Awesome video! I really appreciated that you just let there be some silence in-between parts and you didn't go with any kind of high anxiety UA-cam song to fill it. I really appreciate that. Great video man.
Amazing work. I just broke the antenna holder on one of the four. But with this much hassle I guess I'll just leave it. What's broken is just about the last piece you removed.
What was the issue with your fan? I have a *brand new pair* and the fan isn't running, and they keep rebooting after a few minutes. Is this a hard repair? DJI wants 15 days to do a replacement.
Hi. I think my power supply board has blown, goggles don't power on and I can smell that faint burnt circuit smell, I can find replacement V2 boards but not V1, do you think the V2 board would be compatible? Thanks for the comprehensive video.
After all that you STILL didn't get into the optics where you could clean a stray hair off a lens or screen. Any advice for going further? Is it possible? Thanks for a breakdown of a complicated disassembly!
Could I essentially take a pair apart and hardwire a tablet or screen instead of projecting into the eyepiece to make a STANDALONE dji fpv MONITOR. I know u can be wired to a pair and use the app and alll that. But can I make a stand alone monitor based around the actual video Rx?
How hard would it be to replace the USB-C/ MICRO SD Slot Board on the front side of the Goggles. It almost seems like you could get it from the front, but from your videos it seems that you might have to tear it down completely like you did to get that outside panel off... i found a replacement and now that i see it uses a ribbon cable, i would love to replace it bc its not too expensive for the part and then i would have a tight usb-c port again. I bought them with the dji fpv drone so i could basically get best of both worlds plus a dji remote controller 2 to start out with or I have frsky, but want a TX16S w/ crossfire. Do you think its worth the trouble of taking it apart to replace the usbc port board? Im pretty sure you can connect it to your phone and then someone can watch the live view on the phone and it should have audio also. I always wear my headphones i love having the audio on low in the background lol.. I have the V2s but theyre basically the same i heard. did you not use the A/V out port for video out in the past when the usb c video out wasnt working yet? Geat videos and really applies to the new air unit as well, theyre very similiar in how they work and seyup, wiring, programming, etc..
so my top 2 antenna connectors are loose, thats why I came here. Definitely 10 of 10 even for experienced hands. This was my experience working on my other DJI products. Why, I have to ask myself?
really interesting. I find that max IPD (inter pupillary distance) is not 70mm on mine. From your point of view, is there a way to increase by 1mm / 1.5 mm the IPD ? it seems to be possibe in the video at 15h50 by trim 2 slot screw and external side of lenses.
@Whiskey Mystery That would totally work but you would need everything from two sets of goggles except one LCD panel from each combined into one headset. Then two air units / vistas and cameras on the quad. Good luck 👍
@@changeagent228 I got it flying using two sets of goggles striped down so that my left eye could look in to the left goggles (right eye slot) and my right eye could look into the right goggles (left eye slot). And yes two air units. The 3D view was stunning UNTIL! either camera lagged due to frame drop then everything would go out of sync for a moment. Sadly not going to work unless L and R views go through the same signal feed.
@@WhiskyMystery Ah yes of course. Ok try a third headset as primary and the other two as spectators. Spectator mode does not re-request frames. Of course if you have breakup it will look awful but if you stay line of sight and keep the power high it should work. Let us know how you get on. Well done so far. 👍
Hey mate, quick question my mate i fell in to a stream while doing a shoot with googles on. I believe the power was not on by the time we hit water. What do you recommend at this stage to fix it. I haven’t powered it up or done anything to it. Its just dried outside and maybe there could be water inside. Still couple of months old. Appreciate an answer mate :)
Honestly take them apart and make sure they are dry and clean before powering up. Wash down the parts that have any corrosion with iso and then reassemble. Don’t use rice that is a myth. But the other way is how we get 90% of water damaged phones working again.
Don’t use anything on the lcd screens. Clean all up first then power them up. If the screens are messed up then you will be out of luck unless you want to stare at water look
Can the lens covers be removed easily, I need to polish out some small scratches on then and would prefer to remove them to polish the scratches, thanks.
you guys need to stop repeating hype bullshit and stay in the real world. SMA barely wear out in a year. worst case you open the goggles and pop in new UFL
since you tear down and rebuild these let me ask you this . does this goggle have a actual fan that removes heat from the eyecup area ?i know it has a fan that cools the electronics but i am more interested in if it has a actual fan to reduce fogging in the eyecup area ? i ask because i sweat easy and fogging is a issue with most goggles for me .
Hey brother.. just a thought. If my DJI goggles break? Can you fix Still.. are there parts? Point of question . Man allot of money there.. great job again!
DJI FPV goggles breakdown- 21 things I think about them: 1. You should spend the extra $15 for the not included extra cushiony foam padding accessory or 3rd party option. That's a given. 2. No audio is transmitted to goggles. Deal killer for many. Not so much for me, I can fly without it. 3. They feel like wearing a brick on your face. You'll spend some time working on the fit to get them tolerable to your face. 4. You have to wear a 4s battery on the back of your head to balance out the weight of the goggles in the front that make your face droop down. 5. You need an SMA female (female pin) to RP-SMA male (female pin) Adapter to use them with other antennas. 6. The OSD only supports some of the data: List here: air-war.org/Graphics/DJI%20Supported%20OSD%20Elements.jpg 7. OSD font can't be changed, and is tiny and white variable width font that is lost on a bright background. I switch off OSD entirely as unusable. 8. Fan will blow under your glasses into your eyeballs. Not enjoyable. 9. No HDMI output port. You can get HDMI output if you buy another $600 DJI controller, but... not worth it. 10. Goggles in Audience mode can't request to retransmit garbled frames or packets from air unit, so reception will be noticebly worse than on master goggles. 11. Air unit gets frigging hot fast sitting on the bench even in 25mw power mode. Blow a very aggressive fan on it. 12. Changing regional country area and max output power up to 1200mw is a trivial matter of dragging on two text files to the goggles 13. You will need to register a DJI account and provide email address just to activate and upgrade firmware on either goggles or air unit. Deal killer for many, including myself - I setup a warez account with bogus email address. 14. A channel bonded 50mbs mode is now supported. Nice but not revolutionary - 5ghz wifi routers have been doing it for years. Free freqency map by Propwashed showing upon what frequencies the channels fall upon (or step upon) is here: air-war.org/graphics/5ghz%20Frequency%20Chart%2050mghz%20DJI.jpg 15. No geofencing as far as I know, but I haven't tested in off limit areas such as Area 51 or over the White House Lawn yet. 16. The video image is the best currently out there, but it's not imax or a religious experience. Two screens displaying the exact same pixles in the exact same location for two different eyeballs is a waste of money ihmo. I'd rather have box goggles and get 2x more unique pixels instead. 17. Range is pretty fantastic... supposedly up to 6km LOS; 10km LOS with directional high gain antennas. Top antennas transmit and recieve. Bottom antennas recieve only. 18. Despite what reviewers say, I still would rather fly in 16:9 instead of 4:3 and stretch the image in post. 19. The front face plate is removable with two screws, and you can put an adapter on it for FatShark style analog reciever modules, or hydrodip the front face place to personalize it. Switching to analog isn't seamless (i.e. you can't use buttons on side), you have to drill down the menus to AV input, and also.. if the feed gets staticy it will blank out the image entirely to screensaver. The menu system is easy to use. 20. I think the recorded DVR quality is pretty acceptable, *if* you can fly your quad super smooth without vibration (as there is no image stabilization). Latest Betaflight adds more filtering and you can tweak out vibration even more looking at the blackbox data... so... it's no GoPro 8 or Insta360 One R, but... it's fine and acceptable. The 720p recordings hide vibrations and jello better than the 1080 higher resolution I noticed, so... you may find better image quality actually by bumping the record setting down to 720p. 21. Should you buy them? I can't answer that for you. I hate mine, but then I'm a new consumer coming from a Gaming environment with 1080p 23" mnitors and not an old school quad builder that suffered with analog for a decade before hand.. What are you going to do, they are still the best out there :-/ I hate mine so much, I'd rather just not go out and fly with them, and I'd rather just stay home and play in Liftoff instead. It is what it is. If you do want to buy them, DJI has sales on their products right before Father's Day, maybe Christmas too, so you can save $50 bucks and buy them then. This is what it feels like to me wearing the DJI FPV goggles. esp with glasses also on, a 4s Liion pack on my back head, and long range antennas jutting out the front. Did I mention the air blowing on your eyeballs. I did. It's not enjoyable: www.indiewire.com/wp-content/uploads/2017/04/facehugger.jpg What I did was drag some FPV video files off UA-cam onto the SD card, and just had to sit around at the house for many hours trying to adjust the fit and get as use to them as best I could and watch pre-recorded video on them. Still, I'd rather not wear them, and hate putting them on. I'm probably the biggest hater of them, however, so I guess take that with a grain of salt. fpv.air-war.org
I think I wasn't clear.. Is it possible to remove the internal video transmitter from the dji fpv drone and use it in another drone lets say? Im asking because I saw there are two boards interconnected, one might be the main board, the other might be the vtx but I'm unsure.
@@joaovictorf.carvalho458 It could be possible I don’t know anything about the DJIFPV drone specifically but drones in general are usually just a bunch of components put together so I don’t see why it wouldn’t
Excellent, Ill try to investigate further.. this is a good "solution" for someone who crashed and wants to move the video system to another drone. Appreciate your reply
Hi, my V2 sometimes power up but left eye remains black. I have to restart them to get both screens working. Do you think this is fixable? it may be some loose connector, right?
Moving the screens, rather than moving the optics only in the binocular system when adjusting the IPD setting must be why the DJI doesn't seem to get much edge distortion since the optics are always directly in line with the screens.
Sorry for delay I had no alert to your message I only discovered when I returned to this video. There's no official announcement for one that fits on a set of Fatsharks and such. DJI issued a standalone module for racing events that outputs low latency but you can't buy it. You can get the smart controller for $700 which gives you hdmi out but it has 100ms latency so is only good for spectators. There are a few folks working on a cheaper hack using a raspberry pi but it also has bad latency and also suffers frame distortion like seen running a secondary headset in spectator mode.
Hello . Thank you for this impressive job ! with all the knowledge you have of the inside of the google is there a way to access to the lcd without do the full tear down ? (Today a yellow spot appear on my right screen) for me il doesn't look to be a dead pixel but a kind of dust I hope to try to remove .. Do the full tear down exceed my confidence in my skills even if a tear down and rebuilt some of my phones :) .. thank you for your work. Regards
ive got the same thing, yellow marks on the screen. did you figure it out? is it burns from the sun on our lcds? from leaving our goggles facing upwards into the sun.
Outstanding video, can't wait for part 2. Could you tell if there are 2 separate displays, one for each eye? So far it looks like there are two separate HD screens that can move.
Is there any way that the parts can be adapted to create a Digital HD Monitor? I can't use goggles only monitors due to Visual impairment, so I'm locked out of this technology.
Im not really sure I noticed that too. In person its awesome but for some reason on the camera its not. Maybe because it is led lights and the frame rate?
One thing: av OUT! analog by av in, or by usb port please dji !!!! ;) I don't have so much money to buy the dji smart controller .. it will only be a usb to hdmi cable and a firmware update, if you can do it and receive the signal on your googles, why not av or hdmi out via usb ???? it is for broadcast video for others on a screen or live broadcast but not at
Awesome video! I really appreciated that you just let there be some silence in-between parts and you didn't go with any kind of high anxiety UA-cam song to fill it. I really appreciate that. Great video man.
Nice Tear down...Cant wait for part 2
Thank you for this tutorial. I was able to use it to remove dirt and dust from the inside of my goggles.
I'd love to see it crammed into a smaller case. I hate how much space these take in a bag compared to my old goggles
Thanks for the video I just gave you your 1000th subscriber.
Thanks man. I just ordered some fresh packs from pyro hoping next week I can get some flight time in again!
Amazing work. I just broke the antenna holder on one of the four. But with this much hassle I guess I'll just leave it. What's broken is just about the last piece you removed.
My thoughts exactly
Manage to fix it , i have the same problem
@@lappinzswizzy I didn’t fix it. It is just hanging out- gluing it into place didn’t keep.
@@seb-depp i cant even screw my antenna into it as it just pushes into the goggles
@@lappinzswizzy Bummer! Maybe you have to open it up, then. Or send it to DJI - their repair prices seem reasonable to me.
I just wanted to see how the SMA connectors are mounted since I have a broken SMA bracket. Not going down this road.
Thanks for making this! Saved me the trouble (quite a bit of it, by the look of things!)
Thanks for sharing this - it gave me the confidence to take apart my goggles and fix the fan myself :)
What was the issue with your fan? I have a *brand new pair* and the fan isn't running, and they keep rebooting after a few minutes.
Is this a hard repair? DJI wants 15 days to do a replacement.
@@JBradHarris check out the video on my channel
Hi. I think my power supply board has blown, goggles don't power on and I can smell that faint burnt circuit smell, I can find replacement V2 boards but not V1, do you think the V2 board would be compatible? Thanks for the comprehensive video.
After all that you STILL didn't get into the optics where you could clean a stray hair off a lens or screen. Any advice for going further? Is it possible? Thanks for a breakdown of a complicated disassembly!
Muchas gracias ❤
Hello, I'm from Brazil, I have the dji goggles and I need to repair the back button, do you know where the BLD1920 board is sold.
Could I essentially take a pair apart and hardwire a tablet or screen instead of projecting into the eyepiece to make a STANDALONE dji fpv MONITOR. I know u can be wired to a pair and use the app and alll that. But can I make a stand alone monitor based around the actual video Rx?
How hard would it be to replace the USB-C/ MICRO SD Slot Board on the front side of the Goggles. It almost seems like you could get it from the front, but from your videos it seems that you might have to tear it down completely like you did to get that outside panel off... i found a replacement and now that i see it uses a ribbon cable, i would love to replace it bc its not too expensive for the part and then i would have a tight usb-c port again. I bought them with the dji fpv drone so i could basically get best of both worlds plus a dji remote controller 2 to start out with or I have frsky, but want a TX16S w/ crossfire.
Do you think its worth the trouble of taking it apart to replace the usbc port board? Im pretty sure you can connect it to your phone and then someone can watch the live view on the phone and it should have audio also. I always wear my headphones i love having the audio on low in the background lol..
I have the V2s but theyre basically the same i heard. did you not use the A/V out port for video out in the past when the usb c video out wasnt working yet?
Geat videos and really applies to the new air unit as well, theyre very similiar in how they work and seyup, wiring, programming, etc..
Cool video man, just got my pair, you saved me from my curiosity
so my top 2 antenna connectors are loose, thats why I came here. Definitely 10 of 10 even for experienced hands. This was my experience working on my other DJI products. Why, I have to ask myself?
Watching this gives me anxiety lol
Lol
DJI authorities : let's make the goggle with so many screws that if anyone tries break in, would get tired putting out screws
what's the screw type of headband mounting plate ?
Sorry for a dumb question...what size are the screws in front that holds the aluminum cover...must buy new ones
really interesting. I find that max IPD (inter pupillary distance) is not 70mm on mine. From your point of view, is there a way to increase by 1mm / 1.5 mm the IPD ? it seems to be possibe in the video at 15h50 by trim 2 slot screw and external side of lenses.
Much appreciated. I am tearing down two goggles to try and combine them into a stereoscopic (3D) digital system.
That sounds mind-boggling. I dont think anyone has ever achieved 1080p 60fps (or 720p 120fps for that matter) 3d fpv video. Ever.
@Whiskey Mystery That would totally work but you would need everything from two sets of goggles except one LCD panel from each combined into one headset. Then two air units / vistas and cameras on the quad. Good luck 👍
@@changeagent228 I got it flying using two sets of goggles striped down so that my left eye could look in to the left goggles (right eye slot) and my right eye could look into the right goggles (left eye slot). And yes two air units. The 3D view was stunning UNTIL! either camera lagged due to frame drop then everything would go out of sync for a moment. Sadly not going to work unless L and R views go through the same signal feed.
@@WhiskyMystery Ah yes of course. Ok try a third headset as primary and the other two as spectators. Spectator mode does not re-request frames. Of course if you have breakup it will look awful but if you stay line of sight and keep the power high it should work. Let us know how you get on. Well done so far. 👍
@@changeagent228 Ah you forget there are two separate cameras transmitting from the quad :-)
that hydro is going to look nuts, can't wait to see it :)
My goggles are outbof warranty and the screens just went black. Everything else turns on, so im gonna go digging.
And now i need to but a new skinny long screw driver for those last bottom 2
Nice 👍
Hey mate, quick question my mate i fell in to a stream while doing a shoot with googles on. I believe the power was not on by the time we hit water. What do you recommend at this stage to fix it. I haven’t powered it up or done anything to it. Its just dried outside and maybe there could be water inside. Still couple of months old. Appreciate an answer mate :)
Honestly take them apart and make sure they are dry and clean before powering up. Wash down the parts that have any corrosion with iso and then reassemble. Don’t use rice that is a myth. But the other way is how we get 90% of water damaged phones working again.
Don’t use anything on the lcd screens. Clean all up first then power them up. If the screens are messed up then you will be out of luck unless you want to stare at water look
Thanks for the reply mate. Ill try doing what you suggested and hope for the best. Thanks again
Can the lens covers be removed easily, I need to polish out some small scratches on then and would prefer to remove them to polish the scratches, thanks.
Watched this to figure out how to remove top mount point - thank you :)
Is the power board same as the v2?
Could the RPSMA connectors be replaced with SMA connectors with new cables?
kenkamm wow good idea and yes they could. The other end is a ufl. But it would require the teardown
Sma adapters are negligible loss
SMA connectors are not good, they will worn out the connector side, not the antenna side which mean cheaper to replace the antenna once it worn out
Arief Adha is correct! RP-SMA is the better way. Somewhere along the line the community got it all wrong.
you guys need to stop repeating hype bullshit and stay in the real world. SMA barely wear out in a year. worst case you open the goggles and pop in new UFL
since you tear down and rebuild these let me ask you this . does this goggle have a actual fan that removes heat from the eyecup area ?i know it has a fan that cools the electronics but i am more interested in if it has a actual fan to reduce fogging in the eyecup area ? i ask because i sweat easy and fogging is a issue with most goggles for me .
Hey brother.. just a thought. If my DJI goggles break? Can you fix Still.. are there parts? Point of question . Man allot of money there.. great job again!
Can I ask you what you think about those battery powered screwdrivers?
Do you have a link for replacement screen?
juneloko619 l not at all. DJI only I’m afraid
It kind of looks like they are dual display, not a single screen like I though, or are the 2 pads deceiving?
S Ali Imam On another video I do, I tear the goggles down and they are dual display
Hi link for part 2 pls sir 🙄
DJI FPV goggles breakdown- 21 things I think about them:
1. You should spend the extra $15 for the not included extra cushiony foam padding accessory or 3rd party option. That's a given.
2. No audio is transmitted to goggles. Deal killer for many. Not so much for me, I can fly without it.
3. They feel like wearing a brick on your face. You'll spend some time working on the fit to get them tolerable to your face.
4. You have to wear a 4s battery on the back of your head to balance out the weight of the goggles in the front that make your face droop down.
5. You need an SMA female (female pin) to RP-SMA male (female pin) Adapter to use them with other antennas.
6. The OSD only supports some of the data: List here: air-war.org/Graphics/DJI%20Supported%20OSD%20Elements.jpg
7. OSD font can't be changed, and is tiny and white variable width font that is lost on a bright background. I switch off OSD entirely as unusable.
8. Fan will blow under your glasses into your eyeballs. Not enjoyable.
9. No HDMI output port. You can get HDMI output if you buy another $600 DJI controller, but... not worth it.
10. Goggles in Audience mode can't request to retransmit garbled frames or packets from air unit, so reception will be noticebly worse than on master goggles.
11. Air unit gets frigging hot fast sitting on the bench even in 25mw power mode. Blow a very aggressive fan on it.
12. Changing regional country area and max output power up to 1200mw is a trivial matter of dragging on two text files to the goggles
13. You will need to register a DJI account and provide email address just to activate and upgrade firmware on either goggles or air unit. Deal killer for many, including myself - I setup a warez account with bogus email address.
14. A channel bonded 50mbs mode is now supported. Nice but not revolutionary - 5ghz wifi routers have been doing it for years. Free freqency map by Propwashed showing upon what frequencies the channels fall upon (or step upon) is here: air-war.org/graphics/5ghz%20Frequency%20Chart%2050mghz%20DJI.jpg
15. No geofencing as far as I know, but I haven't tested in off limit areas such as Area 51 or over the White House Lawn yet.
16. The video image is the best currently out there, but it's not imax or a religious experience. Two screens displaying the exact same pixles in the exact same location for two different eyeballs is a waste of money ihmo. I'd rather have box goggles and get 2x more unique pixels instead.
17. Range is pretty fantastic... supposedly up to 6km LOS; 10km LOS with directional high gain antennas. Top antennas transmit and recieve. Bottom antennas recieve only.
18. Despite what reviewers say, I still would rather fly in 16:9 instead of 4:3 and stretch the image in post.
19. The front face plate is removable with two screws, and you can put an adapter on it for FatShark style analog reciever modules, or hydrodip the front face place to personalize it. Switching to analog isn't seamless (i.e. you can't use buttons on side), you have to drill down the menus to AV input, and also.. if the feed gets staticy it will blank out the image entirely to screensaver. The menu system is easy to use.
20. I think the recorded DVR quality is pretty acceptable, *if* you can fly your quad super smooth without vibration (as there is no image stabilization). Latest Betaflight adds more filtering and you can tweak out vibration even more looking at the blackbox data... so... it's no GoPro 8 or Insta360 One R, but... it's fine and acceptable. The 720p recordings hide vibrations and jello better than the 1080 higher resolution I noticed, so... you may find better image quality actually by bumping the record setting down to 720p.
21. Should you buy them? I can't answer that for you. I hate mine, but then I'm a new consumer coming from a Gaming environment with 1080p 23" mnitors and not an old school quad builder that suffered with analog for a decade before hand.. What are you going to do, they are still the best out there :-/ I hate mine so much, I'd rather just not go out and fly with them, and I'd rather just stay home and play in Liftoff instead. It is what it is. If you do want to buy them, DJI has sales on their products right before Father's Day, maybe Christmas too, so you can save $50 bucks and buy them then.
This is what it feels like to me wearing the DJI FPV goggles. esp with glasses also on, a 4s Liion pack on my back head, and long range antennas jutting out the front. Did I mention the air blowing on your eyeballs. I did. It's not enjoyable: www.indiewire.com/wp-content/uploads/2017/04/facehugger.jpg
What I did was drag some FPV video files off UA-cam onto the SD card, and just had to sit around at the house for many hours trying to adjust the fit and get as use to them as best I could and watch pre-recorded video on them. Still, I'd rather not wear them, and hate putting them on. I'm probably the biggest hater of them, however, so I guess take that with a grain of salt.
fpv.air-war.org
Some good chit here
It whould be soooo sick if there was an dji fpv goggles "slim edition", more like the fatshark design.
Is it possible to use the video transmitter from the dji fpv drone standalone connected to a camera?
You can hook the DJI camera in transmitter to 12 V source and use the goggles it doesn’t have to be a drone
I think I wasn't clear.. Is it possible to remove the internal video transmitter from the dji fpv drone and use it in another drone lets say? Im asking because I saw there are two boards interconnected, one might be the main board, the other might be the vtx but I'm unsure.
@@joaovictorf.carvalho458 It could be possible I don’t know anything about the DJIFPV drone specifically but drones in general are usually just a bunch of components put together so I don’t see why it wouldn’t
Excellent, Ill try to investigate further.. this is a good "solution" for someone who crashed and wants to move the video system to another drone. Appreciate your reply
Hi, my V2 sometimes power up but left eye remains black. I have to restart them to get both screens working. Do you think this is fixable? it may be some loose connector, right?
Thanks for the teardown man! You're nuts lol... Did I see that right... the screens move?
Yeah believe it or not the screens actually move I thought that was weird too. Wait until you see what I do to the housing lol.
Moving the screens, rather than moving the optics only in the binocular system when adjusting the IPD setting must be why the DJI doesn't seem to get much edge distortion since the optics are always directly in line with the screens.
nothing to do with that, they all do
Hello cappa fpv, may I ask how did the video receiver module feed the video to the screen or the display of the goggle
YTFPV not quite sure but what is known is it is encoded. I know where your going with the question I just wish it was possible.
@@cappafpv ok got it, dont know what to say, dji is dji😂
Can someone tell me where i can find spare parts for this goggles? i need the PDB! PLS HELP ME =)
Hello, could anybody help me
I need to know the size of screws for head strap bracket?
Can you confirm which IC chips are being used on the main board? Bytefrost uses the Divimath DM5680 and the Analog Devices AD9361.
Change Agent I have already put it back together at this point I’m sorry
@@cappafpv No worries. 👍
Sorry for delay I had no alert to your message I only discovered when I returned to this video.
There's no official announcement for one that fits on a set of Fatsharks and such. DJI issued a standalone module for racing events that outputs low latency but you can't buy it. You can get the smart controller for $700 which gives you hdmi out but it has 100ms latency so is only good for spectators. There are a few folks working on a cheaper hack using a raspberry pi but it also has bad latency and also suffers frame distortion like seen running a secondary headset in spectator mode.
Hello . Thank you for this impressive job ! with all the knowledge you have of the inside of the google is there a way to access to the lcd without do the full tear down ? (Today a yellow spot appear on my right screen) for me il doesn't look to be a dead pixel but a kind of dust I hope to try to remove .. Do the full tear down exceed my confidence in my skills even if a tear down and rebuilt some of my phones :) .. thank you for your work. Regards
ive got the same thing, yellow marks on the screen. did you figure it out? is it burns from the sun on our lcds? from leaving our goggles facing upwards into the sun.
Outstanding video, can't wait for part 2. Could you tell if there are 2 separate displays, one for each eye? So far it looks like there are two separate HD screens that can move.
Shannon Smith yes each eye has a screen that moves independent of each other. Pretty slick
could you take highres photos of the electronic components? I'd like to see the markings on them
Sorry it already back together at this point :(
what did you think if it?
the motherboard is made of just a few large chips, incredible integration, very cell phone like
Is there any way that the parts can be adapted to create a Digital HD Monitor?
I can't use goggles only monitors due to Visual impairment, so I'm locked out of this technology.
I highly doubt it. HDMI out, too an external monitor from the Goggles is your only option.
So many screws!! Awesome teardown.
I know I was damn I hope I can remember where they all go lol
gracias de los pilotos Españoles del Saeta.
would you dare to put a switch? I want to put it inside to turn it on and off
awsome dont know how but the head band screws cracked off??? No idea, so thanks for the quick no bs breakdown!
Take apart the air unit !!
Most people in the FPV hobby are wondering if it can be made smaller by removing the outer heat sink casing
My very first DJI FPV video the unboxing one I take the air unit apart.
lighting! so frustrating can't see
That lighting is bad man. What is wrong with it?
Im not really sure I noticed that too. In person its awesome but for some reason on the camera its not. Maybe because it is led lights and the frame rate?
@@cappafpv Could be, Maybe hit up bigclivedotcom he's using led bench lights and does stuff with his exposure to get it to look normal.
💪💪👊👊
One thing: av OUT! analog by av in, or by usb port please dji !!!! ;) I don't have so much money to buy the dji smart controller .. it will only be a usb to hdmi cable and a firmware update, if you can do it and receive the signal on your googles, why not av or hdmi out via usb ???? it is for broadcast video for others on a screen or live broadcast but not at
Where is Part 2 =D
Yoschi LL part 2 and 3 are on my UA-cam page
Arghh show me the painted casing already :)
Bionic24 in time!
Held
Poor lighting, the disassembly is very dim, contrast and lighting is focused on your hands
Reggie Busaing thanks for the view love you too
Thats why, i bought fat shark goggles
16 minutes screwing 😂
cellphone repair ?? please message me
What did you need?
CaribbeanZapatta if you don’t mind message me on my website. Irepairdr.com. I don’t know how else to message you to get specifics on each device.
11 mins of the video is just only putting out screws -_-
I cant stand the rolling bars on the video GAHHHHHH.
Boosted420A0135 it’s a combo of the frame rate on the GoPro and a led light I used above it. I didn’t realize it was still on 60fps.