A great video these are really good surveyors I like the fact they did all that without the need for all the fancy equipment and still did it perfectly. Cheers. I would watch more like this I love to learn from people can show a more simple way to do this.. Thanks for sharing.
The decision of base point reference with respect to the site needs to be explained how it is decided? What can we do if we need to use JCB to dig a foundation ?
sir aapne bht jaldi ye vedio bnayi. sir ap bht ache se samjhate ho. agr aap aisi vedio bna diya karoge to kisi boys ko training ki jarurat nahi pda karegi
Dear Mohan, I have for the first time seen a useful video on construction, very practical, thanks so much. Mohan I have a suggestion, you make a DVD with all such step by step construction videos starting from this foundation laying video. However you have to refer back to the plan document and show comparing to the plan paper. Also you did not explain how you started out on the base like and what it refers to in the plan. I hope you will continue to post these wonderful videos, I am ready to buy such a video which shows end to end construction for a layman like me even if it costs Rs 5000. But as in this video it should be understandable to even laymen like me. I am sure you will sell millions of your DVD's. ALL THE BEST Mohan. Thanks Prakash.
thank you sir... aapne bahut hi badiya video banaya hai & bahut achhe se sabhi chizo ki explain with kiya & practically karke bhi samjhaya.... thank you so much again...
Marking is not parallel to the road. It's essential to maintain foundation line parallel to the road duly maintaining the prescribed offset using 3-4-5rule.
ek questions bhi hai sir ki.. aapne columns ki marking de di or peg bhi laga di, par jab excavation hoga tab ye peg to hat jayenge....to fir hum measure karenge wo bhi bina koi marking ke...??
what is the size of the square markings marked with chalk power it is 3 feet X 3 feet or 4 feet X 4 feet ? I am using your video to measure lengths using computer program. Your information will be helpful to me.
First of all we need a Centerline drawing and a set-out drawing. Set-out drawing which shows the site plan and setback of the building , with that drawing we get the base line of the building after tieing those base lines we use centre line drawing to tie all the inner wall.
After excavation how can you take refferance from which point before excavation your peg will be removed then after excavation how can you take refferance where you marked before upload such video check carefully got it my point
Mr. K. Venkat Raman and others ones your video is very nice , Can you tell me what is the size of square iron frame that you had used in video with Chalk marking?
A great video these are really good surveyors I like the fact they did all that without the need for all the fancy equipment and still did it perfectly. Cheers. I would watch more like this I love to learn from people can show a more simple way to do this.. Thanks for sharing.
One of the best videos I saw on foundation layout
i have never seen before a such good tutorial video like this.thanks for your tutorial
The most practical , easiest and best way of foundation laying…. Salute to you Sir!
Thanks brother for well demonstration. Keep it up and share your experiences to new comers.
Thank u sir bahut hi intresting video hai once again thank you
Good demostration boss keep on giving us knowledge
Good job my brother...this help me a lot
Interesting I love it ... Simple way of marking without any confusion ..
Tell me how to mark the 1st point
I benefitted a lot from this video
It is the best dude keep adding more
Thank u very Much..This video is very helpful for me
Informative video thanks a lot sir
Really awesome sir..loved it
Excellent video and good demonstration sir. Looking for more videos.
The first two points are consider as
1.outer boundary point (or)
2. base point of the road
Thanks sir ji
Moh
Nemat Boos w4ee
Mohan A hhh
in Dan.sex.
The decision of base point reference with respect to the site needs to be explained how it is decided? What can we do if we need to use JCB to dig a foundation ?
You may use Total Station for demarcation
Ooll
This is useful for the people who doesn`t have basic knowledge
sir aapne bht jaldi ye vedio bnayi. sir ap bht ache se samjhate ho. agr aap aisi vedio bna diya karoge to kisi boys ko training ki jarurat nahi pda karegi
GOOD JOB BROTHER A.MOHAN THANKS FOR SHARING
I watching your videos 2024 very helpful video
Dear Mohan, I have for the first time seen a useful video on construction, very practical, thanks so much. Mohan I have a suggestion, you make a DVD with all such step by step construction videos starting from this foundation laying video. However you have to refer back to the plan document and show comparing to the plan paper. Also you did not explain how you started out on the base like and what it refers to in the plan. I hope you will continue to post these wonderful videos, I am ready to buy such a video which shows end to end construction for a layman like me even if it costs Rs 5000. But as in this video it should be understandable to even laymen like me. I am sure you will sell millions of your DVD's. ALL THE BEST Mohan. Thanks Prakash.
uk
Study 10th grade maths geometry..
3:01 superb sir ... Within 2 sec .. totally clear my daut regarding right angle method
thank you sir... aapne bahut hi badiya video banaya hai & bahut achhe se sabhi chizo ki explain with kiya & practically karke bhi samjhaya.... thank you so much again...
Good information sir tnk u so much
Good idea ser the best
You nailed this. Very lucid!
Good video ..thanks for sharing ..
It is a great video..very helpful...:)
Literally helpful 🥰
slam sir i am very thank ful to u it is very help ful lecture
Bharath university ❤️❤️🔥🔥🔥
Very much informative video, great job, well done
you are great sir 👏
Thank you so much sir, helped a lot 😊
Very useful video. Thanks.
nice practical sir.......😎😎
This video is very helpful.
Thanks for uploading such video.
How to fix base point ?
No one telling how to set base line😢
Marking is not parallel to the road. It's essential to maintain foundation line parallel to the road duly maintaining the prescribed offset using 3-4-5rule.
Nice information...👌
How to take measurements for Diagonal?
Marking column is required before excavation... Otherwise it difficult to find the center of column...
I learned foundation mark from this vedio thank sir
ua-cam.com/video/hzhVwP0LKBs/v-deo.html
The video is very helpful and understanding easily. Tnx sir
Thanks
Ys
upload more marking video sir pls
Upload more vdos
ek questions bhi hai sir ki.. aapne columns ki marking de di or peg bhi laga di, par jab excavation hoga tab ye peg to hat jayenge....to fir hum measure karenge wo bhi bina koi marking ke...??
Thank for helpful 👍
really very useful video for freshers sir. thank you so much sir. please update more civil engineering related videos. all the best for hardwork
what is the size of the square markings marked with chalk power it is 3 feet X 3 feet or 4 feet X 4 feet ? I am using your video to measure lengths using computer program. Your information will be helpful to me.
Agar pile kajer khobor nai
Great and awesome
sir, how did you know where to mark the first two points on the ground ?
I think that the base line is the outer wall boundary.
Saurabh Bhayaje
Saurabh Bhayaje ghehghsgggsgg
💐☺👌👌!5$trgefefgftegrwgTeiwwwwheggwyggegggeyy nl nl nl bl kl jl kl jl jl jl we IV duty
First of all we need a Centerline drawing and a set-out drawing. Set-out drawing which shows the site plan and setback of the building , with that drawing we get the base line of the building after tieing those base lines we use centre line drawing to tie all the inner wall.
@@tojobcom it's centre line of column not outer wall boundary
this video is very useful it's developed my skills important
Good job Mohan sir nd Venkatraman sir
Excuse me Sir, I stil wonder, what is the white powder to use and drop on the square iron on the ground sir ? thank you.
It would be better if you could show uscthe column lay out and the way you transferred it to site.
I like it, thanks 🙏
Very very nice video sir
I really appreciate your effort to make this informative video. It's very useful. All the best.
Super sir wav
Nice post with clear detail.....
Wow I salute you good and easy setting
After excavation how can you take refferance from which point before excavation your peg will be removed then after excavation how can you take refferance where you marked before upload such video check carefully got it my point
Thx a lot for such a simple way of explanation
What is ring size which you had used for layout
ua-cam.com/video/hzhVwP0LKBs/v-deo.html
Nice work, But if you showed the plan in this video as well, it would be more effective
what's the name of the white marking powder?
WHAT IS SIZE OF RING TAKEN BY YOU FOR MARKING ? SIR
4ft×4ft
is it the centre point of column or out of boundary point???ur dig mark is out of boundary
Affter ecuation what is refrence for colum plcing
Mr. K. Venkat Raman and others ones your video is very nice , Can you tell me what is the size of square iron frame that you had used in video with Chalk marking?
According to the building size footing size varies, so the footing size is recommended by structural engineers
great job..............
Thank you sir
What is the area of that square that u r putting white mark?
Very precise thanks
Mohan please suggest me how to fill empty columb after lenter......
7:46 just guess where to center the box.
no the frame had aligned green colour threads on it
very good post. with clear details. thanks
شكرا جزيلا الله الخير يا باشا مهندس
u guys are amazing..very clear
Very nice sar
Bahut badhiya 👍
Nice video
Very useful method sir more videos upload sir
What is the size of the square frame?
2*2
But how to find where the first point in side
ua-cam.com/video/hzhVwP0LKBs/v-deo.html
Very useful method bro..
Why didn't you check the thread with compass. The first and second mark in which degrees you have marked.
good and clear explanation thank u very much
very helpful! thanks for sharing.
Are the column footing part of earthwork in preparing BOQ?
Hii sir one small doubt sir how do you fixed second point without mark 4 fr
How to mark the first point sir
How did you. Know Mark in first to points in the ground
Super sir😊
Sir. How to establish a base point. Which u did at the beginning of video. Plz help
How should be know 1st base is perpendicular
sir, how did you know where to mark the first two points on the ground //
You can easily get that info from your mother where she wants the building.LOL
How to modify the front in the interface
Very nice 👍
Great explain , nice working
dear mohan sir, footing size ? size dimension i am asking sir?