and i think its comeing next weekend
Best skibidi editor I've ever seen
No you’re talking about UTTV not Prime
@@DulceIgle this was 1 year ago youre late
Core class dinobots vs the core class constructicons!
I still want to get one, it's a good core class scaled figure, where could I get one?
And as someone who bought it, the ball joints do not hold after a couple transformations
Does anybody know where I can buy individual versions of these? I have the set but my bonecrusher broke while trying to fix its loose joints, and I need a replacement of him
I don’t know if you can buy them individually but I put a link in the description from the Ali seller I ordered from.
When Mike made Bayformers ROTF wrong
Mixmaster: head
G1: left leg
Hey I got this guy and he's awesome. Got the weijiang version and it built like a brick
I had a bootleg of this bootleg! it was absolutely awful so don't complain!
I have an upscaled KO version of this. It was much better quality and also for some reason each robot has one part in their chest made out of die cast.
I got this one its brilliant
for context, this seems to be a bootlegged version of a third party set called Mech Fans Toys Hercules
Mine is fine it has some loose parts on the individuals but the combiner is solid and stays put
If someone could help me with the loose part it would help a lot
I got hook and bone crusher if u dont be careful the legs will loosen and the arms
Nah, bro. I got the same one, and I absolutely love it.
I got this a long time ago and I did not even get instructions
i think i also have that but it doesnt fall
These look kinda fun ngl
Yea full review :)
I think that’s when you just glue it together lol
dude i had that but it was yellow and purple
You got scrapper and bonecrusher mixed up
It looks nice
I have them and I really like them
Boncrusher is actually called scrapper
There is a upscale with metal parts which is better
Outrageous other reviews devastator dont fall apart
Where can I get this
Yooo
I have this Bootleg devastator I baught it last year cost 550₱ from shopee (because I'm from the Philippines) because it's on sale and I still have it no Broken parts and stuff
I got this devastator but Long haul broke and I can’t fix him
i have it and its pretty good
He got confused over Scrapper and Bone Crusher.
i somehow got a knockoff of a knockoff of this where it costed 60$ instead